so do I re-install jfw? also, do I need then to change the dip switch
positions on the sa?
Thanks!
Jerry Neufeld wrote:
>
> At 10:34 PM 4/24/99 -0400, David Poehlman wrote:
> >when I used 3.0 I had no problems with an accent sa. I've noticed
> >though with 3.2 and above that when reading messages or web pages for
> >instance, the accent reads a few lines of the screen and stops. has
> >anyone else noticed this and if so, is there a cure?
> >
> Hi David.
>
> I noticed something rather similar and, on a whim, changed my parameters
> to 7 data bits instead of 8, with one stop bit. You may have already done
> this, of course. For some reason, Accentsa seems to like this better.
> Good luck.
>
> Jerry
> >--
> >Hands-On Technolog(eye)s
> >Touching The Internet:
> >mailto:[EMAIL PROTECTED]
> >Voice: 301.949.7599
> >ftp://ftp.clark.net/pub/poehlman
> >http://poehlman.clark.net
> >Dynamic Solutions Inc.
> >Best of service
> >for your small business
> >network needs!
> >http://www.dnsolutions.com
> >
> >---sig off---
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
>
> Jerry
>
> -
> Visit the jfw ml web page: http://jfw.cjb.net
--
Hands-On Technolog(eye)s
Touching The Internet:
mailto:[EMAIL PROTECTED]
Voice: 301.949.7599
ftp://ftp.clark.net/pub/poehlman
http://poehlman.clark.net
Dynamic Solutions Inc.
Best of service
for your small business
network needs!
http://www.dnsolutions.com
---sig off---
-
Visit the jfw ml web page: http://jfw.cjb.net
