I've installed 0.3.6u and did a cold reboot. Now tuner0 shows static and no audio, while tuner1 has video, but no audio. Does your modprobe.conf have anything unique that you used to get it going? Which version of firmware are you using? Thanks again for your help.
On 7/3/05, John Clabaugh <[EMAIL PROTECTED]> wrote: > Sounds like 0.3.6u is what I will be trying. Thank you for the help. > I'll report how it went. > > On 7/3/05, Sigurd Nes <[EMAIL PROTECTED]> wrote: > > Both ivtv-0.3.6v and ivtv-0.3.6w gives me no audio on both tuners for > > the pvr500mce. ivtv-0.3.6u is the best version (for me) so far. > > > > Regards > > > > Sigurd > > > > John Clabaugh wrote: > > > Thanks for the reply. I'll look into version 0.3.6u. I see the > > > latest is 0.3.6w. Any reason to not try this version? > > > > > > On 7/2/05, Sigurd Nes <[EMAIL PROTECTED]> wrote: > > > > > >>ivtv-0.3.6u works fine for me (some of the other versions won't work for > > >>me). > > >> > > >>Regards > > >> > > >>Sigurd > > >> > > >>John Clabaugh wrote: > > >> > > >>>I just purchased a PVR500 rev. D492 tuner to replace my PVR250. I > > >>>updated ivtv to 0.3.5l from atrpms and things are going well except I > > >>>don't get any audio on the second tuner. I've done some searching and > > >>>I have seen this issue hinted at, but I haven't seen a solution. > > >>>Anyhow, here is my dmesg: > > >>> > > >>>ivtv: ==================== START INIT IVTV ==================== > > >>>ivtv: version 0.3.5 (l) loading > > >>>ivtv: Linux version: 2.6.10-1.771_FC2 686 REGPARM 4KSTACKS gcc-3.3 > > >>>ivtv: In case of problems please include the debug info > > >>>ivtv: between the START INIT IVTV and END INIT IVTV lines when > > >>>ivtv: mailing the ivtv-devel mailinglist. > > >>>ivtv: Autodetected WinTV PVR 150 card > > >>>ivtv: Found an iTVC16 based chip > > >>>ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 5 (level, low) -> IRQ 5 > > >>>ivtv: XXX PCI device: 0x1130 vendor: 0x8086 > > >>>tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023936 > > >>>tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) > > >>>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > > >>>tveeprom: audio_processor = MSP3410D (type = 5) > > >>>ivtv: i2c attach [client=tveeprom[50],ok] > > >>>ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > > >>>0x00914652, Revision 0x00000000 > > >>>ivtv: Radio detected > > >>>tuner: Ignoring new-style parameters in presence of obsolete ones > > >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 > > >>>ivtv: i2c attach [client=(tuner unset),ok] > > >>>cx25840: Unknown parameter `no_black_magic' > > >>>cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) > > >>>cx25840: detecting cx25840 client on address 0x88 > > >>>cx25840: writing init values > > >>>cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > > >>>cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > > >>>cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 > > >>>cx25840: Status: cx258433 (DEVICE_ID) > > >>>ivtv: i2c attach [client=cx25840[50],ok] > > >>>ivtv: i2c attach [client=wm8775[50],ok] > > >>>tda9885/6/7: chip found @ 0x86 > > >>>ivtv: i2c attach [client=tda9887,ok] > > >>>ivtv: Encoder revision: 0x02040024 > > >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 > > >>>ivtv: Configuring WinTV PVR 150 card with 5 streams > > >>>ivtv: Registered v4l2 device, streamtype 0 minor 0 > > >>>ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 1 minor 32 > > >>>ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 2 minor 224 > > >>>ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 3 minor 24 > > >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 4 minor 64 > > >>>ivtv: Create stream 4 > > >>>ivtv: Setting Tuner 57 > > >>>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 > > >>>cx25840: decoder set norm NTSC > > >>>cx25840: decoder set input (6) > > >>>cx25840: now setting Tuner input > > >>>cx25840: set audio input (0) > > >>>ivtv: Switching standard to NTSC. > > >>>ivtv: Initialized WinTV PVR 150, card #0 > > >>>ivtv: Autodetected WinTV PVR 150 card > > >>>ivtv: Found an iTVC16 based chip > > >>>ivtv: ivtv_enc_thread: pid = 5803, itv = 0xe0c1af20 > > >>>ivtv: ivtv_enc_vbi_thread: pid = 5804, itv = 0xe0c1af20 > > >>>ACPI: PCI interrupt 0000:03:09.0[A] -> GSI 11 (level, low) -> IRQ 11 > > >>>ivtv: XXX PCI device: 0x1130 vendor: 0x8086 > > >>>tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023936 > > >>>tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) > > >>>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) > > >>>tveeprom: audio_processor = MSP3410D (type = 5) > > >>>ivtv: i2c attach [client=tveeprom[50],ok] > > >>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 > > >>>ivtv: i2c attach [client=(tuner unset),ok] > > >>>cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) > > >>>cx25840: detecting cx25840 client on address 0x88 > > >>>cx25840: writing init values > > >>>cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13353 loaded. > > >>>cx25840: FW image md5 digest: aa4d1e3dd17667957d8fe5b8d2d19395 > > >>>cx25840: FW image sha1 digest: 60eafed58e943664aae4754b32271e09a95496b4 > > >>>cx25840: Status: cx258433 (DEVICE_ID) > > >>>ivtv: i2c attach [client=cx25840[50],ok] > > >>>ivtv: i2c attach [client=wm8775[50],ok] > > >>>tda9885/6/7: chip found @ 0x86 > > >>>ivtv: i2c attach [client=tda9887,ok] > > >>>ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model > > >>>0x00914652, Revision 0x00000000 > > >>>ivtv: Radio detected > > >>>ivtv: Encoder revision: 0x02040024 > > >>>ivtv: Encoder Firmware may be buggy, use version 0x02040011 > > >>>ivtv: Configuring WinTV PVR 150 card with 5 streams > > >>>ivtv: Registered v4l2 device, streamtype 0 minor 1 > > >>>ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 1 minor 33 > > >>>ivtv: Create DMA stream 1 using 97 21600 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 2 minor 225 > > >>>ivtv: Create DMA stream 2 using 60 34656 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 3 minor 25 > > >>>ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total > > >>>ivtv: Registered v4l2 device, streamtype 4 minor 65 > > >>>ivtv: Create stream 4 > > >>>ivtv: Setting Tuner 57 > > >>>tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 > > >>>cx25840: decoder set norm NTSC > > >>>cx25840: decoder set input (6) > > >>>cx25840: now setting Tuner input > > >>>cx25840: set audio input (0) > > >>>ivtv: Switching standard to NTSC. > > >>>ivtv: Initialized WinTV PVR 150, card #1 > > >>>ivtv: ==================== END INIT IVTV ==================== > > >>> > > >>> > > >>>modprobe.conf: > > >>> > > >>>alias char-major-81 videodev > > >>>alias char-major-81-0 ivtv > > >>>alias char-major-81-1 ivtv > > >>>alias char-major-81-2 off > > >>>alias char-major-81-3 off > > >>>alias tveeprom tveeprom-ivtv > > >>>alias msp3400 msp3400-ivtv > > >>>alias tuner tuner-ivtv > > >>>alias tda9887 tda9887-ivtv > > >>> > > >>>options cx25840 no_black_magic=1 audiofmt=0x04 > > >>>options ivtv tda9887=0,0 ivtv_debug=1,1 > > >>> > > >>> > > >>>Let me know if I need to provide any additional info. Thanks for > > >>>spending the time to develop and support these drivers! > > >>> > > >>> > > >>>------------------------------------------------------- > > >>>SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > >>>from IBM. Find simple to follow Roadmaps, straightforward articles, > > >>>informative Webcasts and more! Get everything you need to get up to > > >>>speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click > > >>>_______________________________________________ > > >>>ivtv-devel mailing list > > >>>[email protected] > > >>>https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > >>> > > >>> > > >>> > > >> > > >> > > >> > > >>------------------------------------------------------- > > >>SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > >>from IBM. Find simple to follow Roadmaps, straightforward articles, > > >>informative Webcasts and more! Get everything you need to get up to > > >>speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > > >>_______________________________________________ > > >>ivtv-devel mailing list > > >>[email protected] > > >>https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > >> > > > > > > > > > > > > ------------------------------------------------------- > > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > > informative Webcasts and more! Get everything you need to get up to > > > speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click > > > _______________________________________________ > > > ivtv-devel mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: Discover Easy Linux Migration Strategies > > from IBM. Find simple to follow Roadmaps, straightforward articles, > > informative Webcasts and more! Get everything you need to get up to > > speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click > > _______________________________________________ > > ivtv-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/ivtv-devel > > > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
