Greetings all,

I was tracking down a "no utilization graphs" issue of my own but I
seem to be having non-rrd related problems.

My interfaces seem to no-longer be polled.

Here is the Host config for one device (note the current last-polled
date and very short duration - this box has hundreds of ints):
---snip---
  2      ac-b109-1       B-120           155.34.1.1      SNMPv1 Set      SNMPv1 
Set 
         Standard (for Switches)         CCT Network Section     Show           
 (None
Set)             No Configuration Transfer               Local           Every 
5 Minutes        
2005-03-12 15:34:40      2005-03-12 15:45:04     2005-05-25 09:45:02    
00:00:01
---snip---

Yet here is an interface from that same device, set to poll "When
Poller Runs", that has a last polled date back in March:
---snip---
57       ac-b109-1 B-120         10BaseTX Port 9/2 Name FAXCOM                  
                        
10000000         10000000                577             50              CCT 
Network Section    
Cisco Interface                  No SLA                  Show    When Poller 
Runs       
2005-03-12 16:00:27      2005-03-12 16:00:27     2005-03-22 13:33:12
---snip---

Almost all (not all, however) of the interfaces show up the same...

Here is my jffnms crontab (I'm using the poller2 since I've got lots of ints):
---snip---
# crontab -lu jffnms | grep -ve '^#' | grep -ve '^$'
JFFNMS=/usr/local/jffnms/engine
PHP=/usr/local/bin/php
*/1  * * * *    cd $JFFNMS && $PHP -q consolidate.php >/dev/null 2>&1
*/30 * * * *    cd $JFFNMS && $PHP -q rrd_analizer.php >/dev/null 2>&1
02   4 * * *    cd $JFFNMS && $PHP -q tftp_get_host_config.php >/dev/null 2>&1
02   5 * * *    cd $JFFNMS && $PHP -q cleanup_raw_tables.php >/dev/null 2>&1
20   * * * *    cd $JFFNMS && sh tmpwatch.sh $JFFNMS >/dev/null 2>&1
THREADS=5
*/1  * * * *    cd $JFFNMS && $PHP -q poller2.php master $THREADS
>/dev/null 2>&1
*/30 * * * *    cd $JFFNMS && $PHP -q autodiscovery_interfaces.php
master $THREADS > /dev/null 2>&1
*/1 * * * *     cd $JFFNMS && $PHP -q poller_helper.php >/dev/null 2>&1
---snip--- 

Also, this is a patched upgrade from 8.1 to 8.2 but the patch and
related changes seemed to go smoothly... Also, I had commented out the
poller cronjob entries for a few months a while back but have since
uncommented them.

Thanks for any insight,
     ~Aaron


-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel and
communications. There is no equipment to buy and you can meet as often as
you want. Try it free.http://ads.osdn.com/?ad_idt02&alloc_id135&op=click
_______________________________________________
jffnms-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jffnms-users

Reply via email to