I just added another PVR150MCE (PAL) to my system but I have trouble getting this setup to work; the detection order of the cards is: 350, new 150, old 150. Initialisation of the 350 and new 150 works fine but the old 150 won't initialize properly anymore:
ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tveeprom module is loaded (it's used for the 2 other cards) and kernel eeprom is not loaded so can't be that... Seeing as it's my old card which worked fine before, I doubt it's a HW problem. Anyone got any ideas? N. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.4 (o) loading ivtv: Linux version: 2.6.11-gentoo-r6 preempt K8 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv: XXX PCI device: 0x00e1 vendor: 0x10de tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7597218 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = CS5331 (type = 9) ivtv: i2c attach [client=tveeprom[50],ok] saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[50],ok] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: May 13 2005 01:29:43 ivtv: i2c attach [client=MSP3418W-B3,ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001 ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter SMBus nForce2 adapter at 4c00 (0x0) saa7115: starting probe for adapter SMBus nForce2 adapter at 4c40 (0x0) saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create DMA stream 6 using 14563 144 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 30119, itv = 0xe0b28120 ivtv: ivtv_dec_thread: pid = 30120, itv = 0xe0b28120 saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: XXX PCI device: 0x00e1 vendor: 0x10de tveeprom: Hauppauge: model = 26559, rev = C260, serial# = 7931265 tveeprom: tuner = LG S001D MK3 (idx = 60, type = 58) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 58, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2590, Revision 0x00000001 ivtv: Radio detected cx25840: starting probe for adapter SMBus nForce2 adapter at 4c00 (0x0) cx25840: starting probe for adapter SMBus nForce2 adapter at 4c40 (0x0) cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Setting Tuner 58 tuner: type set to 58 (LG PAL TAPE-S001D) by ivtv i2c driver #1 ivtv: Switching standard to PAL. ivtv: Initialized WinTV PVR 150, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 19 (level, low) -> IRQ 19 ivtv: XXX PCI device: 0x00e1 vendor: 0x10de saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005) ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. ivtv: ivtv_enc_thread: pid = 30307, itv = 0xe0b4b150 ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 4 streams ivtv: Registered v4l2 device, streamtype 0 minor 2 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 34 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 226 ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 26 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: Switching standard to PAL. ivtv: i2c client id: 0x02 not found! ivtv: i2c client addr: 0x43 not found! ivtv: i2c client addr: 0x44 not found! ivtv: Initialized WinTV PVR 150, card #2 ivtv: ==================== END INIT IVTV ==================== modprobe.conf: alias char-major-81 videodev alias char-major-81-0 ivtv alias char-major-81-1 ivtv alias char-major-61 lirc_i2c options saa7127 i2c_enable=1,-1,-1 options wm8775 debug=0 options tuner pal=G debug=0 options ivtv ivtv_std=2,2,2 tda9887=0,0,0 ivtv_debug=1 options tda9887 pal=G debug=0 install ivtv /sbin/modprobe --ignore-install ivtv ; /sbin/modprobe ivtv-fb ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_ids93&alloc_id281&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
