Hans: Does this board use the same chips as the functionally equivalent HVR-1800? I'm left with only PCI-e slots and am hoping to use the HVR-1800 when ivtv can handle both the digital and analog signals.
Thanks, George On Jan 14, 2008 1:59 AM, Hans Verkuil <[EMAIL PROTECTED]> wrote: > > On Monday 14 January 2008 04:45:54 Anthony Cipolone wrote: > > Someone posted this morning (I just joined the list, otherwise I > > would reply!) and I had nearly the exact same results: > > > > I'm running this on KnoppMyth R5F27, which uses the 2.6.18 kernel. I > > had to patch as per here this post: > > http://www.gossamer-threads.com/lists/ivtv/devel/37190#37190 in order > > to get it to build. > > > > After "make" and "make install" and copying the firmware (from > > http://ivtvdriver.org/index.php/Cx18) I had to completely power down > > -- a soft reboot gave a bunch of errors eeprom and i2c errors. "make > > unload" gave some errors, probably due to MythTV running. > > > > >From dmesg | grep cx18: > > > > cx18: Start initialization, version 0.1.0 > > cx18-0: Initializing card #0 > > cx18-0: Autodetected Hauppauge card > > cx18-0: cx23418 revision 01010000 (B) > > tuner' 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) > > cx18-0: Autodetected Hauppauge HVR-1600 > > cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0) > > cx18-0: Disabled encoder IDX device > > cx18-0: Registered device video0 for encoder MPEG (2 MB) > > cx18-0: Registered device video16 for TS (2 MB) > > cx18-0: Registered device video32 for encoder YUV (2 MB) > > cx18-0: Registered device vbi0 for encoder VBI (1 MB) > > cx18-0: Registered device video24 for encoder PCM audio (1 MB) > > cx18-0: Initialized card #0: Hauppauge HVR-1600 > > cx18: End initialization > > cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) > > cx18-0: loaded v4l-cx23418-cpu.fw firmware (174716 bytes) > > cx18-0: debug: 1 MiniMe Encoder Firmware 0.0.71.0 (Release > > 2006/12/29) cx18-0: FW version: 0.0.71.0 (Release 2006/12/29) > > cx18-0: Took ~20 mS for FW to start > > cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) > > > > After running either "cat /dev/video0 > test.mpg" this appears in > > dmesg: > > > > cx18-0: Unknown cmd 9b > > cx18-0: Unknown cmd 9f > > cx18-0: Unknown cmd a1 > > cx18-0: Unknown cmd 9d > > This can be ignored. I still need to handle these commands, but they are > not important. > > > > > Much the same as posted earlier this morning. The only difference is > > in "lspci -v". I get: > > > > 02:0a.0 Multimedia video controller: Conexant Unknown device 5b7a > > Subsystem: Hauppauge computer works Inc. Unknown device 7444 > > Flags: bus master, medium devsel, latency 64, IRQ 11 > > Memory at f4000000 (32-bit, non-prefetchable) [size=64M] > > Capabilities: [44] Vital Product Data > > Capabilities: [4c] Power Management version 2 > > > > Showing "Unknown device 5b7a" instead of "Conexant CX23418 > > Single-Chip MPEG-2". > > I think it is missing in the lspci database, not relevant to the driver. > > > tveeprom in dmesg shows: > > > > tveeprom 1-0050: Hauppauge model 74041, rev C5B2, serial# 2883873 > > > > Running "mplayer /dev/video0" shows video just fine (however, > > unrelated to this list, MythTV shows a black screen then backs out to > > the menu). > > > > I know there was some questions about the 74041s, but it seems to > > work okay here ... sorta. > > I think I've sorted the last init problems this weekend. > > > Thanks for all the work being done on this card! I received it as a > > gift and was going to return it since there's no stable drivers, but > > thought that helping to test it would probably help those stable > > drivers come out sooner. If there's any other information I can > > provide, let me know! > > The important bit here is that the card initializes properly. That was > blocking me from refining other parts of the driver. But I think I > cracked that this weekend. > > Regards, > > Hans > > _______________________________________________ > ivtv-devel mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
