El miércoles, 18 de abril de 2018, 8:38:43 (UTC+2), J. Kiszka  escribió:
> > El lunes, 16 de abril de 2018, 14:45:45 (UTC+2), J. Kiszka  escribió:
> >> On 2018-04-16 14:21, iallende wrote:
> >>> El viernes, 13 de abril de 2018, 9:14:46 (UTC+2), J. Kiszka  escribió:
> >>>> On 2018-04-12 15:15, iallende wrote:
> >>>>> It still does not work. I have the following:
> >>>>>
> >>>>> root@xilinx-zcu102-2017_4:~# modprobe jailhouse
> >>>>> [   20.762034] jailhouse: loading out-of-tree module taints kernel.
> >>>>> root@xilinx-zcu102-2017_4:~# cd /cells/
> >>>>> root@xilinx-zcu102-2017_4:/cells# jailhouse enable zynqmp-zcu102.cell 
> >>>>>
> >>>>> Initializing Jailhouse hypervisor v0.8 on CPU 2
> >>>>> Code location: 0x0000ffffc0200060
> >>>>> Page pool usage after early setup: mem 33/993, remap 64/131072
> >>>>> Initializing processors:
> >>>>>  CPU 2... OK
> >>>>>  CPU 0... OK
> >>>>>  CPU 3... OK
> >>>>>  CPU 1... OK
> >>>>> Adding virtual PCI device 00:00.0 to cell "ZynqMP-ZCU102"
> >>>>> Adding virtual PCI device 00:01.0 to cell "ZynqMP-ZCU102"
> >>>>> Page pool usage after late setup: mem 42/993, remap 69/131072
> >>>>> Activating hypervisor
> >>>>> [   29.825496] The Jailhouse is opening.
> >>>>> root@xilinx-zcu102-2017_4:/cells# 
> >>>>> root@xilinx-zcu102-2017_4:/cells# 
> >>>>> root@xilinx-zcu102-2017_4:/cells# jailhouse cell linux 
> >>>>> zynqmp-zcu102-linux-demo.cell Image -d inmate-zynqmp-zcu102.dtb -i 
> >>>>> rootfs.cpio -c "console=ttyPS0,115200"
> >>>>> [   65.192135] Read fail divider address: fd1a0060
> >>>>> [   65.198616] Read fail divider address: fd1a0060
> >>>>> [   65.205473] CPU2: shutdown
> >>>>> [   65.210069] psci: CPU2 killed.
> >>>>> [   65.248402] CPU3: shutdown
> >>>>> [   65.252999] psci: CPU3 killed.
> >>>>> Adding virtual PCI device 00:00.0 to cell "ZynqMP-linux-demo"
> >>>>> Shared memory connection established: "ZynqMP-linux-demo" <--> 
> >>>>> "ZynqMP-ZCU102"
> >>>>> Adding virtual PCI device 00:02.0 to cell "ZynqMP-linux-demo"
> >>>>> Created cell "ZynqMP-linux-demo"
> >>>>> Page pool usage after cell creation: mem 59/993, remap 69/131072
> >>>>> [   65.299294] Created Jailhouse cell "ZynqMP-linux-demo"
> >>>>> Cell "ZynqMP-linux-demo" can be loaded
> >>>>> Started cell "ZynqMP-linux-demo"
> >>>>> root@xilinx-zcu102-2017_4:/cells# jailhouse cell list 
> >>>>> ID      Name                    State           Assigned CPUs           
> >>>>> Failed CPUs             
> >>>>> 0       ZynqMP-ZCU102           running         0-1                     
> >>>>>                         
> >>>>> 1       ZynqMP-linux-demo       running         2-3  
> >>>>>
> >>>>> However, the UART does not show anything. I have tried with a different 
> >>>>> Linux image and the same problem. I generate the images with Petalinux. 
> >>>>>
> >>>>
> >>>> Try debugging the non-root boot by using the Jailhouse console for the
> >>>> cell (con-type=JAILHOUSE, cell flag JAILHOUSE_CELL_DEBUG_CONSOLE, see
> >>>> Documentation/debug-output.md). Check if the UART is detected by the
> >>>> guest. Maybe the kernel is not configured as needed.
> >>>>
> >>>> Jan
> >>>> -- 
> >>>> Siemens AG, Corporate Technology, CT RDA IOT SES-DE
> >>>> Corporate Competence Center Embedded Linux
> >>>
> >>> I have applied the patches for JAILHOUSE_DBCON  and I added 
> >>> JAILHOUSE_CELL_DEBUG_CONSOLE to zynqmp-zcu102-linux-demo.c. I load the 
> >>> cell like this:
> >>> jailhouse cell linux zynqmp-zcu102-linux-demo.cell Image -d 
> >>> inmate-zynqmp-zcu102.dtb -i rootfs.cpio -c "con-type=jailhouse"
> >>>
> >>> However, the booting does not appear. To see the debug output I have to 
> >>> do "cat /dev/jailhouse", no?
> >>>
> >>
> >> Rather "jailhouse console". If that only lists output of the hypervisor
> >> itself, the guest does not start up. You then have some other issue. Is
> >> there anything you modified, compared to upstream Jailhouse
> >> configurations? Try reducing that to zero first.
> >>
> >> I can look up the setup on our ZCU102 to give you exact references to a
> >> known-to-work setup. Definitely working was vanilla Jailhouse v0.8 (I
> >> tested that prior to the release). I've also attached a reference config
> >> for the Linux inmate kernel.
> >>
> >> I hope we can eventually handle such setup questions via the
> >> jailhouse-image project, but right now that's not yet there.
> >>
> >> Jan
> >>
> >> -- 
> >> Siemens AG, Corporate Technology, CT RDA IOT SES-DE
> >> Corporate Competence Center Embedded Linux
> > 
> > I did both images with Petalinux 2017.4 and its default bsp. The Kernel 
> > version is 4.9. How do you build your images? Yocto with meta-xilinx layer? 
> 
> No Yocto. Custom kernel config, mainline kernel, built via Linaro
> cross-toolchain, standard distro image. It's basically the manual form
> of https://github.com/siemens/jailhouse-images.
> 
> > 
> > I have tried running non-root cell with a new image built with Yocto and 
> > meta-xilinx and the same has happened. 
> > 
> > Sorry for such amount of doubts and not achieving it. Perhaps when if I 
> > achieve it I can create a document for the respository as there is for the 
> > Banana-pi and the Emtrion.
> > 
> 
> The board setup isn't trivial, and that's why I'm planning to encode the
> image building for reference boards (like the zcu102) into that
> Yocto-like recipes, like I started already for virtual ones. The build
> infrastructure isn't cross-friendly yet, thus the builds take too long,
> but that should be fixed rather soon. Then we can expand to real boards
> as well.
> 
> Jan
> 
> -- 
> Siemens AG, Corporate Technology, CT RDA IOT SES-DE
> Corporate Competence Center Embedded Linux

Hi,

Can you pass me the dts you use? I think it is the only different think I am 
using know. Besides, I have read again the README and I have seen this:

Appropriate boot loader support (typically U-Boot)

    Linux is started in HYP mode
    PSCI support for CPU offlining

It is necessary to enable any CONFIG_* in the U-Boot?

-- 
You received this message because you are subscribed to the Google Groups 
"Jailhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to jailhouse-dev+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to