I just want to say on this topic: 1. The scripts from the List site are
certainly better then even the latest Henter-Joyce scripts. 2. For example,
with the HJ scripts I could not read a full long e-mail with the space bar.
Also, 3. Many other strange things turned sour on my computer.
HJ really must get its act together on this one.
Richard Hutcheson
[EMAIL PROTECTED]
----- Original Message -----
From: Beth Hatch-Alleyne <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, April 03, 1999 12:47 PM
Subject: Re: IE 5.0 scripts
> Hi, I don't know the answer to the configuration problem with JFW, but
> perhaps I can help with the connection to your modem problem. Go to
> view/internet options. Press control-tab until you hear connection. The
> tabs here will allow you to choose whether IE dials your specified dial-up
> network connection. If you have more questions, or if you don't have a
> dial-up networking connection, please e-mail me privately at the address
at
> the bottom of this message.
>
> =Beth=
> =Beth Hatch-Alleyne=
> Justice Means Not Just Us.
> E-mail: [EMAIL PROTECTED]
> -----Original Message-----
> From: patpound <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Friday, April 02, 1999 8:16 PM
> Subject: IE 5.0 scripts
>
>
> >I have just downloaded and installed IE 5.0 and the new scripts (today's
> >revision). However when I start IE the config files does not load. Thus
I
> >cannot get the insturctions as I did for 4/01 to set the settings so it
> >works with JFW.
> >
> >Also, I could not find the setting to change so that IE automatically
dials
> >my modem. Is this a problem with JFW not reading everything?
> >
> >Thanks.
> >
> >Pat Pound
> >[EMAIL PROTECTED]
> >
> >
> >-----Original Message-----
> >From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> >Date: Thursday, April 01, 1999 7:17 PM
> >Subject: Welcome to jfw-digest
> >
> >
> >>--
> >>
> >>Welcome to the jfw-digest mailing list!
> >>
> >>Please save this message for future reference. Thank you.
> >>
> >>If you ever want to remove yourself from this mailing list,
> >>you can send mail to <[EMAIL PROTECTED]> with the
following
> >>command in the body of your email message:
> >>
> >> unsubscribe jfw-digest "patpound" <[EMAIL PROTECTED]>
> >>
> >> Here's the general information for the list you've subscribed to,
> >> in case you don't already have it:
> >>
> >>[Last updated on: Thu Jan 28 20:54:43 1999]
> >>The Jaws for windows mailing list has been created to provide a place
> >>where users can discuss any aspect of the program.
> >>
> >>This can include:
> >> Using JFW with specific programs.
> >> script Language (Writing, debugging, sharing etc...)
> >> and Anything else you can think of to do with JFW.
> >>
> >>Henter Joyce does not run the jfw mailing list, it is run on a Monash
> >>University computer in Melbourne Australia. It is run by a user of JFW
> >>who has no connection to Henter Joyce other than being a user of their
> >>product.
> >>
> >>To send mail to the list, use the email address
[EMAIL PROTECTED]
> >>
> >>Please note, before sending email to the jfw list, check to make sure
that
> >>your email program is set up to send messages in plain text format.
> >>
> >>Below are instructions for outlook 98, outlook express and eudora pro.
> >>
> >>Outlook 98
> >>
> >> 1. Start outlook 98.
> >>2. Alt+t, activates the tools menu.
> >>3. Letter o, activates the options multipage dialog box.
> >>4. press ctrl+tab twice.
> >>5. You should now be on a field that says "Send in this message
format".
> >Use the up and down arrows to change this to "Plain text".
> >>6. press shift+tab to get to the apply button, press it. shift+tab
twice
> >more to get to the OK button and press it.
> >>
> >>outlook express
> >>
> >> 1. Start outlook express.
> >>2. Alt+t, activates the tools menu.
> >>3. Letter o, activates the options multipage dialog box.
> >>4. Control+tab once, you will be on the mail sending tab.
> >>5. On this tab the first item is a group of two radio buttons labeled as
> >>mail sending format. One is plain text, the other is html. You want to
> >>make sure the plain text button is checked.
> >>
> >>6. Use the tab key to move to "Reply to messages using the format in
> which
> >they
> >>were sent" item, Make sure that this is unchecked.
> >>
> >>7. Move to the apply button and press enter, then move to ok and press
> >enter.
> >>
> >>Eudora pro
> >>Note, this is not for eudora lite.
> >>
> >>1. Start Eudora
> >>2. go to the tools menu by pressing alt-t
> >>3. then options by pressing o
> >>4. You are now on a list of categories, move up or down until you find
> >"Styled Text"
> >>5. Tab twice, you should now be on a set of radio buttons.
> >>6. Use the up and down arrows to change the selection to "send plain
text
> >only"
> >>7. press tab again, you should be on "ask me each time", make sure this
> is
> >unchecked.
> >>8. tab to the ok button and press enter.
> >>
> >>WWW page
> >>The JFW mailing list has a web site at
> >>http://yoyo.cc.monash.edu.au/~nallan/jfw
> >>Here you will find any scripts and JFW patches that are mentioned on the
> >>mailing list.
> >>
> >>
> >>The jfw mailing list Guidelines
> >>Post frequency: Every two weeks
> >>last updated on: 28 January 1999
> >>
> >>The guidelines are simple and shouldn't cause anyone to complain too
much.
> >>if you want to comment about any aspect of the guidelines, send them to
> >>[EMAIL PROTECTED], not to the list.
> >>
> >>0. Message format
> >>All messages posted to the jfw mailing list must be sent using plain
text
> >>format. You may have to configure your email program to do this.
> >>Instructions for various email programs are available on the faq section
> of
> >>the web page.
> >>
> >>1. Stay on topic. The topic for the jfw list is Jaws For windows, Jaws
> >>for Windows NT and jaws for dos.
> >>It has been noticed that some people insist on posting messages that
they
> >>know are off topic, that they state in the message are off topic, but
then
> >>go ahead and post it anyway.
> >>Simply asking for replies to be sent privately doesn't make it ok.
> >>
> >>This doesn't mean that you can not ask questions about how well jfw
works
> >>with a particular application. As long as you are asking about jfw's
> >>interaction with that program.
> >>Remember, the list is here for help with jfw, not help on how to use
> >>another application.
> >>
> >>2. subject lines,
> >>subject lines should be clear and identify what the
> >>contents of the message is about. If the contents of the message
change,
> >>the subject line should also change.
> >>Those of you that subscribe to the digest should take note of this, it
has
> >>been noticed that some of you leave the subject line the same as the
> >digests.
> >>
> >>Besides making subjects relevant to message content, put the most
> important
> >>part at the beginning of the subject. Remember that some (awful)
mailers
> >>show as few as 20 characters of the subject, so those 20 characters
should
> >>give the meat of the idea.
> >>
> >>3. Quoting replies part 1.
> >>When replying to a message you should trim the original message down as
> >>much as possible without losing enough information to allow other list
> >>members to understand what's happening.
> >>I've had a few people ask about this guideline. The reason is more
about
> >>taking load off the listserver. The smaller the message, the faster the
> >>listserver will process it.
> >>
> >>4. Quoting replies part 2
> >>When replying to messages, place your response at the top of the
message.
> >>I know in some cases its easier to mix your responses in with the
original
> >>message. In those cases, indicate that this is what you are doing.
> >>
> >>5. Virus warning messages
> >>Do not, I repeat do not post virus warnings to the jfw list. 99.9
percent
> >of
> >>the time they are a waist of every ones time and, it is off topic.
People
> >can
> >>go somewhere else to look for virus information.
> >>
> >>6. thank you, me too, holiday greetings and test messages.
> >>I think we all know that everyone appreciates the help provided by users
> on
> >>the jfw list. A message that simply contains a "thank you" to members
of
> >>the list, although sent with the best of intentions, just increases the
> >number
> >>of messages members must filter through. If you want to thank people,
> send
> >>them private email.
> >>the same goes for those very annoying messages that just say "me too"
when
> >>agreeing with another member. You might think that sending an agreement
> >>message should be ok, but when 500 people all do it, it gets a bit much.
> >>Holiday greetings can also be an annoyance when 500 people all do it.
If
> >you
> >>are going to send a holiday greeting, it is likely that many others will
> do
> >>the same.
> >>Finally, do not send or reply to any message that is a test. I and most
> >>other people find these messages very annoying and replies just make it
> >>worse.
> >>
> >>7. the list owner
> >>This probably isn't a rule, but I thought I'd throw it in here to make
> sure
> >>people understand.
> >>The list owner, that's me, has the right to unsubscribe anyone from the
> >list
> >>In the following circumstances.
> >>1. If the person is being annoying.
> >>2. If mail bounces back from the persons email address
> >>
> >>
> >>
> >>Contacting the list owner
> >>You can contact the list owner via email at
> >>[EMAIL PROTECTED], please allow 24 hours for a reply.
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
>
> -
> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
