Hi, I'm working on installing a PVR-150 on a gentoo box with kernel 2.6.20r8, ivtv version 0.10.1r1 and am having some problems.
It looks like I have it all setup correctly, the kernel is compiled with the correct options, ivtv-tune will show that it tunes the card but never says "Signal Detected." Using xawtv, all that I get is a black screen but it shows the options for Composite, Tuner, and S-Video. Hooking the input cable to a tv lets me get channels 2-13 with a Comcast basic cable connection. With the install, I believe I had v4linux 1 and 2 installed. I recompiled the kernel without v4linux 1 and still get no signal but the card is mapped to /dev/video1 which is /dev/v4l/video1. The card has full permissions for everyone for debugging. Below is the output of dmesg. Any help or suggestions would be appreciated, Thanks, Josh vtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.1 (tagged release) loading ivtv: Linux version: 2.6.20-gentoo-r8 SMP mod_unload K7 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 i2c_adapter i2c-1: adapter [ivtv i2c driver #0] registered wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: reopen i2c bus for IR-blaster support i2c_adapter i2c-1: adapter [ivtv i2c driver #0] unregistered i2c_adapter i2c-1: adapter [ivtv i2c driver #0] registered wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: Registered device video1 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
