On Saturday 15 January 2005 01:03 pm, Matt wrote: > Thanks for the info.. > > I get exactly the same thing from tveeprom. �It seems you and I have > exactly the same card. > > tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 7723854 > tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) > tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[0],ok]
My apologies if this is a duplicate, kmail freaked out on me. Anywho... I've got a PVR-150MCE as well, TAPE tuner and everything. No video with 0.3.2b on the tuner input here either, just static. Will bounce the box shortly to see if I can see anything w/0.3.2a. Oh, and I can't even get the modules to load without hard-locking the system under either Fedora Core 2 or 3, so I'm running Debian at the moment. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (b) loading ivtv: Linux version: 2.6.10-1-k7 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: VIA PCI device: 0x3099 vendor: 0x1106 cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 ivtv: i2c attach [client=cx25840[7],ok] ivtv: i2c attach [client=wm8775[7],ok] tveeprom: Hauppauge: model = 26552, rev = C268, serial# = 7723804 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[1],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 ivtv: ivtv_enc_thread: pid = 19505, itv = 0xe0cdff60 ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== -- Jarod C. Wilson, RHCE [EMAIL PROTECTED] ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
