On Sun, 2009-07-05 at 11:49 +0100, Steve Firth wrote: > Andy, > please find attached /var/log/messages and dmesg for my acer > aspire 500.
Good - the change worked and your card load correctly. > I was not sure > if I could put the ROM's into the public domain or not. No that's not a problem. I don't know what the encoding means though: Jul 5 10:05:14 Cinema kernel: [ 11.784423] cx18-0: eeprom 00: 00 ab 12 18 07 ff ff ff ff ff ff ff ff ff ff ff Jul 5 10:05:14 Cinema kernel: [ 11.784436] cx18-0: eeprom 10: 5a 00 55 aa 8b cc 55 03 00 1b 10 01 00 00 00 00 Jul 5 10:05:14 Cinema kernel: [ 11.784449] cx18-0: eeprom 20: 02 00 00 01 00 00 00 00 ff ff ff ff ff ff ff ff Jul 5 10:05:14 Cinema kernel: [ 11.784461] cx18-0: eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [...] Jul 5 10:05:14 Cinema kernel: [ 11.784615] cx18-0: eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Jul 5 10:05:14 Cinema kernel: [ 12.176060] cx18-1: eeprom 00: 00 ab 12 18 07 ff ff ff ff ff ff ff ff ff ff ff Jul 5 10:05:14 Cinema kernel: [ 12.176073] cx18-1: eeprom 10: 5a 00 55 aa 93 c8 55 03 00 1b 10 01 00 00 00 00 Jul 5 10:05:14 Cinema kernel: [ 12.176085] cx18-1: eeprom 20: 02 00 00 01 00 00 00 00 ff ff ff ff ff ff ff ff Jul 5 10:05:14 Cinema kernel: [ 12.176098] cx18-1: eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [...] Jul 5 10:05:14 Cinema kernel: [ 12.176248] cx18-1: eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Obviously the "ab 12 18 07" at offset 01 is just a copy of PCI Subsystem Vendor ID and Product ID for the MPC718 (12ab:0718). There's a minor difference for the two cards EEPROMs at offset 0x14-0x15, which may be either part of a revision or serial number. As more users with these boards report what they have, maybe I can figure out what some of the other bytes mean. > I think this is what you needed? Yup. I'm going to push a cleaned up set of changes for the cx18 driver to dump out the eeprom for MPC718 boards. Thanks for all the desoldering, photos, and testing. DVB-T for this board wouldn't have been working without your efforts. Regards, Andy > Steve _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
