Ok, I removed the alias lines and tried again.  here is what I get in dmesg

ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.6 (w) loading
ivtv: Linux version: 2.6.12-1.1390_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 250 card
ivtv: Found an iTVC16 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
ivtv: i2c attach [client=tveeprom,ok]
ivtv: Tuner Type 8, Tuner formats 0x00001000, Radio: yes, Model
0x00893496, Revision 0xc0384b10
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: i2c attach [client=(tuner unset),ok]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
ivtv: i2c attach [client=saa7115[50],ok]
ivtv: i2c attach [client=MSP3448W-A2,ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 250 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Setting Tuner 8
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 250, card #0
ivtv: Autodetected WinTV PVR 150 card
ivtv: Found an iTVC16 based chip
ivtv: ivtv_enc_thread: pid = 3105, itv = 0xe24a8320
ivtv: ivtv_enc_vbi_thread: pid = 3106, itv = 0xe24a8320
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3189 vendor: 0x1106
ivtv: i2c attach [client=tveeprom,ok]
ivtv: i2c attach [client=(tuner unset),ok]
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005)
ivtv: Tuner Type 0, Tuner formats 0x00001000, Radio: yes, Model
0x008d1659, Revision 0xc0384b10
ivtv: Radio detected
cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005)
cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005)
ivtv: i2c attach [client=cx25840[50],ok]
ivtv: i2c attach [client=wm8775[50],ok]
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Configuring WinTV PVR 150 card with 5 streams
ivtv: Registered v4l2 device for encoder MPEG minor 1
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 33
ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 225
ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 25
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 65
ivtv: Create encoder radio stream
ivtv: Setting Tuner 0
ivtv: Switching standard to NTSC.
ivtv: Initialized WinTV PVR 150, card #1
ivtv: ====================  END INIT IVTV  ====================
ivtv: ivtv_enc_thread: pid = 3192, itv = 0xe24cb8cc
ivtv: ivtv_enc_vbi_thread: pid = 3193, itv = 0xe24cb8cc

Any obvious problems with this??

Thanks,
Ryan

On 8/11/05, Adam Forsyth <[EMAIL PROTECTED]> wrote:
> These lines are only for old versions, not 0.3.x:
> 
> alias tveeprom tveeprom-ivtv
> alias tuner tuner-ivtv
> alias msp3400 msp3400-ivtv
> 
> Also, you should send your "dmesg | grep ivtv" to the list.
> 
> On 8/11/05, Ryan <[EMAIL PROTECTED]> wrote:
> > I've recently added a PVR150 to my current setup, and therefor need to
> > go to the 0.3.x release of IVTV.  Install is on a Fedora Core 4 box
> > running kernel 2.6.12-1.1390.  Both devices get created successfully,
> > but when I try to capture from both, the 250 gives me video with no
> > sound, and the 150 just gives me a black screen.  Here is what I
> > currently have in my modprobe.conf.
> >
> > alias char-major-81 videodev
> > alias char-major-81-0 ivtv
> > alias char-major-81-1 ivtv
> > alias tveeprom tveeprom-ivtv
> > alias tuner tuner-ivtv
> > alias msp3400 msp3400-ivtv
> >
> > Does anyone have a 250 and a 150 working, and if so, what does your
> > modprobe.conf look like?
> >
> > I'm fairly new to Linux, so if I need to provide more information, I can.
> >
> > Thanks,
> > Ryan
> >
> >
> > -------------------------------------------------------
> > SF.Net email is Sponsored by the Better Software Conference & EXPO
> > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> > Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> > _______________________________________________
> > ivtv-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/ivtv-devel
> >
> 
> 
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel

Reply via email to