On Friday 11 August 2006 07:23, Steve Reilly wrote:
> Hi all,
>
>
>
> wondering if anyone knows where on the web i can find a listing of
> tuners and there # codes for ivtv. i have been searching for
> literally 5 hours, and cannot find them anywhere. the only thing i
> found was something on ivtv site that listed some file in some
> directory, but i searched my entire file system for it, and its not
> there.
It's in the kernel, files include/media/tuner.h for the tuner numbers
and file drivers/media/video/tveeprom.c for the mapping between the
Hauppauge eeprom tuner ID and the tuner.h numbers.
>
> 2nd question.
>
>
> for this tuner model TCL M2523_5N_E (idx 112, type 4) what ivtv
> tuner code should i use besides 50? thats the one it is autodetected
> as, and it only shows snow on mplayer when i open /dev/video0/ i
> tried changing the channels with the usa frequencies to no avail.
> i cannot get yast to detect channels, because ivtv is using the wrong
> tuner module !!! (i think) maybe someone can enlighten me...... ive
> been searching the net, and googling for days. Thank you!
You need to specify the ivtv module option 'tuner=50' for the tuner to
work. Alternatively, upgrade to the 2.6.17 kernel and ivtv-0.7.0: that
combination will autodetect the correct tuner automatically.
Hans
>
>
> Linux linux-3l0w 2.6.16.13-4-smp #1 SMP Wed May 3 04:53:23 UTC 2006
> i686 athlon i386 GNU/Linux
>
>
> Suse 10.1
>
>
>
>
>
>
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.6.3 (tagged release) loading
> ivtv: Linux version: 2.6.16.13-4-smp SMP 586 REGPARM gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> usb 4-2: new device found, idVendor=0609, idProduct=031d
> usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb 4-2: Product: eHome Infrared Transceiver
> usb 4-2: Manufacturer: SMK
> usb 4-2: SerialNumber: SM0068oZ
> usb 4-2: configuration #1 chosen from 1 choice
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> ACPI Warning (pci_link-0407): PCI Interrupt Link [ALKD] BIOS reported
> IRQ 0, using IRQ 23 [20060127] ACPI: PCI Interrupt Link [ALKD]
> enabled at IRQ 23
> ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level,
> low) -> IRQ 201 PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
> eth0: VIA Rhine II at 0x1e000, 00:0e:a6:9d:4e:df, IRQ 201.
> eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link
> 45e1. agpgart: Detected VIA KM400/KM400A chipset
> agpgart: AGP aperture is 64M @ 0xd8000000
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 209
> PCI: Via IRQ fixup for 0000:00:0b.0, from 3 to 1
> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209]
> MMIO=[e2001000-e20017ff] Max Packet=[2048] IR/IT contexts=[4/8]
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 217
> usb 5-1: new full speed USB device using uhci_hcd and address 2
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ACPI
> Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0]
> 'on' [20060127] tveeprom 1-0050: Hauppauge model 26582, rev F0B2,
> serial# 9602174 tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx
> 112, type 4) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
> tveeprom 1-0050: audio processor is CX25843 (idx 37)
> tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> tveeprom 1-0050: has no radio, has no IR remote
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> usb 5-1: new device found, idVendor=058f, idProduct=9360
> usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3
> usb 5-1: Product: USB Reader
> usb 5-1: Manufacturer:
> usb 5-1: SerialNumber: 9205291
> usb 5-1: configuration #1 chosen from 1 choice
> cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> Initializing USB Mass Storage driver...
> scsi2 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> lirc_dev: module not supported by Novell, setting U taint flag.
> lirc_dev: IR Remote Control driver registered, at major 61
> lirc_mceusb2: module not supported by Novell, setting U taint flag.
>
> lirc_mceusb2: USB remote driver for LIRC v0.22
> lirc_mceusb2: Martin Blatter <[EMAIL PROTECTED]>
> cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800006b0f60]
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> usb 4-2: reset full speed USB device using uhci_hcd and address 2
> lirc_dev: lirc_register_plugin: sample_rate: 0
> lirc_mceusb2[2]: SMK eHome Infrared Transceiver on usb4:2
> usbcore: registered new driver lirc_mceusb2
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total) tuner 1-0061: tuner type not set
> tuner 1-0061: tuner type not set
> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
>
> Linux linux-3l0w 2.6.16.13-4-smp #1 SMP Wed May 3 04:53:23 UTC 2006
> i686 athlon i386 GNU/Linux
>
>
> using Suse 10.1
>
>
>
>
> Peace
>
>
>
>
>
>
> Steve Reilly
>
> ---------------------------------
> Get your email and more, right on the new Yahoo.com
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
