Does your Dec Access 32 show up in your JFW.ini file as one of the synsethizers?
-----Original Message----- From: jaws-users-list@googlegroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Arianna Calesso Sent: Saturday, March 03, 2007 9:39 AM To: jaws-users-list@googlegroups.com Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer I can use it, too, Matt. The problem is that I don't know how to get it to automatically load when JAWS comes up. I think some kind of load command needs to be put into a .ini file or something like that, but I can't seem to get an answer from anyone on the list about this. Arianna Calesso ----- Original Message ----- From: "Matt" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 7:33 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer I have DecTalk access 32 installed and I've used it as a default synth and its worked fine. I have the software version though, I'm not sure if a hardware version would do the same. Matt Shaw ----- Original Message ----- From: "Ricque" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 3:06 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Hi Arianna, I would have to check further, but as far as I know the Access 32 from G W Micro will not work with Jaws. If you do get it installed, the best you can do is this: 1. go into the Jaws default configuration manager and then synthesizer options. 2. if the Deck talk shows up there, then select it as your default, then close the dialogue, and save your settings when leaving the configuration manager. 3. re-boot the computer, and see what happens. If you need more assistance, let us know. HTH, Richard Justice www.blind-computing.com ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 12:22 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Yes, it is the one from GW Micro. Arianna ----- Original Message ----- From: "Ricque" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 12:14 PM Subject: [JAWS-Users] Re: DecTalk Access32 as default synthesizer Hi Arianna, I haven't been following this thread, but is this the software synth? Richard Justice ----- Original Message ----- From: "Arianna Calesso" <[EMAIL PROTECTED]> To: "j-list" <jaws-users-list@googlegroups.com> Sent: Friday, March 02, 2007 11:56 AM Subject: [JAWS-Users] DecTalk Access32 as default synthesizer I asked this question earlier in the week about using DecTalk Access32 as my default synth. David recommended that I look on the JAWS users site for setting up a default synth, but that didn't solve my problem. Dec Access32 needs to be loaded and I need to know how I set this up so that it will happen automatically when I start JAWS. I hope this is clear enough for someone to give me an answer. Do I need to put something in the .ini file or how do I get Dec Access32 to come up as the JAWS synth? Arianna Calesso --~--~---------~--~----~------------~-------~--~----~ Visit the JAWS Users List home page at: http://www.jaws-users.com Address for the list archives: http://www.mail-archive.com/jaws-users-list%40googlegroups.com/ In order to contact the management team simply fill out the following form found at: http://www.jaws-users.com/contact.php You received this message because you are subscribed to the Google Groups "JAWS Users List" group. To post to this group, send email to jaws-users-list@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/jaws-users-list?hl=en -~----------~----~----~----~------~----~------~--~---