What happens if the keynote synthesizer is not hooked up at boot up?
At 11:58 AM 1/13/99 +1000, you wrote:
>HI There,
>The file you are after is attached to this message.
>Regards, David.
>
>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]On Behalf Of Carlos A. Sanchez,
>> Jr.
>> Sent: Wednesday, 13 January 1999 8:59
>> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
>> Subject: Re: Jaws for dos and support for the keynote synths.
>>
>>
>> David, if what you are talking about is correct, I know what you
>> are talking
>> about. I use to have this file in a diskette but I can't seem to find it.
>> When you boot it use to say something like keynote gold version 1.25 or
>> something. Anyway, the golddev.sys file I am unable to find it
>> from the web
>> sight you specified. I have been there before, like over the summer but I
>> can't seem to find it. I looked everywhere I could. Please, if you could
>> send me the link for that file> I would like to install jaws for
>> dos on my
>> computer. I do not have my old copy of master touch any more and
>> this is my
>> only way to get speech going in dos mode. Thanks in advance.
>>
>> Carlos
>>
>>
>> -----Original Message-----
>> From: David Truong <[EMAIL PROTECTED]>
>> To: JFW Mailing list <[EMAIL PROTECTED]>
>> Date: Wednesday, January 06, 1999 8:15 AM
>> Subject: Jaws for dos and support for the keynote synths.
>>
>>
>> >Hi There,
>> >Jaws for dos does not support the keynote synthesisers directly
>> however as
>> already mentioned on this list you can tell jaws to install the accent
>> synthesiser and with the help of Pulse Data's accent emulation driver for
>> the keynote synths, the keynote can be supported. But to allow this
>> emulation to take place you must get the accent emulation driver
>> (GOLDDEV.SYS) from either the Pulse data's home page:
>> >http://www.pulsedata.co.nz
>> >or from the Humanware home page:
>> >http://www.humanware.com
>> >When you have obtained these drivers, put them or extract them into a
>> directory of your choice and to install it put the following
>> lines into your
>> config.sys file:
>> >[common]
>> >device=drive:\directory\golddev.sys
>> >with drive being your drive where your directory resides and directory
>> being the directory where you put the golddev.sys file. E.G. I extracted
>> the drivers into a directory called golddev and it is on my c: drive.
>> >[common]
>> >device=c:\golddev\golddev.sys
>> >Once you have installed the golddev driver then you should hear your
>> keynote synth say "goldcard version xxx loaded" or something like
>> that. If
>> you have successfully installed the golddev.sys driver then you
>> can emulate
>> an accent synth via your keynote.
>> >
>> >When you run the jaws for dos (JFD) installation program and it
>> comes up to
>> choosing the syth to install jfd for, select the accent pc and ignore the
>> message when it asks you to insert the floppy disk with the accent drivers
>> on it. Of course if you want to run jfd with win98 or win95 etc, then say
>> no to modifying the autoexec.bat and config.sys files.
>> >I hope this helps some what and any probs then email me privately.
>> >David.
>> >
>> >E-mail: [EMAIL PROTECTED]
>> >ICQ number: 22421731
>> >Home page: http://www.powerup.com.au/~dtruong
>> >Queensland Blind Cricket Association: http://www.st.net.au/~qbca
>> >Q.B.C.A. Blind cricket world cup web page:
>> http://www.st.net.au/~qbca/worldcup.htm
>> >Latest news and scores from the blind cricket world cup:
>> http://www.cricket.org/link_to_database/ARCHIVE/1998-99/OTHERS+ICC
>/WC-BLIND/
>>
>>-
>>To unsubscribe, see the home page
>>http://yoyo.cc.monash.edu.au/~nallan/jfw
>>
>
>-
>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>
>Attachment Converted: "c:\eudora\attach\GOLDDEV.SYS"
>
Thomas Stivers
-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
