Sounds like 0.3.6u is what I will be trying. Thank you for the help. I'll report how it went.
On 7/3/05, Sigurd Nes <[EMAIL PROTECTED]> wrote: > Both ivtv-0.3.6v and ivtv-0.3.6w gives me no audio on both tuners for > the pvr500mce. ivtv-0.3.6u is the best version (for me) so far. > > Regards > > Sigurd > > John Clabaugh wrote: > > Thanks for the reply. I'll look into version 0.3.6u. I see the > > latest is 0.3.6w. Any reason to not try this version? > > > > On 7/2/05, Sigurd Nes <[EMAIL PROTECTED]> wrote: > > > >>ivtv-0.3.6u works fine for me (some of the other versions won't work for > >>me). > >> > >>Regards > >> > >>Sigurd > >> > >>John Clabaugh wrote: > >> > >>>I just purchased a PVR500 rev. D492 tuner to replace my PVR250. I > >>>updated ivtv to 0.3.5l from atrpms and things are going well except I > >>>don't get any audio on the second tuner. I've done some searching and > >>>I have seen this issue hinted at, but I haven't seen a solution. > >>>Anyhow, here is my dmesg: > >>> > >>>ivtv: ==================== START INIT IVTV ==================== > >>>ivtv: version 0.3.5 (l) loading > >>>ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3 > >>>ivtv: In case of problems please include the debug info > >>>ivtv: between the START INIT IVTV and END INIT IVTV lines when > >>>ivtv: mailing the ivtv-devel mailinglist. > >>>ivtv: Autodetected WinTV PVR 150 card > >>>ivtv: Found an iTVC16 based chip > >>>ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 5 (level, low) -> IRQ 5 > >>>ivtv: XXX PCI device: 0x1130 vendor: 0x8086 > >>>tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023936 > >>>tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) > >>>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > >>>tveeprom: audio_processor = MSP3410D (type = 5) > >>>ivtv: i2c attach [client=tveeprom[50],ok] > >>>ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > >>>0x00914652, Revision 0x00000000 > >>>ivtv: Radio detected > >>>tuner: Ignoring new-style parameters in presence of obsolete ones > >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > >>>ivtv: i2c attach [client=(tuner unset),ok] > >>>cx25840: Unknown parameter `no_black_magic' > >>>cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > >>>cx25840: detecting cx25840 client on address 0x88 > >>>cx25840: writing init values > >>>cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > >>>cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > >>>cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 > >>>cx25840: Status: cx258433 (DEVICE_ID) > >>>ivtv: i2c attach [client=cx25840[50],ok] > >>>ivtv: i2c attach [client=wm8775[50],ok] > >>>tda9885/6/7: chip found @ 0x86 > >>>ivtv: i2c attach [client=tda9887,ok] > >>>ivtv: Encoder revision: 0x02040024 > >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 > >>>ivtv: Configuring WinTV PVR 150 card with 5 streams > >>>ivtv: Registered v4l2 device, streamtype 0 minor 0 > >>>ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 1 minor 32 > >>>ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 2 minor 224 > >>>ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 3 minor 24 > >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 4 minor 64 > >>>ivtv: Create stream 4 > >>>ivtv: Setting Tuner 57 > >>>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 > >>>cx25840: decoder set norm NTSC > >>>cx25840: decoder set input (6) > >>>cx25840: now setting Tuner input > >>>cx25840: set audio input (0) > >>>ivtv: Switching standard to NTSC. > >>>ivtv: Initialized WinTV PVR 150, card #0 > >>>ivtv: Autodetected WinTV PVR 150 card > >>>ivtv: Found an iTVC16 based chip > >>>ivtv: ivtv_enc_thread: pid = 5803, itv = 0xe0c1af20 > >>>ivtv: ivtv_enc_vbi_thread: pid = 5804, itv = 0xe0c1af20 > >>>ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 11 (level, low) -> IRQ 11 > >>>ivtv: XXX PCI device: 0x1130 vendor: 0x8086 > >>>tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023936 > >>>tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) > >>>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > >>>tveeprom: audio_processor = MSP3410D (type = 5) > >>>ivtv: i2c attach [client=tveeprom[50],ok] > >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > >>>ivtv: i2c attach [client=(tuner unset),ok] > >>>cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > >>>cx25840: detecting cx25840 client on address 0x88 > >>>cx25840: writing init values > >>>cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > >>>cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > >>>cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 > >>>cx25840: Status: cx258433 (DEVICE_ID) > >>>ivtv: i2c attach [client=cx25840[50],ok] > >>>ivtv: i2c attach [client=wm8775[50],ok] > >>>tda9885/6/7: chip found @ 0x86 > >>>ivtv: i2c attach [client=tda9887,ok] > >>>ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > >>>0x00914652, Revision 0x00000000 > >>>ivtv: Radio detected > >>>ivtv: Encoder revision: 0x02040024 > >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 > >>>ivtv: Configuring WinTV PVR 150 card with 5 streams > >>>ivtv: Registered v4l2 device, streamtype 0 minor 1 > >>>ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 1 minor 33 > >>>ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 2 minor 225 > >>>ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 3 minor 25 > >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > >>>ivtv: Registered v4l2 device, streamtype 4 minor 65 > >>>ivtv: Create stream 4 > >>>ivtv: Setting Tuner 57 > >>>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 > >>>cx25840: decoder set norm NTSC > >>>cx25840: decoder set input (6) > >>>cx25840: now setting Tuner input > >>>cx25840: set audio input (0) > >>>ivtv: Switching standard to NTSC. > >>>ivtv: Initialized WinTV PVR 150, card #1 > >>>ivtv: ==================== END INIT IVTV ==================== > >>> > >>> > >>>modprobe.conf: > >>> > >>>alias char-major-81 videodev > >>>alias char-major-81-0 ivtv > >>>alias char-major-81-1 ivtv > >>>alias char-major-81-2 off > >>>alias char-major-81-3 off > >>>alias tveeprom tveeprom-ivtv > >>>alias msp3400 msp3400-ivtv > >>>alias tuner tuner-ivtv > >>>alias tda9887 tda9887-ivtv > >>> > >>>options cx25840 no_black_magic=1 audiofmt=0x04 > >>>options ivtv tda9887=0,0 ivtv_debug=1,1 > >>> > >>> > >>>Let me know if I need to provide any additional info. Thanks for > >>>spending the time to develop and support these drivers! > >>> > >>> > >>>------------------------------------------------------- > >>>SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > >>>from IBM. Find simple to follow Roadmaps, straightforward articles, > >>>informative Webcasts and more! Get everything you need to get up to > >>>speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click > >>>_______________________________________________ > >>>ivtv-devel mailing list > >>>[email protected] > >>>https://lists.sourceforge.net/lists/listinfo/ivtv-devel > >>> > >>> > >>> > >> > >> > >> > >>------------------------------------------------------- > >>SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > >>from IBM. Find simple to follow Roadmaps, straightforward articles, > >>informative Webcasts and more! Get everything you need to get up to > >>speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > >>_______________________________________________ > >>ivtv-devel mailing list > >>[email protected] > >>https://lists.sourceforge.net/lists/listinfo/ivtv-devel > >> > > > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > > > > ------------------------------------------------------- > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > from IBM. Find simple to follow Roadmaps, straightforward articles, > informative Webcasts and more! Get everything you need to get up to > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > _______________________________________________ > ivtv-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
