Hello Hans, I found out further that the saa7115 most of the time is not recognized properly, already fails in the saa7115 module in line 1477 of saa7115.c of the actual kernel. And there is only one saa7115.ko in the system.
Instead of the expected ID "1f711", the saa7115 driver gets aweisr ID: saa7115 0-0021: chip found @ 0x42 (ID aaaaaaaaaaaaaaa) does not match a known saa711x chip. The SAA7115 is definitly on the board, I can see it, but it's quite old, the card is from 2003 but worked without problems with an ancient version of ivtv, but now I updated the VDR system to 2.6.28 Best Regards, Dirk Am Samstag, 4. Juli 2009 schrieb Hans Verkuil: > On Saturday 04 July 2009 16:23:41 Dirk Aust wrote: > > I found out that already during the initialisation the SAA7115 gets > > trouble, when loading the module with debug=0x202 I get the message: > > > > ivtv0 i2c: i2c detach [client=saa7115,failed] > > > > The SAA7115 seems not to be in the list of i2c clients. > > > > > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-devel > > What happens if you do a 'modprobe saa7115' first before loading ivtv? > > Is the saa7115 module loaded anyway? I think I have seen something like > this before and it turned out that there was either no saa7115 or an old > version of saa7115 was loaded. Make sure it exists and that there are no > duplicate saa7115 modules. > > Regards, > > Hans _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
