Someone posted this morning (I just joined the list, otherwise I would reply!) and I had nearly the exact same results:
I'm running this on KnoppMyth R5F27, which uses the 2.6.18 kernel. I had to patch as per here this post: http://www.gossamer-threads.com/lists/ivtv/devel/37190#37190 in order to get it to build. After "make" and "make install" and copying the firmware (from http://ivtvdriver.org/index.php/Cx18) I had to completely power down -- a soft reboot gave a bunch of errors eeprom and i2c errors. "make unload" gave some errors, probably due to MythTV running. >From dmesg | grep cx18: cx18: Start initialization, version 0.1.0 cx18-0: Initializing card #0 cx18-0: Autodetected Hauppauge card cx18-0: cx23418 revision 01010000 (B) tuner' 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) cx18-0: Autodetected Hauppauge HVR-1600 cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0) cx18-0: Disabled encoder IDX device cx18-0: Registered device video0 for encoder MPEG (2 MB) cx18-0: Registered device video16 for TS (2 MB) cx18-0: Registered device video32 for encoder YUV (2 MB) cx18-0: Registered device vbi0 for encoder VBI (1 MB) cx18-0: Registered device video24 for encoder PCM audio (1 MB) cx18-0: Initialized card #0: Hauppauge HVR-1600 cx18: End initialization cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) cx18-0: loaded v4l-cx23418-cpu.fw firmware (174716 bytes) cx18-0: debug: 1 MiniMe Encoder Firmware 0.0.71.0 (Release 2006/12/29) cx18-0: FW version: 0.0.71.0 (Release 2006/12/29) cx18-0: Took ~20 mS for FW to start cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) After running either "cat /dev/video0 > test.mpg" this appears in dmesg: cx18-0: Unknown cmd 9b cx18-0: Unknown cmd 9f cx18-0: Unknown cmd a1 cx18-0: Unknown cmd 9d Much the same as posted earlier this morning. The only difference is in "lspci -v". I get: 02:0a.0 Multimedia video controller: Conexant Unknown device 5b7a Subsystem: Hauppauge computer works Inc. Unknown device 7444 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at f4000000 (32-bit, non-prefetchable) [size=64M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Showing "Unknown device 5b7a" instead of "Conexant CX23418 Single-Chip MPEG-2". tveeprom in dmesg shows: tveeprom 1-0050: Hauppauge model 74041, rev C5B2, serial# 2883873 Running "mplayer /dev/video0" shows video just fine (however, unrelated to this list, MythTV shows a black screen then backs out to the menu). I know there was some questions about the 74041s, but it seems to work okay here ... sorta. Thanks for all the work being done on this card! I received it as a gift and was going to return it since there's no stable drivers, but thought that helping to test it would probably help those stable drivers come out sooner. If there's any other information I can provide, let me know! - Anthony
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
