Hello Jason, I'm using jaws 11 at work, the pc from which I'm replying now but use jaws 12 on two computers at home.
I'm not on the jaws list at my home address, but will forward the message and look again tonight, but as far as I can recall, you don't go into the settings centre, just try the following: Choose the jaws context menu with the long insert key together with j, Then choose options, Then press v for voices and Enter on or press V again for voice adjustment. Then you are, after a few seconds, supposed to be on the profile, which would currently probably be on eloquence. Press enter to get into the combo box and arrow through the profiles. If you don't have one set up yet for the specific realspeak voice you wish to use, go into, by enter, the real speak profile. Tab down to the further options, inter alia language where you want english, probably your default already, then, on a further tab choose, with the arrow keys, the relevant person, like e.g. Daniel. All the realspeak voices already installed on your computer should be listed under the voice person of the realspeak profile. Tab further down and change the settings accordingly and save the voice under e.g. realspeak Daniel, or whatever relevant. Decide whether you want it to become the default jaws voice on the prompt after saving, which I wouldn't recommend, as it's a bit less responsive than eloquence for other jobs than reading. Then save finally and when you in future use the on the fly command to switch among profiles, it will show up. I'll check tonighton jaws 12, but I'm fairly sure I've covered the necessary steps. Riana -----Original Message----- From: jaws-users-list-boun...@jaws-users.com [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of jason smith Sent: Monday, August 22, 2011 2:18 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] changing the Jaws voice in the say all command Hi Riana. Thanks for that. Like I said earlier. I had used the realspeak voices in the alternate say all command before. As I installed them from the second CD, that came with an earlier version of Jaws. I think it was Jaws 10 or 11? So I assumed, that they would still be available on my system to use with Jaws 12? I have redownloaded them again from the FS website. Like you suggested. Surely we don't have to keep reinstalling them with every subsequent version of Jaws? I am still having trouble, finding where to go? So as to select which voice I want to use? I have listened to the Jaws training book. On how to choose an alternate voice during say all. But the options and menus they discuss. Are not there. I have also looked under the settings area of the utilities menu. As suggested by another list member. But still with no luck. Do you or any other list members have any suggestions? As to what i may be doing wrong. Again, I am using Jaws 12 on an XP home machine. Thanks again Jason ----- Original Message ----- From: "Van Der Walt Riana" <rivanderw...@justice.gov.za> To: <jaws-users-list@jaws-users.com> Sent: Thursday, August 18, 2011 3:51 PM Subject: Re: [JAWS-Users] changing the Jaws voice in the say all command > Hello Jason, > > It may be that you still need to install the additional voices, which > you can download from the fs site. > > They don't install automatically upon installation of jaws. > > After that, you would have to create profiles for the voices you want to > use, before you'd be able to switch to them. > > Riana > > > -----Original Message----- > From: jaws-users-list-boun...@jaws-users.com > [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of jason smith > Sent: Thursday, August 18, 2011 6:56 AM > To: jaws-users-list@jaws-users.com > Subject: [JAWS-Users] changing the Jaws voice in the say all command > > Hi list. In the past. I made use of the option in Jaws. That lets you > specify one of the real speak voices. To be used in the say all command > in Jaws. Which then automatically switches back to eloquence for normal > navigation etc. However, I turned that feature off quite some time ago. > I now wish to turn it back on. I followed the steps for doing so. As > outlined in the Jaws training tutorial. However, I don't seem to be able > to get it to work again. I am using Jaws 12. Are the real speak voices, > no longer included as part of the Jaws installation? Is that where I am > going wrong? As I only have the one software CD for Jaws 12. That was > sent to me. > > Thanks Jason > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
