On 7/20/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > On Wed, Jul 20, 2005 at 05:28:23PM +0200, Petter Gundersen wrote: > > Used to have the same problem here as well. If the loading of the > > tda9887 module doesn't help you (it made no difference for my setup), > > you can try using the patch I posted here: > > http://www.gossamer-threads.com/lists/ivtv/devel/22272 > Before applying this patch, I had sound initially on my pvr-500, but > lose it after a channel change. This happened on both tuners. > > After the patch I have obscure noises on /dev/video0 and perfect sound > on /dev/video1, so part of the problem is solved. > > Do you use any module options after applying this patch? >
No special options. This is for a pvr350 and a pvr500 (0.3.7): options saa7127 i2c_enable=1,-1,-1 options cx25840 i2c_enable=-1,1,1 options ivtv ivtv_std=2,2,2 ivtv_dynbuf=0 The first tuner on my pvr500 has always been a bit messed up, though. Up until 0.3.6u the sound sometimes disappeared on the first tuner after a reboot, http://www.gossamer-threads.com/lists/ivtv/devel/21485 (not sure if this still happens on 0.3.7). I occasionally also get a bad picture from this tuner after a reboot. Regards, Petter ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click _______________________________________________ ivtv-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ivtv-devel
