I tried it, but no changes.
What troubles me is this warning/error I get on both tuners:
cx25840 3-0044: 0x0000 is not a valid video input!
My lsmod looks like this when ivtv is loaded:
Module Size Used by
tda9887 17936 0
wm8775 7756 0
cx25840 24144 0
tuner 52780 0
v4l2_common 10304 1 tuner
tveeprom 17040 0
ivtv 194004 0
firmware_class 10688 2 cx25840,ivtv
i2c_algo_bit 10184 1 ivtv
videodev 11072 1 ivtv
nvidia 4854384 12
i2c_nforce2 8640 0
i2c_core 19840 8
tda9887,wm8775,cx25840,tuner,tveeprom,ivtv,i2c_algo_bit,i2c_nforce2
Maybe that helps.
Maybe this helps too:
cat /usr/src/linux/.config | grep VIDEO
CONFIG_ACPI_VIDEO=y
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_SAA6588 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
CONFIG_VIDEO_AUDIO_DECODER=m
CONFIG_VIDEO_DECODER=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_SELECT=y
Another idea?
>From: Chris MacDonald <[EMAIL PROTECTED]>
>Reply-To: User discussion about IVTV <[email protected]>
>To: User discussion about IVTV <[email protected]>
>Subject: Re: [ivtv-users] Problem installing PVR500MCE
>Date: Wed, 01 Feb 2006 22:21:55 -0500
>
>With newer versions of IVTV modifications to modprobe.conf aren't
>necessary. You should be able to take those out entirely and the IVTV
>should automatically detect the two tuners.
>
>Chris
>
>Aries Aries wrote:
> > Hi, I just bought a new computer together with a pvr500mce. But I have a
> > hard time installing it. I followed the gentoo howto on the gentoo wiki
> > pages:
> > http://gentoo-wiki.com/HARDWARE_PVR_500_Setup
> >
> > I followed every step, but catting /dev/video0 to a file and playing it
> > gives me static noise without sound. I can't either change the channel
>using
> > ivtv-tune. Here is the message from dmesg:
> > ivtv: ==================== START INIT IVTV ====================
> > ivtv: version 0.4.2 (tagged release) loading
> > ivtv: Linux version: 2.6.16-rc1 SMP gcc-3.4
> > ivtv: In case of problems please include the debug info between
> > ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> > ivtv: any module options, when mailing the ivtv-users mailinglist.
> > ivtv0: User specified WinTV PVR 150 card (detected cx23416 based chip)
> > ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 (level,
>low) ->
> > IRQ
> > 58
> > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> > tveeprom 2-0050: Hauppauge model 23559, rev D591, serial# 8201686
> > tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
> > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> > (eeprom 0x
> > 74)
> > tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx
>101,
> > type
> > 62)
> > tveeprom 2-0050: audio processor is CX25843 (idx 37)
> > tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 2-0050: has radio, has no IR remote
> > ivtv0: This is the first unit of a PVR500
> > tuner 2-0060: TEA5767 detected.
> > tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
> > tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio)
> > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> > cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> > cx25840 2-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> > wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
> > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> > tda9887 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
> > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> > ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
> > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv0: Encoder revision: 0x02050032
> > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
>total)
> > ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB
>total)
> > ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB
>total)
> > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> > total)
> > ivtv0: Create encoder radio stream
> > cx25840 2-0044: 0x0000 is not a valid video input!
> > tuner 2-0061: tuner type not set
> > tuner 2-0061: tuner type not set
> > ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> > ivtv: ====================== NEXT CARD ======================
> > ivtv1: Autodetected WinTV PVR 150 card (cx23416 based)
> > ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 (level,
>low) ->
> > IRQ
> > 66
> > ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50]
> > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> > ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61]
> > cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
> > cx25840 3-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
> > ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44]
> > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
> > ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b]
> > tda9887 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
> > ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43]
> > tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201686
> > tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
> > tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> > (eeprom 0x
> > 74)
> > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx
>101,
> > type
> > 62)
> > tveeprom 3-0050: audio processor is CX25843 (idx 37)
> > tveeprom 3-0050: decoder processor is CX25843 (idx 30)
> > tveeprom 3-0050: has radio, has no IR remote
> > ivtv1: This is the second unit of a PVR500
> > ivtv1: Correcting tveeprom data: no radio present on second unit
> > ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> > ivtv1: Encoder revision: 0x02050032
> > ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
>total)
> > ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB
>total)
> > ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB
>total)
> > ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
> > total)
> > cx25840 3-0044: 0x0000 is not a valid video input!
> > tuner 3-0061: tuner type not set
> > tuner 3-0061: tuner type not set
> > ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> > ivtv: ==================== END INIT IVTV ====================
> >
> > My module config for ivtv looks this:
> > alias char-major-81 videodev
> > alias char-major-81-0 ivtv
> > alias char-major-81-1 ivtv
> > alias char-major-61 lirc_i2c
> > options ivtv ivtv_std=2,2 cardtype=6
> >
> > I need some help ... What can I do?
> >
> >
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
> >
>
>
>_______________________________________________
>ivtv-users mailing list
>[email protected]
>http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
