Hello
I added a PVR-500 to my working PVR-350 version 0.2.0 (rc3j). But the tuner
was not recognized.
I have read several post using 0.3.6 (u) with the same configuration works,
so I upgraded.
Myth works as before. But my first tuner (dd if=/dev/video1) of the PVR-500
does not work (I saw an earlier post claiming the same problem 2 weeks ago,
but no advice how to fix it).
/etc/modprobe.conf:
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-81-2 ivtv
options saa7127 i2c_enable=1,-1,-1
options cx25840 i2c_enable=-1,1,1
options ivtv ivtv_std=2 tda9887=0,0,0 ivtv_debug=1 tuner=38,56,56 (I tried
also tda9887=0)
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
lirc_i2c
Also I tried to only use the options saa7127 or the cx25840 (from the
README.cx25840).
I noticed the following:
# dmesg|egrep "cx25840|Initialized"
ivtv: Initialized WinTV PVR 350, card #0
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: client id: cx25840_i2c_id 0, skipped
ivtv: Initialized WinTV PVR 150, card #1 <- card #1
cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25843-23 found. Initializing... <---
Initialisation of cx25840 after card #1 is already initialised, is this OK
?
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok] <--- Is it only
attached for card #2 ???
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #2
cx25840: decoder disable output
cx25840: decoder set input (7)
cx25840: now setting Tuner input
cx25840: set audio input (0)
cx25840: decoder enable output
cx25840: decoder set norm PAL
cx25840: decoder set input (7)
Trying:
# ./cx25840ctl -d /dev/video1 -l
Opening /dev/video1
ioctl: IVTV_IOC_G_CX25840_SETTING failed
# ./cx25840ctl -d /dev/video2 -l
Opening /dev/video2
SLEEP=0 (0x0) "Do not power down"
DIGITAL_PWR_DN=0 (0x0) "Do not gate"
.........
Any ideas ?
Thanks for your help
Ruud
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (u) loading
ivtv: Linux version: 2.6.11.4-20a-default 586 REGPARM gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:05:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7805538
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74,
v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557,
Revision 0x00000001
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x40, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler
(G) no-thread mode
msp34xx: $Id$ compiled on: Jul 14 2005 20:16:46
ivtv: i2c attach [client=MSP3418W-B3,ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 16
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VBI minor 228
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 232
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 48
ivtv: Create DMA decoder YUV stream: 0 x 51840 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c
driver #0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 5430, itv = 0xe0fceca0
ivtv: ivtv_enc_vbi_thread: pid = 5431, itv = 0xe0fceca0
ivtv: ivtv_dec_thread: pid = 5432, itv = 0xe0fceca0
ivtv: ivtv_dec_vbi_thread: pid = 5433, itv = 0xe0fceca0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI interrupt 0000:06:08.0[A] -> GSI 5 (level, low) -> IRQ 5
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8201932
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74,
v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
saa7127: detecting saa7127 client on address 0x88
saa7127: saa7127 client id: saa7127_i2c_id 1, skipped
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651,
Revision 0x00000000
ivtv: Radio detected
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: client id: cx25840_i2c_id 0, skipped
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 65
ivtv: Create encoder radio stream
ivtv: Setting Tuner 56
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c
driver #1
ivtv: i2c client addr: 0x44 not found for command 1074029571!
ivtv: i2c client addr: 0x44 not found for command 1074029572!
ivtv: i2c client addr: 0x44 not found for command 1074029678!
ivtv: Switching standard to PAL.
ivtv: i2c client addr: 0x44 not found for command 1074029571!
ivtv: Initialized WinTV PVR 150, card #1
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 5515, itv = 0xe0ff1fb8
ivtv: ivtv_enc_vbi_thread: pid = 5516, itv = 0xe0ff1fb8
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI interrupt 0000:06:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 8201932
tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74,
v4l2 = 0x00400e17)
tveeprom: audio_processor = MSP3410D (type = 5)
ivtv: i2c attach [client=tveeprom[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005)
saa7127: detecting saa7127 client on address 0x88
saa7127: saa7127 client id: saa7127_i2c_id 2, skipped
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005)
cx25840: detecting cx25840 client on address 0x88
cx25840: cx25843-23 found. Initializing...
cx25840: requesting /lib/modules/HcwMakoA.ROM
cx25840: firmware loaded
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651,
Revision 0x00000000
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 2
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 34
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 226
ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 26
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 66
ivtv: Create encoder radio stream
ivtv: Setting Tuner 56
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c
driver #2
cx25840: decoder set norm PAL
cx25840: decoder set input (6)
cx25840: now setting Tuner input
cx25840: set audio input (0)
ivtv: Switching standard to PAL.
cx25840: decoder set norm PAL
ivtv: Initialized WinTV PVR 150, card #2
ivtv: ==================== END INIT IVTV ====================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
