Does this mean compiler issue 22 "Compiler cannot compare negative and
positive constants" was fixed iun 2.4i ?

http://code.google.com/p/jallib/issues/detail?id=22


Seb

2008/12/23 <[email protected]>

>
> Author: jsuijs
> Date: Tue Dec 23 01:10:19 2008
> New Revision: 640
>
> Modified:
>    trunk/unvalidated/include/peripheral/usart/serial_hardware.jal
>
> Log:
> added validation for max baudrate deviation
>
> Modified: trunk/unvalidated/include/peripheral/usart/serial_hardware.jal
>
> ==============================================================================
> --- trunk/unvalidated/include/peripheral/usart/serial_hardware.jal
> (original)
> +++ trunk/unvalidated/include/peripheral/usart/serial_hardware.jal      Tue
> Dec
> 23 01:10:19 2008
> @@ -67,13 +67,24 @@
>
>        -- if divider small enough,
>        -- calculate divider and set high-speed
> +      const real_baud = target_clock / 16 / (usart_div + 1)
>        if usart_div <= 255 then
> -           if usart_div >= 0 then
> +         if (real_baud > serial_hw_baudrate) then
> +            if (100 * (real_baud - serial_hw_baudrate) /
> serial_hw_baudrate >= max_deviation) then
> +               pragma error  -- asynchronous baudrate deviation is too
> large
> +            end if
> +         else
> +            if (100 * (serial_hw_baudrate - real_baud) /
> serial_hw_baudrate >= max_deviation) then
> +               pragma error  -- asynchronous baudrate deviation is too
> large
> +            end if
> +         end if
> +
> +         if usart_div >= 0 then
>              SPBRG = usart_div
>           else
>              SPBRG = 0
>           end if
> -           TXSTA_BRGH = true
> +         TXSTA_BRGH = true
>           -- try the low-speed mode
>        else
>             const usart_div_low = ((((10 * target_clock) / ( 64 *
> serial_hw_baudrate )) + 5 ) / 10) - 1
>
> >
>


-- 
Sébastien Lelong
http://www.sirloon.net
http://sirbot.org

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to