On 7/2/05, Stefan van der Eijk <[EMAIL PROTECTED]> wrote: > I had the same issue with my PVR-500. I found out that I ended up using > the tuner kernel modules from the vendor (Mandriva) supplied kernel > package, which didn't support the tuners I have on the PVR500. Once I > replaced that kernel module with the one that comes with ivtv, it worked. > > regards, > > Stefan van der Eijk > > > [EMAIL PROTECTED] wrote: > > >Grumble, grumble. > > > >Hi All, > >I have a 500MCE that I'm trying to get to work. I've been trying the > >various suggestions posted in other threads on 500MCE static without any > >success. My system (FC3) recognizes the card as two 150's, but when I cat > >the /dev/video0|1 all I get is static. I've been faithfully following > >Myth(TV)ology and now I'm at the point where I set up the cards at the > >terminal and that's where I'm stuck. I've also changed from 0 to 7, with > >only 6 and 7 giving me static and the rest as black screens. I've also > >changed the channel using the Ptune-ui. > > > > > >Here's my START INIT: > > > >Jul 1 23:31:51 localhost kernel: ivtv: ==================== START INIT > >IVTV ==================== > >Jul 1 23:31:51 localhost kernel: ivtv: version 0.3.5 (l) loading > >Jul 1 23:31:51 localhost kernel: ivtv: Linux version: 2.6.11-1.27_FC3smp > >SMP 686 REGPARM 4KSTACKS gcc-3.4 > >Jul 1 23:31:51 localhost kernel: ivtv: In case of problems please include > >the debug info > >Jul 1 23:31:51 localhost kernel: ivtv: between the START INIT IVTV and > >END INIT IVTV lines when > >Jul 1 23:31:51 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. > >Jul 1 23:31:51 localhost kernel: ivtv: Autodetected WinTV PVR 150 card > >Jul 1 23:31:51 localhost kernel: ivtv: Found an iTVC16 based chip > >Jul 1 23:31:51 localhost kernel: ACPI: PCI interrupt 0000:03:08.0[A] -> > >GSI 19 (level, low) -> IRQ 201 > >Jul 1 23:31:51 localhost kernel: ivtv: XXX PCI device: 0x2578 vendor: 0x8086 > >Jul 1 23:31:51 localhost kernel: tveeprom: Hauppauge: model = 23552, rev > >= D592, serial# = 2995100 > >Jul 1 23:31:51 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 > >(idx = 92, type = 57) > >Jul 1 23:31:51 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = > >0x08, v4l2 = 0x00001000) > >Jul 1 23:31:51 localhost kernel: tveeprom: audio_processor = MSP3410D > >(type = 5) > >Jul 1 23:31:51 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] > >Jul 1 23:31:51 localhost kernel: ivtv: Tuner Type 57, Tuner formats > >0x00001000, Radio: yes, Model 0x00915652, Revision 0x00000000 > >Jul 1 23:31:51 localhost kernel: ivtv: Radio detected > >Jul 1 23:31:51 localhost kernel: tuner: chip found at addr 0xc0 i2c-bus > >ivtv i2c driver #0 > >Jul 1 23:31:51 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > >Jul 1 23:31:51 localhost kernel: i2c_adapter i2c-0: I2C level transfers > >not supported > >Jul 1 23:31:52 localhost last message repeated 323 times > >Jul 1 23:31:52 localhost kernel: cx25840: Unable to open FW file > >'/lib/modules/HcwMakoA.ROM'. > >Jul 1 23:31:52 localhost kernel: i2c_adapter i2c-0: I2C level transfers > >not supported > >Jul 1 23:31:52 localhost last message repeated 5 times > >Jul 1 23:31:52 localhost kernel: cx25840: Failed to load any FW image file > >Jul 1 23:31:52 localhost kernel: i2c_adapter i2c-0: I2C level transfers > >not supported > >Jul 1 23:31:52 localhost last message repeated 16 times > >Jul 1 23:31:52 localhost kernel: cx25840: Unable to open FW file > >'/lib/modules/HcwMakoA.ROM'. > >Jul 1 23:31:52 localhost kernel: cx25840: Failed to load any FW image file > >Jul 1 23:31:52 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] > >Jul 1 23:31:52 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] > >Jul 1 23:31:53 localhost kernel: ivtv: Encoder revision: 0x02040024 > >Jul 1 23:31:53 localhost kernel: ivtv: Encoder Firmware may be buggy, use > >version 0x02040011 > >Jul 1 23:31:53 localhost kernel: ivtv: Configuring WinTV PVR 150 card > >with 5 streams > >Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype > >0 minor 0 > >Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 0 using 128 > >16384 byte buffers 0 kbytes total > >Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype > >1 minor 32 > >Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 1 using 97 21600 > >byte buffers 0 kbytes total > >Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype > >2 minor 224 > >Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 2 using 60 34656 > >byte buffers 0 kbytes total > >Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype > >3 minor 24 > >Jul 1 23:31:53 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 > >byte buffers 0 kbytes total > >Jul 1 23:31:53 localhost kernel: ivtv: Registered v4l2 device, streamtype > >4 minor 64 > >Jul 1 23:31:53 localhost kernel: ivtv: Create stream 4 > >Jul 1 23:31:53 localhost kernel: ivtv: Setting Tuner 57 > >Jul 1 23:31:53 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 5166, > >itv = 0xf8b9b8a0 > >Jul 1 23:31:53 localhost kernel: ivtv: ivtv_enc_thread: pid = 5162, itv = > >0xf8b9b8a0 > >Jul 1 23:31:53 localhost kernel: ivtv: Switching standard to NTSC. > >Jul 1 23:31:53 localhost kernel: tuner: tuner type not set > >Jul 1 23:31:53 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0 > >Jul 1 23:31:53 localhost kernel: ivtv: Autodetected WinTV PVR 150 card > >Jul 1 23:31:53 localhost kernel: ivtv: Found an iTVC16 based chip > >Jul 1 23:31:53 localhost kernel: ACPI: PCI interrupt 0000:03:09.0[A] -> > >GSI 18 (level, low) -> IRQ 169 > >Jul 1 23:31:53 localhost kernel: ivtv: XXX PCI device: 0x2578 vendor: 0x8086 > >Jul 1 23:31:53 localhost kernel: tveeprom: Hauppauge: model = 23552, rev > >= D592, serial# = 2995100 > >Jul 1 23:31:53 localhost kernel: tveeprom: tuner = Philips FQ1236A MK4 > >(idx = 92, type = 57) > >Jul 1 23:31:53 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = > >0x08, v4l2 = 0x00001000) > >Jul 1 23:31:53 localhost kernel: tveeprom: audio_processor = MSP3410D > >(type = 5) > >Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok] > >Jul 1 23:31:53 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus > >ivtv i2c driver #1 > >Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] > >Jul 1 23:31:53 localhost kernel: cx25840: Unable to open FW file > >'/lib/modules/HcwMakoA.ROM'. > >Jul 1 23:31:53 localhost kernel: cx25840: Failed to load any FW image file > >Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok] > >Jul 1 23:31:53 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok] > >Jul 1 23:31:53 localhost kernel: ivtv: Tuner Type 57, Tuner formats > >0x00001000, Radio: yes, Model 0x00915652, Revision 0x00000000 > >Jul 1 23:31:53 localhost kernel: ivtv: Radio detected > >Jul 1 23:31:54 localhost kernel: ivtv: Encoder revision: 0x02040024 > >Jul 1 23:31:54 localhost kernel: ivtv: Encoder Firmware may be buggy, use > >version 0x02040011 > >Jul 1 23:31:54 localhost kernel: ivtv: Configuring WinTV PVR 150 card > >with 5 streams > >Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype > >0 minor 1 > >Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 0 using 128 > >16384 byte buffers 0 kbytes total > >Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype > >1 minor 33 > >Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 1 using 97 21600 > >byte buffers 0 kbytes total > >Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype > >2 minor 225 > >Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 2 using 60 34656 > >byte buffers 0 kbytes total > >Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype > >3 minor 25 > >Jul 1 23:31:54 localhost kernel: ivtv: Create DMA stream 3 using 455 4608 > >byte buffers 0 kbytes total > >Jul 1 23:31:54 localhost kernel: ivtv: Registered v4l2 device, streamtype > >4 minor 65 > >Jul 1 23:31:54 localhost kernel: ivtv: Create stream 4 > >Jul 1 23:31:54 localhost kernel: ivtv: Setting Tuner 57 > >Jul 1 23:31:54 localhost kernel: ivtv: ivtv_enc_thread: pid = 5266, itv = > >0xf8bbebf0 > >Jul 1 23:31:54 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 5267, > >itv = 0xf8bbebf0 > >Jul 1 23:31:54 localhost kernel: ivtv: Switching standard to NTSC. > >Jul 1 23:31:54 localhost kernel: tuner: tuner type not set > >Jul 1 23:31:54 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1 > >Jul 1 23:31:54 localhost kernel: ivtv: ==================== END INIT > >IVTV ==================== > > > >Thanks, > >Ben > > > > > > > >------------------------------------------------------- > >SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > >from IBM. Find simple to follow Roadmaps, straightforward articles, > >informative Webcasts and more! Get everything you need to get up to > >speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > >_______________________________________________ > >ivtv-devel mailing list > >[email protected] > >https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > > > > cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'
This is the hint. You need to install ivtv-firmware-audio-0.0.1-1.at. ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
