I tried it but it still didn't work. I opened sill30.ini and it had
genderlabel=male. It also has genderlo=1 and genderhi=1. Does this have
anything to do with it.
Sandi
At 10:37 PM 4/16/99 -0400, you wrote:
>Hello Sandi;
>
>When jfw 3.0 first came out I had a similar problem with my DoubleTalk Lt.
>Here is what solved the problem so I could adjust the voices in DoubleTalk.
>
>1 Go to the c:\windows folder and rename the ssil.ini to sill.old.
>2 Copy the c:\jfw30\ssil30.ini to the c:\windows folder.
>3 Rename the ssil30.ini to ssil.ini
>
>There is also a ssil30.ini file in the c:\jfw32 folder. If it does not work
>you can just rename the c:\windows\ssil.old back to ssil.ini and you are
>back where you started.
>I hope this will help.
>
>Dave
>
>
>At 09:24 PM 4/16/99 -0400 Dennis Brown Wrote:
>If the voices are listed, you should hear the changes! That ROM version
>should work just fine!
>Not sure what is going on there...perhaps sending a message to [EMAIL PROTECTED]
>will help.
>Is the DoubleTalk the only SSIL synthesizer you are using?
>
>Thanks,
>Dennis Brown, [EMAIL PROTECTED]
>Visit the BlindProgramming web site at
>http://brown99.home.mindspring.com
>
>
>-----Original Message-----
>From: Sandi Kelly <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Friday, April 16, 1999 8:38 PM
>Subject: Re: Doubletalk pc
>
>
>>Dennis, thanks. I have version 5.20. Is that to old to have the different
>>voices on it. When I go to my JFW voices menu and go to any of the setting
>>for the voices and then arrow down through the voice name options I don't
>>get a change of voice. Does this mean I need the upgrade?
>>At 07:01 PM 4/16/99 -0400, you wrote:
>>>The PC is internal, and the LT is external. On the utility disk, there is
>a
>>>test.com...run that file from a DOS prompt and it will give the ROM
>number.
>>>You'll need to put the screen reader to sleep when you do this or the test
>>>utility won't find the DoubleTalk.
>>>In JFW, use the Insert+J, then Alt+V to bring up the Voices menu. Within
>>>each voice, (Global, Keyboard, PcCursor, JawsCursor, Message, etc.), Tab
>>>down to "Person" and use Up/Down arrows to select the preferred voice. If
>>>your card is several years old, a ROM upgrade may be needed to get the
>>>different voices. It costs $35+- and can be installed by any set of
>>>eyeballs you may have around at the time.
>>>To get the chip upgrade, call Randy at RC Systems at 425-355-3800. You'll
>>>need to give him some info from the card, or the current ROM version.
>>>
>>>Thanks,
>>>Dennis Brown, [EMAIL PROTECTED]
>>>Visit the BlindProgramming web site at
>>>http://brown99.home.mindspring.com
>>>
>>>
>>>-----Original Message-----
>>>From: Sandi Kelly <[EMAIL PROTECTED]>
>>>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>>>Date: Friday, April 16, 1999 6:43 PM
>>>Subject: Doubletalk pc
>>>
>>>
>>>>Hi, I have asked a couple of questions about my doubletalk and then
>figured
>>>>out I have doubletalk pc. instead of doubletalk lt. I am trying to get
>the
>>>>voices to change and can't seem to do it. The names are read to me but
>they
>>>>are all in the same voice. I also don't know what version I have and
>don't
>>>>know how to figure it out. I have put the utilities disk in and don't
>know
>>>>where to look. If any one can help I would appreciate it.
>>>>
>>>>Also when I download 3.3 does that come with the new elquence or do I
>need
>>>>to download that separately.
>>>>Thanks.
>>>>Sandi
>>>>
>>>>-
>>>>Visit the jfw ml web page: http://jfw.cjb.net
>>>
>>>-
>>>Visit the jfw ml web page: http://jfw.cjb.net
>>>
>>
>>-
>>Visit the jfw ml web page: http://jfw.cjb.net
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
>Dave Maynard
>Franklin NC
>[EMAIL PROTECTED]
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
-
Visit the jfw ml web page: http://jfw.cjb.net
