John Snyder wrote: > New install of suse 10.0 OSS with PVR150 and ivtv version 0.4.3 on a > Compaq Deskpro EN. > > After a cold boot, the card works fine, but with a warm boot it's not > recognized properly. > lspci shows: > > (cold boot) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 > (warm boot) Subsystem: Hauppauge computer works Inc.: Unknown device 0003 > > ...after which ivtv detects a pvr 150 (cold boot) or pvr 250 (warm boot). > > Details are at: http://slushpump.pastebin.com/621582 > > I've seen a few posts with similar problems in the January, 2006 > archives, such as: > http://www.ivtvdriver.org/pipermail/ivtv-users/2006-January/001202.html > http://www.ivtvdriver.org/pipermail/ivtv-users/2006-January/001205.html > .....but I've not seen any solutions to those posts. > > I'm guessing that I can bypass the problem by always cold booting > (reboot=cold). > But I thought I'd document the problem and see if there's something that > I've missed. > > Thanks....JRS > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > I've also experienced the cold boot issue. I have yet to find a solution, I'm running 0.3.3k drivers on a hacked up 800mhz Compaq board with the PVR-150. I was going to try upgrading to the 0.6 series, but I figure if it ain't broke don't fix it.
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
