On Tuesday 05 September 2006 08:26, G. Jagadish wrote:
> Hi,
>
> I'm using FC3 with 2.6.12-1_1381 Kernel and PVR 150 card with IVTV
> 0.4.6Driver.
>
> I'm getting only video and no audio. pls help me in this,
>
> modprobe.conf
> ------------------------
> alias eth0 8139too
> alias scsi_hostadapter ata_piix
> alias snd-card-0 snd-intel8x0
> options snd-card-0 index=0
> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ;
> }; /sbin/modprobe -r --ignore-remove snd-intel8x0
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
> alias char-major-81 ivtv
> --------------------------
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.6 (tagged release) loading
> ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
> ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 10 (level,
> low) -> IRQ 10
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tveeprom: Hauppauge: model = 26139, rev = G1A5, serial# = 9533907
> tveeprom: tuner = <unknown> (idx = 105, type = -1069826176)
> tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
> tveeprom: audio_processor = MSP3400C (type = 4)
You are not using the tveeprom module that comes with ivtv. The tveeprom
from the 2.6.12 kernel doesn't know about the newer tuners, so no tuner
can be selected.
Hans
> ivtv0: Corrected autodetection from WinTV PVR 250 to WinTV PVR 150
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 1-0044: ivtv driver
> cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
> wm8775 1-001b: ivtv driver
> wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
> tda9885/6/7: chip found @ 0x86
> ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> ivtv0: Create encoder radio stream
> tuner 1-0061: tuner type not set
> ivtv0: Initialized WinTV PVR 150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> ------------------------------------------------------
>
> Thanx in Advance
> Jagadish
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
