ok, this is a "semi-working" modprobe.conf (only relevant parts):
options ivtv ivtv_std=2 tda9887=0 tuner=38,51 ivtv_debug=0 options tuner pal=G options saa7127 i2c_enable=1,-1 debug=0 options cx25840 i2c_enable=-1,1 debug=0 I just modprobe ivtv and it gets loaded ok. Since I put the pal=G option in there, quality of the stream is excellent (same as for 350). But I seem to have lost audio on the 150. All recordings are silent. Going to cold-boot just to make sure it's not some transient error left from me playing around with all kinds of settings. N. On Tue, 25 Jan 2005 21:06:39 +0100, Nick Rosier <[EMAIL PROTECTED]> wrote: > I manually loaded the modules and it worked; now I'm trying to get the > damn thing to load at boot and that's causing me some more headaches. > 350 is working but can't get the 150 to work when autoloading the > modules. If I find a working config, I'll post it. > The driver seems to load fine: > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.3.2 (c) loading > ivtv: Linux version: 2.6.10-gentoo-r6 K8 gcc-3.4 > ivtv: In case of problems please include the debug info > ivtv: between the START INIT IVTV and END INIT IVTV lines when > ivtv: mailing the ivtv-devel mailinglist. > ivtv: Autodetected WinTV PVR 350 card > ivtv: Found an iTVC15 based chip > ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19 > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > lirc_i2c: chip found @ 0x18 (Hauppauge IR) > ivtv: i2c attach [client=Hauppauge IR,ok] > lirc_dev: lirc_register_plugin:sample_rate: 10 > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[2],ok] > cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > msp34xx: ivtv version > msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, > simpler (G) no-thread mode > msp34xx: $Id$ compiled on: Jan 25 2005 18:58:46 > ivtv: i2c attach [client=MSP3418W-B3,ok] > saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) > saa7115: detecting saa7115 client on address 0x42 > saa7115: writing init values > ivtv: i2c attach [client=saa7115[1],ok] > saa7115: status: (1E) 0x80, (1F) 0x90 > tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7597218 > tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = CS5331 (type = 9) > ivtv: i2c attach [client=tveeprom[2],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > ivtv: i2c attach [client=(tuner unset),ok] > wm8775: starting probe for adapter ivtv i2c driver #0 (0x10005) > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model > 0x00ad2557, Revision 0x00000001 > ivtv: Radio detected > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Decoder revision: 0x02020023 > ivtv: Configuring WinTV PVR 350 card with 10 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 0 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 32 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 224 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 24 > ivtv: Create stream 4 > ivtv: Registered v4l2 device, streamtype 4 minor 64 > ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total > ivtv: Registered v4l2 device, streamtype 5 minor 16 > ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total > ivtv: Registered v4l2 device, streamtype 6 minor 228 > ivtv: Create stream 7 > ivtv: Registered v4l2 device, streamtype 7 minor 232 > ivtv: Create DMA stream 8 using 6 103680 byte buffers 622080 kbytes total > ivtv: Registered v4l2 device, streamtype 8 minor 48 > ivtv: Create DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total > ivtv: Setting Tuner 38 > tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv > i2c driver #0 > saa7115: decoder set input (4) > saa7115: now setting Composite input > ivtv: Setting audio matrix to input 3, output 1 > ivtv: Switching standard to PAL. > ivtv: ivtv_enc_thread: pid = 15612, itv = 0xe0c26ba0 > ivtv: ivtv_dec_thread: pid = 15613, itv = 0xe0c26ba0 > saa7115: decoder set norm PAL > saa7115: set audio: 0x01 > saa7127: Setting Encoder Video Standard > saa7127: Set PAL Video Mode > saa7127: Selecting PAL video Standard > ivtv: Initialized WinTV PVR 350, card #0 > ivtv: Autodetected WinTV PVR 150 card > ivtv: Found an iTVC16 based chip > ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 > ivtv: XXX PCI device: 0x00e1 vendor: 0x10de > saa7127: detecting saa7127 client on address 0x88 > saa7127: Selecting NTSC video Standard > saa7127: Selecting S-Video+Composite > saa7127: Turn WSS off > saa7127: Widescreen Mode 4:3 Full Format > saa7127: Selecting Normal Encoder Input > saa7127: Enable Video Output > ivtv: i2c attach [client=saa7127[3],ok] > cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) > tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7627086 > tveeprom: tuner = LG S001D MK3 (idx = 60, type = 4) > tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) > tveeprom: audio_processor = MSP3410D (type = 5) > ivtv: i2c attach [client=tveeprom[3],ok] > tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > ivtv: i2c attach [client=(tuner unset),ok] > wm8775: starting probe for adapter ivtv i2c driver #1 (0x10005) > wm8775: detecting client on address 0x36 > wm8775: Offset reset.reg[0]=2e00 > wm8775: Offset reset.reg[1]=0e00 > wm8775: Offset reset.reg[2]=1600 > wm8775: Offset reset.reg[3]=1800 > wm8775: Offset reset.reg[4]=1a00 > wm8775: Offset reset.reg[5]=1c00 > wm8775: Offset reset.reg[6]=1e00 > wm8775: Offset reset.reg[7]=2000 > wm8775: Offset reset.reg[8]=2200 > wm8775: Offset reset.reg[9]=2400 > wm8775: Offset reset.reg[10]=2600 > wm8775: Offset reset.reg[11]=2800 > wm8775: Offset reset.reg[12]=2a00 > wm8775: Updating reg[R23]=2e01 added Reset with default 1 > wm8775: Updating reg[R7]=0e00 added TOD with default 0 > wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 > wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 > wm8775: Updating reg[R11]=1620 added ADCWL with default 2 > wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 > wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 > wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 > wm8775: Updating reg[R12]=1800 added ADCMS with default 0 > wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 > wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 > wm8775: Updating reg[R13]=1a00 added AINPD with default 0 > wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 > wm8775: Updating reg[R13]=1a00 added PWDN with default 0 > wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 > wm8775: Updating reg[R14]=1ccf added LAG with default 207 > wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 > wm8775: Updating reg[R15]=1ecf added RAG with default 207 > wm8775: Updating reg[R16]=2000 added LCSEL with default 0 > wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 > wm8775: Updating reg[R16]=207b added LCT with default 11 > wm8775: Updating reg[R17]=2200 added LCEN with default 0 > wm8775: Updating reg[R17]=2200 added ALCZC with default 0 > wm8775: Updating reg[R17]=2200 added HLD with default 0 > wm8775: Updating reg[R18]=2430 added DCY with default 3 > wm8775: Updating reg[R18]=2432 added ATK with default 2 > wm8775: Updating reg[R19]=2600 added NGTH with default 0 > wm8775: Updating reg[R19]=2600 added NGAT with default 0 > wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 > wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 > wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 > wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 > wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 > wm8775: Updating reg[R21]=2a01 added AMX with default 1 > wm8775: Final reset.reg[0]=2e01 > wm8775: Final reset.reg[1]=0e00 > wm8775: Final reset.reg[2]=1622 > wm8775: Final reset.reg[3]=1802 > wm8775: Final reset.reg[4]=1a00 > wm8775: Final reset.reg[5]=1ccf > wm8775: Final reset.reg[6]=1ecf > wm8775: Final reset.reg[7]=207b > wm8775: Final reset.reg[8]=2200 > wm8775: Final reset.reg[9]=2432 > wm8775: Final reset.reg[10]=2600 > wm8775: Final reset.reg[11]=2826 > wm8775: Final reset.reg[12]=2a01 > wm8775: Offset reset.reg[0]=2e00 > wm8775: Offset reset.reg[1]=0e00 > wm8775: Offset reset.reg[2]=1600 > wm8775: Offset reset.reg[3]=1800 > wm8775: Offset reset.reg[4]=1a00 > wm8775: Offset reset.reg[5]=1c00 > wm8775: Offset reset.reg[6]=1e00 > wm8775: Offset reset.reg[7]=2000 > wm8775: Offset reset.reg[8]=2200 > wm8775: Offset reset.reg[9]=2400 > wm8775: Offset reset.reg[10]=2600 > wm8775: Offset reset.reg[11]=2800 > wm8775: Offset reset.reg[12]=2a00 > wm8775: Updating reg[R23]=2e01 added Reset with default 1 > wm8775: Updating reg[R7]=0e00 added TOD with default 0 > wm8775: Updating reg[R11]=1600 added ADCHPD with default 0 > wm8775: Updating reg[R11]=1600 added ADCMCLK with default 0 > wm8775: Updating reg[R11]=1620 added ADCWL with default 2 > wm8775: Updating reg[R11]=1620 added ADCBCP with default 0 > wm8775: Updating reg[R11]=1620 added ADCLRP with default 0 > wm8775: Updating reg[R11]=1622 added ADCFMT with default 2 > wm8775: Updating reg[R12]=1800 added ADCMS with default 0 > wm8775: Updating reg[R12]=1800 added ADCOSR with default 0 > wm8775: Updating reg[R12]=1802 added ADCRATE with default 2 > wm8775: Updating reg[R13]=1a00 added AINPD with default 0 > wm8775: Updating reg[R13]=1a00 added ADCPD with default 0 > wm8775: Updating reg[R13]=1a00 added PWDN with default 0 > wm8775: Updating reg[R14]=1c00 added ZCLA with default 0 > wm8775: Updating reg[R14]=1ccf added LAG with default 207 > wm8775: Updating reg[R15]=1e00 added ZCRA with default 0 > wm8775: Updating reg[R15]=1ecf added RAG with default 207 > wm8775: Updating reg[R16]=2000 added LCSEL with default 0 > wm8775: Updating reg[R16]=2070 added MAXGAIN with default 7 > wm8775: Updating reg[R16]=207b added LCT with default 11 > wm8775: Updating reg[R17]=2200 added LCEN with default 0 > wm8775: Updating reg[R17]=2200 added ALCZC with default 0 > wm8775: Updating reg[R17]=2200 added HLD with default 0 > wm8775: Updating reg[R18]=2430 added DCY with default 3 > wm8775: Updating reg[R18]=2432 added ATK with default 2 > wm8775: Updating reg[R19]=2600 added NGTH with default 0 > wm8775: Updating reg[R19]=2600 added NGAT with default 0 > wm8775: Updating reg[R20]=2820 added TRANWIN with default 2 > wm8775: Updating reg[R20]=2826 added MAXATTEN with default 6 > wm8775: Updating reg[R21]=2a00 added LRBOTH with default 0 > wm8775: Updating reg[R21]=2a00 added MUTELA with default 0 > wm8775: Updating reg[R21]=2a00 added MUTERA with default 0 > wm8775: Updating reg[R21]=2a01 added AMX with default 1 > wm8775: Final reset.reg[0]=2e01 > wm8775: Final reset.reg[1]=0e00 > wm8775: Final reset.reg[2]=1622 > wm8775: Final reset.reg[3]=1802 > wm8775: Final reset.reg[4]=1a00 > wm8775: Final reset.reg[5]=1ccf > wm8775: Final reset.reg[6]=1ecf > wm8775: Final reset.reg[7]=207b > wm8775: Final reset.reg[8]=2200 > wm8775: Final reset.reg[9]=2432 > wm8775: Final reset.reg[10]=2600 > wm8775: Final reset.reg[11]=2826 > wm8775: Final reset.reg[12]=2a01 > wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 > wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 > wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 > wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 > wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 > wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 > wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. > wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. > wm8775: Updating register 2 (R11), config: 1622 active: 1621. > wm8775: Updating register 3 (R12), config: 1802 active: 1902. > wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. > wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. > wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. > wm8775: Skipping register 7 (R16), config: 207b active: 207b. > wm8775: Skipping register 8 (R17), config: 2200 active: 2200. > wm8775: Updating register 9 (R18), config: 2432 active: 2482. > wm8775: Updating register 10 (R19), config: 2600 active: 2601. > wm8775: Skipping register 11 (R20), config: 2826 active: 2826. > wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. > ivtv: i2c attach [client=wm8775[1],ok] > tda9885/6/7: chip found @ 0x86 > ivtv: i2c attach [client=tda9887,ok] > ivtv: Encoder revision: 0x02040024 > ivtv: Encoder Firmware may be buggy, use version 0x02040011 > ivtv: Configuring WinTV PVR 150 card with 4 streams > ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total > ivtv: Registered v4l2 device, streamtype 0 minor 1 > ivtv: Create DMA stream 1 > ivtv: Registered v4l2 device, streamtype 1 minor 33 > ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 2 minor 225 > ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total > ivtv: Registered v4l2 device, streamtype 3 minor 25 > ivtv: Setting Tuner 51 > tuner: type set to 51 (LG PAL (TAPE series, pvr150)) by ivtv i2c driver #1 > ivtv: Switching standard to PAL. > ivtv: Initialized WinTV PVR 150, card #1 > ivtv: ==================== END INIT IVTV ==================== > ivtv: ivtv_enc_thread: pid = 15726, itv = 0xe0c3ae64 > > The different devices are there but trying dd if=/dev/v4l/video1 > of=vid.mpg... does nothing. As if something is locking the device. > > Anyway, the TV-out is working again so I guess that was another problem. > > N. > > On Tue, 25 Jan 2005 20:29:49 +0100, Peter Martens > <[EMAIL PROTECTED]> wrote: > > Can you post your modprobe.conf please? Are you tuning through mythtv > > or with ptune? > > Thanks > ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
