Hi all! I get this error mesage whith the new 2.6.28 kernel and it's ivtv 1.4.0
And recording doesn't work, waht does that mean? The card worked with an abcient ivtv! Jul 3 21:02:06 atom1 kernel: [ 5993.429448] ivtv: Start initialization, version 1.4.0 Jul 3 21:02:06 atom1 kernel: [ 5993.430265] ivtv0: Initializing card #0 Jul 3 21:02:06 atom1 kernel: [ 5993.430278] ivtv0: Autodetected Hauppauge card (cx23416 based) Jul 3 21:02:06 atom1 kernel: [ 5993.430475] ivtv0 info: base addr: 0x50000000 Jul 3 21:02:06 atom1 kernel: [ 5993.430481] ivtv0 info: Enabling pci device Jul 3 21:02:06 atom1 kernel: [ 5993.430509] ivtv 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Jul 3 21:02:06 atom1 kernel: [ 5993.430527] ivtv0 info: Attempting to enable Bus Mastering Jul 3 21:02:06 atom1 kernel: [ 5993.430542] ivtv0 info: Bus Mastering Enabled. Jul 3 21:02:06 atom1 kernel: [ 5993.430557] ivtv0 info: 22 (rev 1) at 04:00.0, irq: 21, latency: 64, memory: 0x50000000 Jul 3 21:02:06 atom1 kernel: [ 5993.430565] ivtv0 info: attempting ioremap at 0x50000000 len 0x00800000 Jul 3 21:02:06 atom1 kernel: [ 5993.432057] ivtv0 info: attempting ioremap at 0x52000000 len 0x00010000 Jul 3 21:02:06 atom1 kernel: [ 5993.432103] ivtv0 info: GPIO initial dir: 0000df00 out: 000026f3 Jul 3 21:02:06 atom1 kernel: [ 5993.432110] ivtv0 info: activating i2c... Jul 3 21:02:06 atom1 kernel: [ 5993.432115] ivtv0 i2c: i2c init Jul 3 21:02:06 atom1 kernel: [ 5993.432123] ivtv0 i2c: setting scl and sda to 1 Jul 3 21:02:06 atom1 kernel: [ 5993.432238] ivtv0 info: Active card count: 1. Jul 3 21:02:06 atom1 kernel: [ 5993.492802] tveeprom 0-0050: Hauppauge model 32034, rev B248, serial# 6476004 Jul 3 21:02:06 atom1 kernel: [ 5993.492813] tveeprom 0-0050: tuner model is LG TP18PSB11D (idx 48, type 29) Jul 3 21:02:06 atom1 kernel: [ 5993.492822] tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) Jul 3 21:02:06 atom1 kernel: [ 5993.492829] tveeprom 0-0050: audio processor is MSP3415 (idx 6) Jul 3 21:02:06 atom1 kernel: [ 5993.492836] tveeprom 0-0050: decoder processor is SAA7115 (idx 19) Jul 3 21:02:06 atom1 kernel: [ 5993.492843] tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter Jul 3 21:02:06 atom1 kernel: [ 5993.492851] ivtv0: Autodetected Hauppauge WinTV PVR-250 Jul 3 21:02:06 atom1 kernel: [ 5993.492857] ivtv0 info: PAL tuner detected Jul 3 21:02:06 atom1 kernel: [ 5993.501908] ivtv0 info: Loaded module tuner Jul 3 21:02:06 atom1 kernel: [ 5993.508163] ivtv0 info: Loaded module saa7115 Jul 3 21:02:06 atom1 kernel: [ 5993.515615] ivtv0 info: Loaded module msp3400 Jul 3 21:02:06 atom1 kernel: [ 5993.625053] ivtv0 info: Stopping AO Jul 3 21:02:06 atom1 kernel: [ 5993.625057] ivtv0 info: pinging (?) APU Jul 3 21:02:06 atom1 kernel: [ 5993.625061] ivtv0 info: Stopping VPU Jul 3 21:02:06 atom1 kernel: [ 5993.625064] ivtv0 info: Resetting Hw Blocks Jul 3 21:02:06 atom1 kernel: [ 5993.625068] ivtv0 info: Stopping SPU Jul 3 21:02:06 atom1 kernel: [ 5993.637028] ivtv0 info: init Encoder SDRAM pre-charge Jul 3 21:02:06 atom1 kernel: [ 5993.637035] ivtv0 info: init Encoder SDRAM refresh to 1us Jul 3 21:02:06 atom1 kernel: [ 5993.637040] ivtv0 info: Sleeping for 600ms Jul 3 21:02:07 atom1 kernel: [ 5994.236031] ivtv0 info: Loading encoder image Jul 3 21:02:07 atom1 kernel: [ 5994.236041] ivtv 0000:04:00.0: firmware: requesting v4l-cx2341x-enc.fw Jul 3 21:02:07 atom1 kernel: [ 5994.281734] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) Jul 3 21:02:07 atom1 kernel: [ 5994.480105] ivtv0 info: Getting firmware version.. Jul 3 21:02:07 atom1 kernel: [ 5994.480180] ivtv0: Encoder revision: 0x02060039 Jul 3 21:02:07 atom1 kernel: [ 5994.480186] ivtv0 info: Changing input from 1 to 0 Jul 3 21:02:07 atom1 kernel: [ 5994.480190] ivtv0 info: Mute Jul 3 21:02:07 atom1 kernel: [ 5994.480195] ivtv0 i2c: call_i2c_client addr=21 Jul 3 21:02:07 atom1 kernel: [ 5994.480200] ivtv0: i2c addr 0x21 not found for command 0x4008646f Jul 3 21:02:07 atom1 kernel: [ 5994.480208] ivtv0 i2c: call_i2c_client addr=40 Jul 3 21:02:07 atom1 kernel: [ 5994.496648] ivtv0 info: Unmute Jul 3 21:02:07 atom1 kernel: [ 5994.496655] ivtv0 info: Mute Jul 3 21:02:07 atom1 kernel: [ 5994.496661] ivtv0 info: v4l2 ioctl: set frequency 6400 Jul 3 21:02:07 atom1 kernel: [ 5994.498710] ivtv0 info: Unmute Jul 3 21:02:07 atom1 kernel: [ 5994.498717] ivtv0 info: Switching standard to f. _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
