That was excellent Bill, I didn't understand it much but sounded very imformative..grins think I'll keep it who knows, right??
----- Original Message ----- From: "Bill Gallik" <[EMAIL PROTECTED]> To: <jaws-users-list@googlegroups.com> Sent: Saturday, March 10, 2007 6:11 PM Subject: [JAWS-Users] Re: JAWS and two sound cards > > Sherry, > > I recommend you run all "other" sounds through the default sound card and > also set up an entry in the JFW.INI file to allow you to ask JAWS through > the secondary sound device. I will include the pertinent entries in my > JFW.INI file because I think that will be more clear than the abstract > explanation as how to do this: > > [Synthesizers] > Synth1Name=accentsa > Synth1LongName=Accent SA > Synth1Port=Com1:9600,n,8,1,x > Synth1Driver=accentsa > Synth2Name=eloq > Synth2LongName=Eloquence for JAWS > Synth2Driver=eloq > Synth3Name=eloqUSB > Synth3LongName=Eloquence via USB for JAWS > Synth3Driver=eloq > Synth3Port=USB Audio Device > > Note that the Synth#Driver=eloq entry for both the standard Eloquence and > via the secondary audio device are identical; this is because eloq is the > program that will run regardless of which device is in use. Also note > that > the Synth#Port for the entries deploying the secondary audio device is > utilized and should be the exact name identified from the "Audio" tab of > the > Control-Panel/Sounds&Multi_media. This will be identified from the > "Preferred Device" list and must match that list entry exactly. > > The "Synth#Longname=__________" can be anything you like, but it would be > helpful if it reflects the synthesizer and indicates that it may be the > primary or secondary audio device -- this entry is where the list of > synthesizers comes from when going into the JAWS > Languages/Change-Synthesizer menu. > > The "Synth#Name=______" entry is also quite open for whatever you like to > use, but remember that this value will be used in any JAWS shortcut that > will instruct JAWS which synthesizer to use. For example, the "Start JAWS > with Eloquence" item in the JAWS sub-menu calls for JAWS to run with the > "/seloq" switch in force. In other words, if you want to tell JAWS to run > with a specific synthsizer from launch you use the "/s" switch and the > value > of the "Synth#Name=" entry for that particular synthesizer. > > If you have any further questions please feel free to ask. > > HTH > ---------------- > Bill Gallik > E-Mail: [EMAIL PROTECTED] > * * * > - "People want the front of the bus, the back of the church and the center > of attention." > - unknown (although I wish this were my own) > > > > > --~--~---------~--~----~------------~-------~--~----~ Visit the JAWS Users List home page at: http://www.jaws-users.com Address for the list archives: http://www.mail-archive.com/jaws-users-list%40googlegroups.com/ In order to contact the management team simply fill out the following form found at: http://www.jaws-users.com/contact.php You received this message because you are subscribed to the Google Groups "JAWS Users List" group. To post to this group, send email to jaws-users-list@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/jaws-users-list?hl=en -~----------~----~----~----~------~----~------~--~---