Try ivtv-0.4.4, it should be fixed there.
Hans
On Saturday 25 March 2006 17:08, Shawn wrote:
> John Snyder wrote:
> > New install of suse 10.0 OSS with PVR150 and ivtv version 0.4.3 on
> > a Compaq Deskpro EN.
> >
> > After a cold boot, the card works fine, but with a warm boot it's
> > not recognized properly.
> > lspci shows:
> >
> > (cold boot) Subsystem: Hauppauge computer works Inc. WinTV PVR
> > 150 (warm boot) Subsystem: Hauppauge computer works Inc.: Unknown
> > device 0003
> >
> > ...after which ivtv detects a pvr 150 (cold boot) or pvr 250 (warm
> > boot).
> >
> > Details are at: http://slushpump.pastebin.com/621582
> >
> > I've seen a few posts with similar problems in the January, 2006
> > archives, such as:
> >
> > http://www.ivtvdriver.org/pipermail/ivtv-users/2006-January/001202.
> >html
> > http://www.ivtvdriver.org/pipermail/ivtv-users/2006-January/001205.
> >html .....but I've not seen any solutions to those posts.
> >
> > I'm guessing that I can bypass the problem by always cold booting
> > (reboot=cold).
> > But I thought I'd document the problem and see if there's something
> > that I've missed.
> >
> > Thanks....JRS
> >
> > _______________________________________________
> > ivtv-users mailing list
> > [email protected]
> > http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
> I've also experienced the cold boot issue. I have yet to find a
> solution, I'm running 0.3.3k drivers on a hacked up 800mhz Compaq
> board with the PVR-150. I was going to try upgrading to the 0.6
> series, but I figure if it ain't broke don't fix it.
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
