Massey, Craig wrote:
> Got lucky in FC 3 by following Jarod Wilsons guide, not so lucky with
> FC4 and the latest. FC3 and mythtv worked good for 9 months till bin
> files could no longer be excuteted in linux anymore so took oportunity
> to upgrade to FC4. Now I can not get the IVTV modules to load becase
> it looks like tevee is not loading. Tried commenting out the Tveeprom
> aliascmd along with trying the same alias for tuner but no luck.
> Below is the info required as far as my limited knowlege. If more
> info is require let me know how to get it and I will send. Also
> willing to send ssh info to remote login info to get me back up and
> running.
>
> Cheers,
> Craig
>
>
>
> Would rather battle linux then be assimulated by Windoz.
>
> Feb 9 19:50:59 mythtv kernel: Linux video capture interface: v1.00
> Feb 9 19:50:59 mythtv kernel: ivtv: no version for "struct_module"
> found: kernel tainted.
> Feb 9 19:50:59 mythtv kernel: ivtv: ==================== START INIT
> IVTV ====================
> Feb 9 19:50:59 mythtv kernel: ivtv: version 0.4.2 (tagged release)
> loading
> Feb 9 19:50:59 mythtv kernel: ivtv: Linux version: 2.6.15-1.1830_FC4
> SMP gcc-4.0
> Feb 9 19:50:59 mythtv kernel: ivtv: In case of problems please
> include the debug info between
> Feb 9 19:50:59 mythtv kernel: ivtv: the START INIT IVTV and END INIT
> IVTV lines, along with
> Feb 9 19:50:59 mythtv kernel: ivtv: any module options, when mailing
> the ivtv-users mailinglist.
> Feb 9 19:50:59 mythtv kernel: ivtv0: Autodetected WinTV PVR 250 card
> (cx23416 based)
> Feb 9 19:50:59 mythtv kernel: GSI 18 sharing vector 0xB9 and IRQ 18
> Feb 9 19:50:59 mythtv kernel: ACPI: PCI Interrupt 0000:02:08.0[A] ->
> GSI 20 (level, low) -> IRQ 185
> Feb 9 19:50:59 mythtv kernel: ivtv0: Unreasonably low latency timer,
> setting to 64 (was 32)
> Feb 9 19:50:59 mythtv kernel: ivtv0: Failed to load module tveeprom
> Feb 9 19:50:59 mythtv kernel: ivtv0 warning: i2c client addr: 0x50
> not found for command 0x0!
> Feb 9 19:50:59 mythtv kernel: ivtv0: Error -19 reading Hauppauge eeprom.
> Feb 9 19:50:59 mythtv kernel: ivtv0: Possible causes: the tveeprom
> module was not loaded, or
> Feb 9 19:50:59 mythtv kernel: ivtv0: the eeprom kernel module was
> loaded before the tveeprom module.
> Feb 9 19:50:59 mythtv kernel: ivtv0: Failed to load module tuner
> Feb 9 19:51:00 mythtv kernel: saa7115 0-0021: saa7115 found @ 0x42
> (ivtv i2c driver #0)
> Feb 9 19:51:00 mythtv kernel: ivtv0: i2c attach to card #0 ok
> [client=saa7115, addr=21]
> Feb 9 19:51:00 mythtv kernel: ivtv0: Failed to load module msp3400
> Feb 9 19:51:00 mythtv kernel: ivtv0: Failed to load module tda9887
> Feb 9 19:51:00 mythtv kernel: ivtv0: Could not detect tuner standard,
> defaulting to NTSC.
> Feb 9 19:51:00 mythtv kernel: ivtv0: loaded v4l-cx2341x-enc.fw
> firmware (262144 bytes)
> Feb 9 19:51:00 mythtv kernel: ivtv0: Encoder revision: 0x02050032
> Feb 9 19:51:00 mythtv kernel: ivtv0: Allocate DMA encoder MPEG
> stream: 128 x 32768 buffers (4096KB total)
> Feb 9 19:51:00 mythtv kernel: ivtv0: Allocate DMA encoder YUV stream:
> 194 x 10800 buffers (2048KB total)
> Feb 9 19:51:00 mythtv kernel: ivtv0: Allocate DMA encoder VBI stream:
> 120 x 17472 buffers (2048KB total)
> Feb 9 19:51:00 mythtv kernel: ivtv0: Allocate DMA encoder PCM audio
> stream: 455 x 4608 buffers (2048KB total)
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40086d11!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x00
> not found for command 0x40085618!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40085618!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x00
> not found for command 0x402c5639!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x402c5639!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x80287610!
> Feb 9 19:51:00 mythtv kernel: ivtv0 warning: i2c client addr: 0x40
> not found for command 0x40287611!
> Feb 9 19:51:00 mythtv kernel: ivtv0: Initialized WinTV PVR 250, card #0
> Feb 9 19:51:00 mythtv kernel: ivtv: ==================== END INIT
> IVTV ====================
> Feb 9 19:51:00 mythtv kernel: GSI 19 sharing vector 0xC1 and IRQ 19
>
>
>
> Modprobe.conf
> alias scsi_hostadapter sata_uli
> alias eth0 8139too
> alias snd-card-0 snd-intel8x0
> options snd-card-0 index=0
> options snd-intel8x0 index=0
> remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ;
> }; /sbin/modprobe -r --ignore-remove snd-intel8x0
> alias usb-controller ehci-hcd
> alias usb-controller1 ohci-hcd
> # nvidia kernel module
> alias char-major-195 nvidia-1_0-8178
> alias nvidia nvidia-1_0-8178
>
> # ivtv modules setup
> alias char-major-81 videodev
> alias char-major-81-0 ivtv
> #alias tveeprom tveeprom-ivtv
> alias msp3400 msp3400-ivtv
>
Try commenting out alias msp3400 msp3400-ivtv also.
>
>
> lspci -v
> 02:08.0 Multimedia video controller: Internext Compression Inc iTVC16
> (CX23416) MPEG-2 Encoder (rev 01)
> Subsystem: Hauppauge computer works Inc. WinTV PVR 250
> Flags: bus master, medium devsel, latency 64, IRQ 185
> Memory at f0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: [44] Power Management version 2
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
