I haven't got sound on the 500 tuners with ivtv-0.3.6x - I have also
tried loading tda9887 with '/sbin/modprobe tda9887 port1=0 port2=0'
The latest good one is ivtv-0.3.6u
Anybody noticing anything obvious from the log?
Regards
Sigurd
Jul 5 20:12:18 localhost kernel: ivtv: ==================== START INIT
IVTV ====================
Jul 5 20:12:18 localhost kernel: ivtv: version 0.3.6 (x) loading
Jul 5 20:12:18 localhost kernel: ivtv: Linux version: 2.6.12 K7 gcc-3.4
Jul 5 20:12:18 localhost kernel: ivtv: In case of problems please
include the debug info
Jul 5 20:12:18 localhost kernel: ivtv: between the START INIT IVTV and
END INIT IVTV lines when
Jul 5 20:12:18 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Jul 5 20:12:18 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
Jul 5 20:12:18 localhost kernel: ivtv: Found an iTVC15 based chip
Jul 5 20:12:18 localhost kernel: ivtv: Unreasonably low latency timer,
setting to 64 (was 32)
Jul 5 20:12:18 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor:
0x1106
Jul 5 20:12:18 localhost kernel: msp34xx: ivtv version
Jul 5 20:12:18 localhost kernel: msp34xx: init: chip=MSP3418W-B3, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
Jul 5 20:12:18 localhost kernel: msp34xx: $Id$ compiled on: Jul 5 2005
19:59:14
Jul 5 20:12:19 localhost kernel: ivtv: i2c attach [client=MSP3418W-B3,ok]
Jul 5 20:12:19 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jul 5 20:12:19 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Jul 5 20:12:19 localhost kernel: saa7115: writing init values
Jul 5 20:12:19 localhost kernel: ivtv: i2c attach [client=saa7115[50],ok]
Jul 5 20:12:19 localhost kernel: saa7115: status: (1E) 0x40, (1F) 0xc0
Jul 5 20:12:19 localhost kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 5 20:12:19 localhost kernel: saa7127: Selecting NTSC video Standard
Jul 5 20:12:19 localhost kernel: saa7127: Selecting S-Video+Composite
Jul 5 20:12:19 localhost kernel: saa7127: Turn WSS off
Jul 5 20:12:19 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format
Jul 5 20:12:19 localhost kernel: saa7127: Selecting Normal Encoder Input
Jul 5 20:12:19 localhost kernel: saa7127: Enable Video Output
Jul 5 20:12:19 localhost kernel: ivtv: i2c attach [client=saa7127[50],ok]
Jul 5 20:12:19 localhost kernel: tda9885/6/7: chip found @ 0x86
Jul 5 20:12:19 localhost kernel: ivtv: i2c attach [client=tda9887,ok]
Jul 5 20:12:19 localhost kernel: tveeprom: Hauppauge: model = 48139,
rev = K257, serial# = 7596580
Jul 5 20:12:19 localhost kernel: tveeprom: tuner = Philips FM1216 ME
MK3 (idx = 57, type = 38)
Jul 5 20:12:19 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I)
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Jul 5 20:12:19 localhost kernel: tveeprom: audio_processor = CS5331
(type = 9)
Jul 5 20:12:19 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jul 5 20:12:19 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #0
Jul 5 20:12:19 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jul 5 20:12:19 localhost kernel: ivtv: Tuner Type 38, Tuner formats
0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001
Jul 5 20:12:19 localhost kernel: ivtv: Radio detected
Jul 5 20:12:20 localhost kernel: ivtv: Encoder revision: 0x02050032
Jul 5 20:12:20 localhost kernel: ivtv: Encoder Firmware may be buggy,
use version 0x02040011
Jul 5 20:12:20 localhost kernel: ivtv: Decoder revision: 0x02020023
Jul 5 20:12:20 localhost kernel: ivtv: Configuring WinTV PVR 350 card
with 10 streams
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
encoder MPEG minor 0
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA encoder MPEG stream:
0 x 32768 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
encoder YUV minor 32
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA encoder YUV stream: 0
x 12960 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
encoder VBI minor 224
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA encoder VBI stream: 0
x 12740 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
encoder PCM audio minor 24
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
encoder radio minor 64
Jul 5 20:12:20 localhost kernel: ivtv: Create encoder radio stream
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
decoder MPEG minor 16
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA decoder MPEG stream:
0 x 65536 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
decoder VBI minor 228
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA decoder VBI stream: 0
x 2048 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
decoder VOUT minor 232
Jul 5 20:12:20 localhost kernel: ivtv: Create decoder VOUT stream
Jul 5 20:12:20 localhost kernel: ivtv: Registered v4l2 device for
decoder YUV minor 48
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA decoder YUV stream: 0
x 51840 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Create DMA decoder OSD stream: 0
x 65536 buffers (0KB total)
Jul 5 20:12:20 localhost kernel: ivtv: Setting Tuner 38
Jul 5 20:12:20 localhost kernel: tuner: type set to 38 (Philips
PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
Jul 5 20:12:20 localhost kernel: saa7115: decoder set norm PAL
Jul 5 20:12:20 localhost kernel: saa7115: set audio: 0x01
Jul 5 20:12:20 localhost kernel: saa7115: decoder set input (4)
Jul 5 20:12:20 localhost kernel: saa7115: now setting Composite input
Jul 5 20:12:20 localhost kernel: ivtv: Setting audio matrix to input 3,
output 1
Jul 5 20:12:20 localhost kernel: ivtv: Switching standard to PAL.
Jul 5 20:12:20 localhost kernel: ivtv: ivtv_enc_thread: pid = 5698, itv
= 0xe0d20ce0
Jul 5 20:12:20 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 5699,
itv = 0xe0d20ce0
Jul 5 20:12:20 localhost kernel: ivtv: ivtv_dec_thread: pid = 5700, itv
= 0xe0d20ce0
Jul 5 20:12:20 localhost kernel: ivtv: ivtv_dec_vbi_thread: pid = 5701,
itv = 0xe0d20ce0
Jul 5 20:12:20 localhost kernel: saa7115: decoder set norm PAL
Jul 5 20:12:20 localhost kernel: saa7115: set audio: 0x01
Jul 5 20:12:20 localhost kernel: saa7127: Setting Encoder Video Standard
Jul 5 20:12:20 localhost kernel: saa7127: Set PAL Video Mode
Jul 5 20:12:20 localhost kernel: saa7127: Selecting PAL video Standard
Jul 5 20:12:20 localhost kernel: ivtv: Initialized WinTV PVR 350, card #0
Jul 5 20:12:20 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
Jul 5 20:12:20 localhost kernel: ivtv: Found an iTVC16 based chip
Jul 5 20:12:21 localhost kernel: ivtv: Unreasonably low latency timer,
setting to 64 (was 32)
Jul 5 20:12:21 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor:
0x1106
Jul 5 20:12:21 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #1 (0x10005)
Jul 5 20:12:21 localhost kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 5 20:12:21 localhost kernel: saa7127: saa7127 client id:
saa7127_i2c_id 1, skipped
Jul 5 20:12:21 localhost kernel: tda9885/6/7: chip found @ 0x86
Jul 5 20:12:21 localhost kernel: ivtv: i2c attach [client=tda9887,ok]
Jul 5 20:12:21 localhost kernel: tveeprom: Hauppauge: model = 23559,
rev = D391, serial# = 7743994
Jul 5 20:12:21 localhost kernel: tveeprom: tuner = Philips FQ1216AME
MK4 (idx = 91, type = 56)
Jul 5 20:12:21 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I)
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Jul 5 20:12:21 localhost kernel: tveeprom: audio_processor = MSP3410D
(type = 5)
Jul 5 20:12:21 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jul 5 20:12:21 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #1
Jul 5 20:12:21 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jul 5 20:12:21 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok]
Jul 5 20:12:21 localhost kernel: ivtv: Tuner Type 56, Tuner formats
0x00400e17, Radio: yes, Model 0x00913651, Revision 0x00000000
Jul 5 20:12:21 localhost kernel: ivtv: Radio detected
Jul 5 20:12:21 localhost kernel: cx25840: requesting
/lib/modules/HcwMakoA.ROM
Jul 5 20:12:22 localhost kernel: cx25840: firmware loaded
Jul 5 20:12:22 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok]
Jul 5 20:12:23 localhost kernel: UDF-fs INFO UDF 0.9.8.1 (2004/29/09)
Mounting volume 'DVDVolume', timestamp 2036/02/07 03:58 (1078)
Jul 5 20:12:23 localhost kernel: ivtv: Encoder revision: 0x02050032
Jul 5 20:12:23 localhost kernel: ivtv: Encoder Firmware may be buggy,
use version 0x02040011
Jul 5 20:12:23 localhost kernel: ivtv: Configuring WinTV PVR 150 card
with 5 streams
Jul 5 20:12:23 localhost kernel: ivtv: Registered v4l2 device for
encoder MPEG minor 1
Jul 5 20:12:23 localhost kernel: ivtv: Create DMA encoder MPEG stream:
0 x 32768 buffers (0KB total)
Jul 5 20:12:23 localhost kernel: ivtv: Registered v4l2 device for
encoder YUV minor 33
Jul 5 20:12:23 localhost kernel: ivtv: Create DMA encoder YUV stream: 0
x 12960 buffers (0KB total)
Jul 5 20:12:23 localhost kernel: ivtv: Registered v4l2 device for
encoder VBI minor 225
Jul 5 20:12:23 localhost kernel: ivtv: Create DMA encoder VBI stream: 0
x 12740 buffers (0KB total)
Jul 5 20:12:23 localhost kernel: ivtv: Registered v4l2 device for
encoder PCM audio minor 25
Jul 5 20:12:23 localhost kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Jul 5 20:12:23 localhost kernel: ivtv: Registered v4l2 device for
encoder radio minor 65
Jul 5 20:12:23 localhost kernel: ivtv: Create encoder radio stream
Jul 5 20:12:23 localhost kernel: ivtv: Setting Tuner 56
Jul 5 20:12:23 localhost kernel: tuner: type set to 56 (Philips
PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1
Jul 5 20:12:23 localhost kernel: ivtv: Switching standard to PAL.
Jul 5 20:12:23 localhost kernel: ivtv: Initialized WinTV PVR 150, card #1
Jul 5 20:12:23 localhost kernel: ivtv: Autodetected WinTV PVR 150 card
Jul 5 20:12:23 localhost kernel: ivtv: Found an iTVC16 based chip
Jul 5 20:12:23 localhost kernel: ivtv: ivtv_enc_thread: pid = 5910, itv
= 0xe0d43fec
Jul 5 20:12:23 localhost kernel: ivtv: ivtv_enc_vbi_thread: pid = 5911,
itv = 0xe0d43fec
Jul 5 20:12:23 localhost kernel: ivtv: Unreasonably low latency timer,
setting to 64 (was 32)
Jul 5 20:12:23 localhost kernel: ivtv: VIA PCI device: 0x3205 vendor:
0x1106
Jul 5 20:12:23 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #2 (0x10005)
Jul 5 20:12:23 localhost kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 5 20:12:23 localhost kernel: saa7127: saa7127 client id:
saa7127_i2c_id 2, skipped
Jul 5 20:12:23 localhost kernel: tda9885/6/7: chip found @ 0x86
Jul 5 20:12:23 localhost kernel: ivtv: i2c attach [client=tda9887,ok]
Jul 5 20:12:23 localhost kernel: tveeprom: Hauppauge: model = 23559,
rev = D391, serial# = 7743994
Jul 5 20:12:23 localhost kernel: tveeprom: tuner = Philips FQ1216AME
MK4 (idx = 91, type = 56)
Jul 5 20:12:23 localhost kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I)
SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Jul 5 20:12:23 localhost kernel: tveeprom: audio_processor = MSP3410D
(type = 5)
Jul 5 20:12:23 localhost kernel: ivtv: i2c attach [client=tveeprom[50],ok]
Jul 5 20:12:23 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus
ivtv i2c driver #2
Jul 5 20:12:23 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok]
Jul 5 20:12:23 localhost kernel: ivtv: i2c attach [client=wm8775[50],ok]
Jul 5 20:12:23 localhost kernel: cx25840: requesting
/lib/modules/HcwMakoA.ROM
Jul 5 20:12:25 localhost kernel: cx25840: firmware loaded
Jul 5 20:12:25 localhost kernel: ivtv: i2c attach [client=cx25840[50],ok]
Jul 5 20:12:25 localhost kernel: ivtv: Tuner Type 56, Tuner formats
0x00400e17, Radio: yes, Model 0x00913651, Revision 0x00000000
Jul 5 20:12:25 localhost kernel: ivtv: Radio detected
Jul 5 20:12:26 localhost kernel: ivtv: Tried to open YUV output device
but need to send data to mpeg decoder before it can be used
Jul 5 20:12:26 localhost kernel: ivtv: Encoder revision: 0x02050032
Jul 5 20:12:26 localhost kernel: ivtv: Encoder Firmware may be buggy,
use version 0x02040011
Jul 5 20:12:26 localhost kernel: ivtv: Configuring WinTV PVR 150 card
with 5 streams
Jul 5 20:12:26 localhost kernel: ivtv: Registered v4l2 device for
encoder MPEG minor 2
Jul 5 20:12:26 localhost kernel: ivtv: Create DMA encoder MPEG stream:
0 x 32768 buffers (0KB total)
Jul 5 20:12:26 localhost kernel: ivtv: Registered v4l2 device for
encoder YUV minor 34
Jul 5 20:12:26 localhost kernel: ivtv: Create DMA encoder YUV stream: 0
x 12960 buffers (0KB total)
Jul 5 20:12:26 localhost kernel: ivtv: Registered v4l2 device for
encoder VBI minor 226
Jul 5 20:12:26 localhost kernel: ivtv: Create DMA encoder VBI stream: 0
x 12740 buffers (0KB total)
Jul 5 20:12:26 localhost kernel: ivtv: Registered v4l2 device for
encoder PCM audio minor 26
Jul 5 20:12:26 localhost kernel: ivtv: Create DMA encoder PCM audio
stream: 0 x 4608 buffers (0KB total)
Jul 5 20:12:26 localhost kernel: ivtv: Registered v4l2 device for
encoder radio minor 66
Jul 5 20:12:26 localhost kernel: ivtv: Create encoder radio stream
Jul 5 20:12:26 localhost kernel: ivtv: Setting Tuner 56
Jul 5 20:12:26 localhost kernel: tuner: type set to 56 (Philips
PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #2
Jul 5 20:12:26 localhost kernel: ivtv: Switching standard to PAL.
Jul 5 20:12:26 localhost kernel: ivtv: Initialized WinTV PVR 150, card #2
Jul 5 20:12:26 localhost kernel: ivtv: ==================== END INIT
IVTV ====================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
