Who wrote the IE5 scripts? Whoever it was should apply to hj for a job
writing their scripts. I am sure they would get a lot of good references
from the list. I am not using IE5 yet, but I sure can vouch for the IE4.1
scripts, they are working fine.
At 03:05 AM 4/4/99 -0500, you wrote:
>I just want to say on this topic: 1. The scripts from the List site are
>certainly better then even the latest Henter-Joyce scripts. 2. For example,
>with the HJ scripts I could not read a full long e-mail with the space bar.
>Also, 3. Many other strange things turned sour on my computer.
>HJ really must get its act together on this one.
>
>Richard Hutcheson
>[EMAIL PROTECTED]
>
>----- Original Message -----
>From: Beth Hatch-Alleyne <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Saturday, April 03, 1999 12:47 PM
>Subject: Re: IE 5.0 scripts
>
>
>> Hi, I don't know the answer to the configuration problem with JFW, but
>> perhaps I can help with the connection to your modem problem. Go to
>> view/internet options. Press control-tab until you hear connection. The
>> tabs here will allow you to choose whether IE dials your specified dial-up
>> network connection. If you have more questions, or if you don't have a
>> dial-up networking connection, please e-mail me privately at the address
>at
>> the bottom of this message.
>>
>> =Beth=
>> =Beth Hatch-Alleyne=
>> Justice Means Not Just Us.
>> E-mail: [EMAIL PROTECTED]
>> -----Original Message-----
>> From: patpound <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Friday, April 02, 1999 8:16 PM
>> Subject: IE 5.0 scripts
>>
>>
>> >I have just downloaded and installed IE 5.0 and the new scripts (today's
>> >revision). However when I start IE the config files does not load. Thus
>I
>> >cannot get the insturctions as I did for 4/01 to set the settings so it
>> >works with JFW.
>> >
>> >Also, I could not find the setting to change so that IE automatically
>dials
>> >my modem. Is this a problem with JFW not reading everything?
>> >
>> >Thanks.
>> >
>> >Pat Pound
>> >[EMAIL PROTECTED]
>> >
>> >
>> >-----Original Message-----
>> >From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> >Date: Thursday, April 01, 1999 7:17 PM
>> >Subject: Welcome to jfw-digest
>> >
>> >
>> >>--
>> >>
>> >>Welcome to the jfw-digest mailing list!
>> >>
>> >>Please save this message for future reference. Thank you.
>> >>
>> >>If you ever want to remove yourself from this mailing list,
>> >>you can send mail to <[EMAIL PROTECTED]> with the
>following
>> >>command in the body of your email message:
>> >>
>> >> unsubscribe jfw-digest "patpound" <[EMAIL PROTECTED]>
>> >>
>> >> Here's the general information for the list you've subscribed to,
>> >> in case you don't already have it:
>> >>
>> >>[Last updated on: Thu Jan 28 20:54:43 1999]
>> >>The Jaws for windows mailing list has been created to provide a place
>> >>where users can discuss any aspect of the program.
>> >>
>> >>This can include:
>> >> Using JFW with specific programs.
>> >> script Language (Writing, debugging, sharing etc...)
>> >> and Anything else you can think of to do with JFW.
>> >>
>> >>Henter Joyce does not run the jfw mailing list, it is run on a Monash
>> >>University computer in Melbourne Australia. It is run by a user of JFW
>> >>who has no connection to Henter Joyce other than being a user of their
>> >>product.
>> >>
>> >>To send mail to the list, use the email address
>[EMAIL PROTECTED]
>> >>
>> >>Please note, before sending email to the jfw list, check to make sure
>that
>> >>your email program is set up to send messages in plain text format.
>> >>
>> >>Below are instructions for outlook 98, outlook express and eudora pro.
>> >>
>> >>Outlook 98
>> >>
>> >> 1. Start outlook 98.
>> >>2. Alt+t, activates the tools menu.
>> >>3. Letter o, activates the options multipage dialog box.
>> >>4. press ctrl+tab twice.
>> >>5. You should now be on a field that says "Send in this message
>format".
>> >Use the up and down arrows to change this to "Plain text".
>> >>6. press shift+tab to get to the apply button, press it. shift+tab
>twice
>> >more to get to the OK button and press it.
>> >>
>> >>outlook express
>> >>
>> >> 1. Start outlook express.
>> >>2. Alt+t, activates the tools menu.
>> >>3. Letter o, activates the options multipage dialog box.
>> >>4. Control+tab once, you will be on the mail sending tab.
>> >>5. On this tab the first item is a group of two radio buttons labeled as
>> >>mail sending format. One is plain text, the other is html. You want to
>> >>make sure the plain text button is checked.
>> >>
>> >>6. Use the tab key to move to "Reply to messages using the format in
>> which
>> >they
>> >>were sent" item, Make sure that this is unchecked.
>> >>
>> >>7. Move to the apply button and press enter, then move to ok and press
>> >enter.
>> >>
>> >>Eudora pro
>> >>Note, this is not for eudora lite.
>> >>
>> >>1. Start Eudora
>> >>2. go to the tools menu by pressing alt-t
>> >>3. then options by pressing o
>> >>4. You are now on a list of categories, move up or down until you find
>> >"Styled Text"
>> >>5. Tab twice, you should now be on a set of radio buttons.
>> >>6. Use the up and down arrows to change the selection to "send plain
>text
>> >only"
>> >>7. press tab again, you should be on "ask me each time", make sure this
>> is
>> >unchecked.
>> >>8. tab to the ok button and press enter.
>> >>
>> >>WWW page
>> >>The JFW mailing list has a web site at
>> >>http://yoyo.cc.monash.edu.au/~nallan/jfw
>> >>Here you will find any scripts and JFW patches that are mentioned on the
>> >>mailing list.
>> >>
>> >>
>> >>The jfw mailing list Guidelines
>> >>Post frequency: Every two weeks
>> >>last updated on: 28 January 1999
>> >>
>> >>The guidelines are simple and shouldn't cause anyone to complain too
>much.
>> >>if you want to comment about any aspect of the guidelines, send them to
>> >>[EMAIL PROTECTED], not to the list.
>> >>
>> >>0. Message format
>> >>All messages posted to the jfw mailing list must be sent using plain
>text
>> >>format. You may have to configure your email program to do this.
>> >>Instructions for various email programs are available on the faq section
>> of
>> >>the web page.
>> >>
>> >>1. Stay on topic. The topic for the jfw list is Jaws For windows, Jaws
>> >>for Windows NT and jaws for dos.
>> >>It has been noticed that some people insist on posting messages that
>they
>> >>know are off topic, that they state in the message are off topic, but
>then
>> >>go ahead and post it anyway.
>> >>Simply asking for replies to be sent privately doesn't make it ok.
>> >>
>> >>This doesn't mean that you can not ask questions about how well jfw
>works
>> >>with a particular application. As long as you are asking about jfw's
>> >>interaction with that program.
>> >>Remember, the list is here for help with jfw, not help on how to use
>> >>another application.
>> >>
>> >>2. subject lines,
>> >>subject lines should be clear and identify what the
>> >>contents of the message is about. If the contents of the message
>change,
>> >>the subject line should also change.
>> >>Those of you that subscribe to the digest should take note of this, it
>has
>> >>been noticed that some of you leave the subject line the same as the
>> >digests.
>> >>
>> >>Besides making subjects relevant to message content, put the most
>> important
>> >>part at the beginning of the subject. Remember that some (awful)
>mailers
>> >>show as few as 20 characters of the subject, so those 20 characters
>should
>> >>give the meat of the idea.
>> >>
>> >>3. Quoting replies part 1.
>> >>When replying to a message you should trim the original message down as
>> >>much as possible without losing enough information to allow other list
>> >>members to understand what's happening.
>> >>I've had a few people ask about this guideline. The reason is more
>about
>> >>taking load off the listserver. The smaller the message, the faster the
>> >>listserver will process it.
>> >>
>> >>4. Quoting replies part 2
>> >>When replying to messages, place your response at the top of the
>message.
>> >>I know in some cases its easier to mix your responses in with the
>original
>> >>message. In those cases, indicate that this is what you are doing.
>> >>
>> >>5. Virus warning messages
>> >>Do not, I repeat do not post virus warnings to the jfw list. 99.9
>percent
>> >of
>> >>the time they are a waist of every ones time and, it is off topic.
>People
>> >can
>> >>go somewhere else to look for virus information.
>> >>
>> >>6. thank you, me too, holiday greetings and test messages.
>> >>I think we all know that everyone appreciates the help provided by users
>> on
>> >>the jfw list. A message that simply contains a "thank you" to members
>of
>> >>the list, although sent with the best of intentions, just increases the
>> >number
>> >>of messages members must filter through. If you want to thank people,
>> send
>> >>them private email.
>> >>the same goes for those very annoying messages that just say "me too"
>when
>> >>agreeing with another member. You might think that sending an agreement
>> >>message should be ok, but when 500 people all do it, it gets a bit much.
>> >>Holiday greetings can also be an annoyance when 500 people all do it.
>If
>> >you
>> >>are going to send a holiday greeting, it is likely that many others will
>> do
>> >>the same.
>> >>Finally, do not send or reply to any message that is a test. I and most
>> >>other people find these messages very annoying and replies just make it
>> >>worse.
>> >>
>> >>7. the list owner
>> >>This probably isn't a rule, but I thought I'd throw it in here to make
>> sure
>> >>people understand.
>> >>The list owner, that's me, has the right to unsubscribe anyone from the
>> >list
>> >>In the following circumstances.
>> >>1. If the person is being annoying.
>> >>2. If mail bounces back from the persons email address
>> >>
>> >>
>> >>
>> >>Contacting the list owner
>> >>You can contact the list owner via email at
>> >>[EMAIL PROTECTED], please allow 24 hours for a reply.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>> >-
>> >Visit the jfw ml web page: http://jfw.cjb.net
>>
>> -
>> Visit the jfw ml web page: http://jfw.cjb.net
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
Walter
-
Visit the jfw ml web page: http://jfw.cjb.net
