I have been having a problem with jumpy video and audio ever since I
wiped my box a while back.  I am using a PVR-250 I have had for a
couple years now.  I had
FC3 running fine with Mythtv and had to wipe the box for other
reasons.  After the wipe, the video was jumpy.  It didn't matter if I
tried the stable 0.2 or unstable 0.3.

I recently wiped the box again when FC4 came out to see if I could get
a clean slate on it.  The problem is still there.  I am using the
recommended firmware (pvr48wdm_1.8.22037.exe) and the latest driver
(ivtv-0.3.6w).

Any help/thoughts?  Anyone know how to capture a single frame so I
could post an example?

Below is some spew from my log.

Thanks,
Jeff



Jul  1 21:02:00 24-177-165-133 kernel: Linux video capture interface: v1.00
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: ====================
START INIT IVTV ====================
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: version 0.3.6 (w) loading
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: Linux version:
2.6.11-1.1369_FC4 686 REGPARM 4KSTACKS gcc-4.0
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: In case of problems please include
the debug info
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: between the START INIT
IVTV and END INIT IVTV lines when
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: mailing the ivtv-devel
mailinglist.Jul  1 21:02:00 24-177-165-133 kernel: ivtv: Autodetected
WinTV PVR 250 card
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: Found an iTVC16 based chip
Jul  1 21:02:00 24-177-165-133 kernel: ACPI: PCI Interrupt Link [LNKC]
enabled at IRQ 6
Jul  1 21:02:00 24-177-165-133 kernel: PCI: setting IRQ 6 as level-triggered
Jul  1 21:02:00 24-177-165-133 kernel: ACPI: PCI Interrupt
0000:01:08.0[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: XXX PCI device: 0x01a4
vendor: 0x10de
Jul  1 21:02:00 24-177-165-133 kernel: tveeprom: Hauppauge: model =
32031, rev = B110, serial# = 6151179
Jul  1 21:02:00 24-177-165-133 kernel: tveeprom: tuner = Philips
FI1236 MK2 (idx = 10, type = 2)
Jul  1 21:02:00 24-177-165-133 kernel: tveeprom: tuner fmt = NTSC(M)
(eeprom = 0x08, v4l2 = 0x00001000)
Jul  1 21:02:00 24-177-165-133 kernel: tveeprom: audio_processor =
MSP3435 (type = 10)
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: i2c attach
[client=tveeprom[50],ok]Jul  1 21:02:00 24-177-165-133 kernel: ivtv:
Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model 0x00891450,
Revision 0x00000000
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: NTSC tuner detected
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: Radio detected
Jul  1 21:02:00 24-177-165-133 kernel: tuner: Ignoring new-style
parameters in presence of obsolete ones
Jul  1 21:02:00 24-177-165-133 kernel: tuner: chip found at addr 0xc2
i2c-bus ivtv i2c driver #0
Jul  1 21:02:00 24-177-165-133 kernel: ivtv: i2c attach [client=(tuner
unset),ok]
Jul  1 21:02:01 24-177-165-133 kernel: saa7115: starting probe for
adapter SMBus nVidia nForce adapter at 5500 (0x0)
Jul  1 21:02:01 24-177-165-133 kernel: saa7115: starting probe for adapter ivtv
i2c driver #0 (0x10005)
Jul  1 21:02:01 24-177-165-133 kernel: saa7115: detecting saa7115
client on address 0x42
Jul  1 21:02:01 24-177-165-133 kernel: saa7115: writing init values
Jul  1 21:02:01 24-177-165-133 kernel: ivtv: i2c attach [client=saa7115[50],ok]
Jul  1 21:02:01 24-177-165-133 kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
Jul  1 21:02:01 24-177-165-133 kernel: msp34xx: ivtv version
Jul  1 21:02:01 24-177-165-133 kernel: msp34xx: init:
chip=MSP3435G-B6, has NICAM support, simple (D) mode, simpler (G)
no-thread mode
Jul  1 21:02:01 24-177-165-133 kernel: msp34xx: $Id$ compiled on: Jul 
1 2005 20:18:53
Jul  1 21:02:01 24-177-165-133 kernel: ivtv: i2c attach [client=MSP3435G-B6,ok]
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Encoder revision: 0x02040011
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Configuring WinTV PVR 250
card with 5 streams
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Registered v4l2 device for encoder
MPEG minor 0
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Create DMA encoder MPEG
stream: 0 x 32768 buffers (0KB total)
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Registered v4l2 device for encoder
YUV minor 32
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Create DMA encoder YUV stream: 0 x
10800 buffers (0KB total)
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Registered v4l2 device for encoder
VBI minor 224
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Create DMA encoder VBI stream: 0 x
8736 buffers (0KB total)
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Registered v4l2 device for encoder
PCM audio minor 24
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Create DMA encoder PCM
audio stream: 0 x 4608 buffers (0KB total)
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Registered v4l2 device for encoder
radio minor 64
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Create encoder radio stream
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Setting Tuner 2
Jul  1 21:02:02 24-177-165-133 kernel: tuner: type set to 2 (Philips
NTSC (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
Jul  1 21:02:02 24-177-165-133 kernel: saa7115: decoder set norm NTSC
Jul  1 21:02:02 24-177-165-133 kernel: saa7115: set audio: 0x01
Jul  1 21:02:02 24-177-165-133 kernel: saa7115: decoder set input (4)
Jul  1 21:02:02 24-177-165-133 kernel: saa7115: now setting Composite input
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Setting audio matrix to
input 3, output 1
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Switching standard to NTSC.
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: ivtv_enc_thread: pid = 2923, itv =
0xe0db3c20
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: ivtv_enc_vbi_thread: pid
= 2924, itv = 0xe0db3c20
Jul  1 21:02:02 24-177-165-133 kernel: saa7115: decoder set norm NTSC
Jul  1 21:02:02 24-177-165-133 kernel: saa7115: set audio: 0x01
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: Initialized WinTV PVR 250, card #0
Jul  1 21:02:02 24-177-165-133 kernel: ivtv: ====================  END
INIT IVTV  ====================
Jul  1 21:02:42 24-177-165-133 kernel: saa7115: decoder set picture
bright=128 contrast=63 saturation=64 hue=0
Jul  1 21:02:42 24-177-165-133 kernel: saa7115: decoder set picture
bright=128 contrast=63 saturation=63 hue=0
Jul  1 21:02:42 24-177-165-133 kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Jul  1 21:02:42 24-177-165-133 kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Jul  1 21:02:42 24-177-165-133 kernel: saa7115: decoder disable output
Jul  1 21:02:42 24-177-165-133 kernel: saa7115: decoder enable output
Jul  1 21:02:48 24-177-165-133 kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Jul  1 21:02:48 24-177-165-133 last message repeated 3 times
Jul  1 21:02:49 24-177-165-133 kernel: saa7115: decoder disable output
Jul  1 21:02:49 24-177-165-133 kernel: saa7115: decoder enable output
Jul  1 21:02:58 24-177-165-133 kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Jul  1 21:02:58 24-177-165-133 last message repeated 3 times
Jul  1 21:02:58 24-177-165-133 kernel: saa7115: decoder set size
Jul  1 21:02:58 24-177-165-133 kernel: ivtv: Allocate DMA encoder MPEG
stream: 128 x 32768 buffers (4096KB total)
Jul  1 21:02:58 24-177-165-133 kernel: ivtv: Setup VBI API header
0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
Jul  1 21:02:58 24-177-165-133 kernel: ivtv: Setup VBI start
0x0018ea04 frames 4 fpi 1 lines 0x000000f1
Jul  1 21:02:59 24-177-165-133 kernel: saa7115: decoder disable output
Jul  1 21:02:59 24-177-165-133 kernel: saa7115: decoder enable output
Jul  1 21:03:11 24-177-165-133 kernel: saa7115: decoder set picture
bright=127 contrast=63 saturation=63 hue=0
Jul  1 21:03:11 24-177-165-133 last message repeated 3 times
Jul  1 21:03:11 24-177-165-133 kernel: saa7115: decoder disable output
Jul  1 21:03:11 24-177-165-133 kernel: saa7115: decoder enable output
Jul  1 21:03:11 24-177-165-133 kernel: ivtv: Allocate DMA encoder MPEG
stream: 128 x 32768 buffers (4096KB total)
Jul  1 21:03:11 24-177-165-133 kernel: ivtv: Setup VBI API header
0x0000bd0d pkts 1 buffs 4 ln 24 sz 1456
Jul  1 21:03:11 24-177-165-133 kernel: ivtv: Setup VBI start
0x0018ea04 frames 4 fpi 1 lines 0x000000f1
Jul  1 21:03:12 24-177-165-133 kernel: saa7115: decoder disable output
Jul  1 21:03:12 24-177-165-133 kernel: saa7115: decoder enable output


-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to