Miwer wrote: >(ok sourceforge ate my previous mail, so here it is again without the >dmesg output, I'll post it separately) > >So, I still can't get the radio on this card working, but I've tried >some debugging options and it seems that the tda9887 produces different >output each time I run the ivtv-radio tool, even though I use the same >parameters... wierd. > >The attached logs should be self explaining - just note that I stripped >the attempt logs for cx25840 entries in order to keep the size down. > >Maybe someone on this list can use this information and fix a solution - >I don't have enough knowledge of the inner workings of this particular card. >If anyone need more testing and info on this topic, just let me know :) > >/Miwer > > >
and the dmesg output as promised
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (c) loading ivtv: Linux version: 2.6.12-gentoo-r6 PENTIUM4 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 18 (level, low) -> IRQ 18 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990431 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000 ivtv: PAL tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe on adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 56 tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #0 cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to PAL. cx25840: decoder set norm PAL ivtv: ivtv_enc_thread: pid = 14733, itv = 0xd12295a0 ivtv: ivtv_enc_vbi_thread: pid = 14734, itv = 0xd12295a0 cx25840: decoder disable output cx25840: decoder enable output cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 19 (level, low) -> IRQ 19 tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990431 tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe on adapter ivtv i2c driver #1 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25843-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 56, Tuner formats 0x00400e17, Radio: yes, Model 0x00915651, Revision 0x00000000 ivtv: Radio detected ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware can be buggy, use version 0x02040011!!!! ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 1 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 33 ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 225 ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 25 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 65 ivtv: Create encoder radio stream ivtv: Setting Tuner 56 tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by ivtv i2c driver #1 cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to PAL. cx25840: decoder set norm PAL cx25840: decoder disable output cx25840: decoder enable output cx25840: decoder set norm PAL cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: ivtv_enc_thread: pid = 14806, itv = 0xd124c8ec ivtv: ivtv_enc_vbi_thread: pid = 14807, itv = 0xd124c8ec ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ====================
