My pvr-150 is now recognized and I can capture video/audio from the s-video port, despite misidentification of the card as a pvr-250 and the firmware loading errors in the log file (see below). The tuner appears to be recognized and set properly, but I can't tune with it; the channels aren't received properly, but I can see/hear enough to know that I am close.
I have verified that the cable is good by hooking it to a tv. I have tried the us-cable, us-cable-hrm, us-cable-irc and us-bcast frequency tables via ivtv-tune, but but still no luck. The system info: Fedora Core 5 Kernel 2.6.17-1, compiled from kernel org sources using a slightly modified FC5 config-2.6.17-1.2157_FC5 DFI Lanparty NFII Ultra B motherboard with an Athlon 2500+ processor Chipset nforce 2 Software -- All installed from source ivtv-0.7.0 Video-Frequencies-0.03 Video-ivtv-0.13 Config-IniFiles-2.39 Latest firmware files installed in /lib/firmware. Suggestions would be greatly appreciated. Thanks. Daniel kernel: ivtv: ==================== START INIT IVTV ==================== kernel: ivtv: version 0.7.0 (tagged release) loading kernel: ivtv: Linux version: 2.6.17.6-c1 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 kernel: ivtv: In case of problems please include the debug info between kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. kernel: ivtv0: Autodetected Hauppauge WinTV PVR-250 card (cx23415 based) kernel: ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 19 kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) kernel: saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) kernel: msp3400 2-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) kernel: msp3400 2-0040: MSP3435G-B6 supports radio, mode is autodetect and autoselect kernel: tveeprom 2-0050: Hauppauge model 48011, rev F310, serial# 5193118 kernel: tveeprom 2-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) kernel: tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) kernel: tveeprom 2-0050: audio processor is MSP3435 (idx 10) kernel: tveeprom 2-0050: has radio kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) firmware_helper[3109]: Loading of /lib/firmware/v4l-cx2341x-enc.fw for ivtv driver failed: No such file or directory firmware_helper[3112]: Loading of /lib/firmware/v4l-cx2341x-dec.fw for ivtv driver failed: No such file or directory kernel: ivtv0: Encoder revision: 0x02050032 kernel: ivtv0: Decoder revision: 0x02020023 kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) kernel: ivtv0: Create encoder radio stream kernel: tuner 2-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) kernel: ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 kernel: ivtv: ==================== END INIT IVTV ==================== -- Daniel Parish <[EMAIL PROTECTED]> _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
