I tried the PVR-250 on another PC running WinXP, the
card worked with no problems.
However when I put it back it will still not capture
(but will initialize and detect a signal with no
problems).
I followed the instructions in the Fedora MythTV setup
and I really have nothing else to try. I am not
getting any error messages to give me any clues.
Everything seems to be initializing fine, it is
capture that is not working!
I could only get 0.3.7 to work, 0.2.x will initialize
(after I manually enable bus mastering) but ivtvctr -I
will not detect a signal. With 0.3.7 I can initialize
and detect a signal but can not capture.
I had MythTV working with the same card two years ago
(on an other PC), I would really like to get it
working again!
Please help....
Vassilis
--- Vassilis <[EMAIL PROTECTED]> wrote:
> Problem still persists, I am running near the end of
> my rope and I do not know what else to do!
>
> I upgraded to 0.3.7 and I was able to lock to a
> signal
> (ivtvctl -I said so) so that definitively helped.
> However my capture is still zero bytes long. I also
> loaded different PVR-250 firmware versions. The log
> with the new version is bellow.
>
>
> ivtv: ==================== START INIT IVTV
> ====================
> ivtv: version 0.3.7 (k) loading
> ivtv: Linux version: 2.6.12-1.1447_FC4 686 REGPARM
> 4KSTACKS gcc-4.0
> ivtv: In case of problems please include the debug
> info
> ivtv: between the START INIT IVTV and END INIT IVTV
> lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 250 card (iTVC16 based)
> PCI: Assigned IRQ 11 for device 0000:00:0a.0
> tveeprom: Hauppauge: model = 32031, rev = B110,
> serial# = 6148272
> tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type
> =
> 2)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
> 0x00001000)
> tveeprom: audio processor = MSP3435 (type = a)
> tveeprom: decoder processor = SAA7115 (type = 13)
> ivtv: i2c attach to card #0 ok [client=tveeprom[50],
> addr=50]
> ivtv: i2c attach to card #0 ok [client=(tuner
> unset),
> addr=61]
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> ivtv: i2c attach to card #0 ok [client=saa7115[50],
> addr=21]
> msp34xx: ivtv version
> msp34xx: init: chip=MSP3435G-B6, has NICAM support,
> simple (D) mode, simpler (G) no-thread mode
> msp34xx: $Id$ compiled on: Sep 2 2005 05:49:19
> ivtv: i2c attach to card #0 ok [client=MSP3435G-B6,
> addr=40]
> ivtv: Encoder revision: 0x02040011
> ivtv: Create DMA encoder MPEG stream: 0 x 32768
> buffers (0KB total)
> ivtv: Create DMA encoder YUV stream: 0 x 10800
> buffers
> (0KB total)
> ivtv: Create DMA encoder VBI stream: 0 x 17472
> buffers
> (0KB total)
> ivtv: Create DMA encoder PCM audio stream: 0 x 4608
> buffers (0KB total)
> tuner 1-0061: type set to 2 (Philips NTSC
> (FI1236,FM1236 and compatibles))
> Shorewall:net2all:DROP:IN=eth0 OUT= MAC=
> SRC=24.162.41.34 DST=224.0.0.251 LEN=107 TOS=0x00
> PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353
> DPT=5353
> LEN=87
> ivtv: Initialized WinTV PVR 250, card #0
> ivtv: ==================== END INIT IVTV
> ====================
>
>
>
> --- Vassilis <[EMAIL PROTECTED]> wrote:
>
> > I tried all the inputs (0-8) with the same result,
> > bellow is the output of ivtvctl -n and ivtvctl -I.
> >
> > Thanks...
> >
> > [EMAIL PROTECTED] ~]# ivtvctl -n
> > ioctl: VIDIOC_ENUMINPUT
> > Input : 0
> > Name : Composite 0
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 1
> > Name : Composite 1
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 2
> > Name : Composite 2
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 3
> > Name : Composite 3
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 4
> > Name : Tuner 0
> > Type : 0x00000001
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x0000000000003000 ( NTSC )
> > Status : 0
> >
> > Input : 5
> > Name : Composite 4
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 6
> > Name : S-Video 0
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 7
> > Name : S-Video 1
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 8
> > Name : S-Video 2
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > Input : 9
> > Name : S-Video 3
> > Type : 0x00000002
> > Audioset: 0x00000003
> > Tuner : 0x00000000
> > Standard: 0x00000000007F3FFF ( PAL NTSC
> > SECAM
> > )
> > Status : 0
> >
> > [EMAIL PROTECTED] ~]# ivtvctl -I
> > check SAA7115 input signal
> > ioctl: VIDEO_STATUS = Bad
> >
> > SAA7115 reg[STATUS#1 - 0x1E] = 00
> > Color Standard (D0-D1): BW/No color
> > White peak loop (D2): Not activated
> > Gain value for act.lum. (min) (D3): Not limited
> > Gain value for act.lum. (max) (D4): Not limited
> > WIPA-mode slow-time constant (D5): Not activated
> > Horizontal frequency (D6): Locked
> > Field length (D7): Non-standard
> >
> > SAA7115 reg[STATUS#2 - 0x1F] = 00
> > Ready for capture (D0): No
> > Macrovision 7.01 (D1): No
> > MV Colorstripe burst (D2): No
> > MV Colorstripe burst type 3 (D3): No
> > Input signal timebase (D4): Non-stable (VCR)
> > Field frequency (D5): 50Hz
> > H & V loops (D6): Locked
> > Interlace (D7): Not detected
> > [EMAIL PROTECTED] ~]# ivtvctl -I
> > check SAA7115 input signal
>
=== message truncated ===
______________________________________________________
Click here to donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
