With newer versions of IVTV modifications to modprobe.conf aren't necessary. You should be able to take those out entirely and the IVTV should automatically detect the two tuners.
Chris Aries Aries wrote: > Hi, I just bought a new computer together with a pvr500mce. But I have a > hard time installing it. I followed the gentoo howto on the gentoo wiki > pages: > http://gentoo-wiki.com/HARDWARE_PVR_500_Setup > > I followed every step, but catting /dev/video0 to a file and playing it > gives me static noise without sound. I can't either change the channel using > ivtv-tune. Here is the message from dmesg: > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.4.2 (tagged release) loading > ivtv: Linux version: 2.6.16-rc1 SMP gcc-3.4 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: User specified WinTV PVR 150 card (detected cx23416 based chip) > ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> > IRQ > 58 > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 8201686 > tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) > (eeprom 0x > 74) > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, > type > 62) > tveeprom 2-0050: audio processor is CX25843 (idx 37) > tveeprom 2-0050: decoder processor is CX25843 (idx 30) > tveeprom 2-0050: has radio, has no IR remote > ivtv0: This is the first unit of a PVR500 > tuner 2-0060: TEA5767 detected. > tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] > tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes) > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > cx25840 2-0044: 0x0000 is not a valid video input! > tuner 2-0061: tuner type not set > tuner 2-0061: tuner type not set > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 > ivtv: ====================== NEXT CARD ====================== > ivtv1: Autodetected WinTV PVR 150 card (cx23416 based) > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> > IRQ > 66 > ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) > ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] > cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) > cx25840 3-0044: loaded v4l-cx25840.fw firmware (14264 bytes) > ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) > ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] > tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #1) > ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] > tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201686 > tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) > tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) > (eeprom 0x > 74) > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, > type > 62) > tveeprom 3-0050: audio processor is CX25843 (idx 37) > tveeprom 3-0050: decoder processor is CX25843 (idx 30) > tveeprom 3-0050: has radio, has no IR remote > ivtv1: This is the second unit of a PVR500 > ivtv1: Correcting tveeprom data: no radio present on second unit > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv1: Encoder revision: 0x02050032 > ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) > ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) > ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > cx25840 3-0044: 0x0000 is not a valid video input! > tuner 3-0061: tuner type not set > tuner 3-0061: tuner type not set > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 > ivtv: ==================== END INIT IVTV ==================== > > My module config for ivtv looks this: > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-61 lirc_i2c > options ivtv ivtv_std=2,2 cardtype=6 > > I need some help ... What can I do? > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
