On Mon, 31 Aug 2020 at 12:55, Jan Kiszka <jan.kis...@siemens.com> wrote:
> > Jakub, could you help with validating this? I don't have RPi4 variants > with 2 or 4 GB in reach ATM. > Verified with 2G, 4G and 8G board. Boots up, sees all the memory and runs the non-root Linux cell fine. But I had to update the rpi-firmware to the latest version (20200819). Without that, the boards were hanging up waiting for /dev/mmcblk0p2 with some errors earlier in the log (attached). By the way, for some reason the ivshmem-net is showing up as eth1 in the -next build and thus is not being configured automatically. Jakub -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to jailhouse-dev+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/CAGdCPwvhkChVGGkr-fe%3DQ4WYEr2f1tQ0%2BGSHDnKRpfWWsYSp1A%40mail.gmail.com.
NOTICE: BL31: v2.2(release): NOTICE: BL31: Built : 19:28:53, Aug 31 2020 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.4.59 (builder@b045fd5cd4c9) (gcc version 8.3.0 (Debian 8.3.0-2)) #1 SMP PREEMPT Mon Aug 31 19:31:26 UTC 2020 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 256 MiB at 0x0000000070000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 31 pages/cpu s87064 r8192 d31720 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 432306 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:49:D6:42 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x37400000-0x3b400000] (64MB) [ 0.000000] Memory: 1372904K/1756672K available (9212K kernel code, 1072K rwdata, 3204K rodata, 960K init, 1198K bss, 121624K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 30698 entries in 120 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000209] Console: colour dummy device 80x25 [ 0.000265] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000286] pid_max: default: 32768 minimum: 301 [ 0.000589] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000622] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001721] Disabling memory control group subsystem [ 0.024052] ASID allocator initialised with 32768 entries [ 0.032047] rcu: Hierarchical SRCU implementation. [ 0.040358] EFI services will not be available. [ 0.048108] smp: Bringing up secondary CPUs ... [ 0.080345] Detected PIPT I-cache on CPU1 [ 0.080400] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.112459] Detected PIPT I-cache on CPU2 [ 0.112504] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.144576] Detected PIPT I-cache on CPU3 [ 0.144618] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.144772] smp: Brought up 1 node, 4 CPUs [ 0.144810] SMP: Total of 4 processors activated. [ 0.144825] CPU features: detected: 32-bit EL0 Support [ 0.144839] CPU features: detected: CRC32 instructions [ 0.167162] CPU: All CPU(s) started at EL2 [ 0.167221] alternatives: patching kernel code [ 0.168400] devtmpfs: initialized [ 0.176349] Enabled cp15_barrier support [ 0.176384] Enabled setend support [ 0.176824] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.176853] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.183885] pinctrl core: initialized pinctrl subsystem [ 0.184546] DMI not present or invalid. [ 0.184948] NET: Registered protocol family 16 [ 0.190799] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.191246] cpuidle: using governor menu [ 0.191483] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.191716] Serial: AMBA PL011 UART driver [ 0.196256] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.204815] raspberrypi-firmware soc:firmware: Request 0x00000001 returned status 0x00000000 [ 0.208830] raspberrypi-firmware soc:firmware: Request 0x00000003 returned status 0x00000000 [ 0.212847] raspberrypi-firmware soc:firmware: Request 0x00030046 returned status 0x00000000 [ 0.248045] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.250971] vgaarb: loaded [ 0.251361] SCSI subsystem initialized [ 0.251557] usbcore: registered new interface driver usbfs [ 0.251607] usbcore: registered new interface driver hub [ 0.251723] usbcore: registered new device driver usb [ 0.252894] clocksource: Switched to clocksource arch_sys_counter [ 0.964153] VFS: Disk quotas dquot_6.6.0 [ 0.964253] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.964413] FS-Cache: Loaded [ 0.964615] CacheFiles: Loaded [ 0.965377] simple-framebuffer: probe of 0.framebuffer failed with error -12 [ 0.974944] thermal_sys: Registered thermal governor 'step_wise' [ 0.975255] NET: Registered protocol family 2 [ 0.975988] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.976050] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.976237] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.976579] TCP: Hash tables configured (established 16384 bind 16384) [ 0.976753] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.976835] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.977193] NET: Registered protocol family 1 [ 0.977962] RPC: Registered named UNIX socket transport module. [ 0.977978] RPC: Registered udp transport module. [ 0.977990] RPC: Registered tcp transport module. [ 0.978002] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.978023] PCI: CLS 0 bytes, default 64 [ 0.979765] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.981558] Initialise system trusted keyrings [ 0.981846] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.990269] FS-Cache: Netfs 'nfs' registered for caching [ 0.990941] NFS: Registering the id_resolver key type [ 0.990973] Key type id_resolver registered [ 0.990985] Key type id_legacy registered [ 0.991008] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.992163] Key type asymmetric registered [ 0.992179] Asymmetric key parser 'x509' registered [ 0.992222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.992468] io scheduler mq-deadline registered [ 0.992484] io scheduler kyber registered [ 0.994648] raspberrypi-firmware soc:firmware: Request 0x00048020 returned status 0x00000000 [ 0.994671] brcmvirt-gpio soc:virtgpio: Failed to set gpiovirtbuf, trying to get err:ffffffea [ 0.994729] raspberrypi-firmware soc:firmware: Request 0x00040010 returned status 0x00000000 [ 0.994745] brcmvirt-gpio soc:virtgpio: Failed to get gpiovirtbuf [ 0.994773] brcmvirt-gpio: probe of soc:virtgpio failed with error -22 [ 0.995140] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995160] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 0 config (-22 80) [ 0.995214] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995232] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 1 config (-22 81) [ 0.995284] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995301] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 2 config (-22 82) [ 0.995351] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995368] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 3 config (-22 83) [ 0.995417] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995434] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 4 config (-22 84) [ 0.995483] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995500] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 5 config (-22 85) [ 0.995549] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995566] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 6 config (-22 86) [ 0.995615] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 0.995632] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 7 config (-22 87) [ 0.996515] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.996582] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 0.996642] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0000000000 [ 1.044926] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (!SSC) [ 1.045225] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.045245] pci_bus 0000:00: root bus resource [bus 00-01] [ 1.045265] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 1.045318] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.045536] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.048342] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.048583] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.048721] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.049188] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.051936] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 1.051974] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.051997] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.052075] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.052097] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.052198] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.052256] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 1.052365] raspberrypi-firmware soc:firmware: Request 0x00030058 returned status 0x00000000 [ 1.054596] raspberrypi-firmware soc:firmware: Request 0x00030030 returned status 0x00000000 [ 1.055246] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.057893] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.058616] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.058973] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.069539] brd: module loaded [ 1.081000] loop: module loaded [ 1.081932] Loading iSCSI transport class v2.0-870. [ 1.083663] libphy: Fixed MDIO Bus: probed [ 1.084191] bcmgenet fd580000.genet: failed to get enet clock [ 1.084212] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 1.084233] bcmgenet fd580000.genet: failed to get enet-wol clock [ 1.084252] bcmgenet fd580000.genet: failed to get enet-eee clock [ 1.084278] bcmgenet: Skipping UMAC reset [ 1.092932] libphy: bcmgenet MII bus: probed [ 1.140998] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.141893] usbcore: registered new interface driver r8152 [ 1.141952] usbcore: registered new interface driver lan78xx [ 1.142012] usbcore: registered new interface driver smsc95xx [ 1.142567] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.142599] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.143354] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 1.144513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.144533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.144549] usb usb1: Product: xHCI Host Controller [ 1.144564] usb usb1: Manufacturer: Linux 5.4.59 xhci-hcd [ 1.144579] usb usb1: SerialNumber: 0000:01:00.0 [ 1.145178] hub 1-0:1.0: USB hub found [ 1.145269] hub 1-0:1.0: 1 port detected [ 1.145782] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.145813] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.145838] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.146269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.146287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.146302] usb usb2: Product: xHCI Host Controller [ 1.146316] usb usb2: Manufacturer: Linux 5.4.59 xhci-hcd [ 1.146331] usb usb2: SerialNumber: 0000:01:00.0 [ 1.146852] hub 2-0:1.0: USB hub found [ 1.146930] hub 2-0:1.0: 4 ports detected [ 1.148210] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.148984] usbcore: registered new interface driver uas [ 1.149077] usbcore: registered new interface driver usb-storage [ 1.149264] mousedev: PS/2 mouse device common for all mice [ 1.150542] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.151424] sdhci: Secure Digital Host Controller Interface driver [ 1.151437] sdhci: Copyright(c) Pierre Ossman [ 1.151922] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.152398] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.154074] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 1.154096] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 2 config (-22 82) [ 1.154172] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 1.154191] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 2 config (-22 82) [ 1.154302] leds-gpio: probe of leds failed with error -22 [ 1.154554] ledtrig-cpu: registered to indicate activity on CPUs [ 1.154635] hidraw: raw HID events driver (C) Jiri Kosina [ 1.154767] usbcore: registered new interface driver usbhid [ 1.154779] usbhid: USB HID core driver [ 1.155417] Initializing XFRM netlink socket [ 1.155452] NET: Registered protocol family 17 [ 1.155565] Key type dns_resolver registered [ 1.156028] registered taskstats version 1 [ 1.156051] Loading compiled-in X.509 certificates [ 1.159308] raspberrypi-firmware soc:firmware: Request 0x00030004 returned status 0x00000000 [ 1.164797] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.164928] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2 [ 1.165604] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 1.165627] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 6 config (-22 86) [ 1.165686] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 1.165704] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 6 config (-22 86) [ 1.165736] reg-fixed-voltage: probe of sd_vcc_reg failed with error -22 [ 1.166234] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 1.166253] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 4 config (-22 84) [ 1.166309] raspberrypi-firmware soc:firmware: Request 0x00030043 returned status 0x00000000 [ 1.166327] raspberrypi-exp-gpio soc:firmware:gpio: Failed to get GPIO 4 config (-22 84) [ 1.166355] gpio-regulator: probe of sd_io_1v8_reg failed with error -22 [ 1.168082] printk: console [ttyS0] disabled [ 1.168149] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 21, base_baud = 62500001) is a 16550 [ 2.636894] printk: console [ttyS0] enabled [ 2.642756] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.650901] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.657049] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.690818] of_cfs_init [ 2.693488] of_cfs_init: OK [ 2.697339] Waiting for root device /dev/mmcblk0p2... [ 2.707360] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.714591] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.721808] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.730324] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.737548] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.798471] random: fast init done [ 2.806788] mmc1: new high speed SDIO card at address 0001 [ 2.872934] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 3.027525] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 3.035860] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.043126] usb 1-1: Product: USB2.0 Hub [ 3.048581] hub 1-1:1.0: USB hub found [ 3.052624] hub 1-1:1.0: 4 ports detected
