Hello
Vince's message contained an error. He has the order in which the files
should be installed reversed. Below is an excerpt from HJ Technical support
notice 26. The only thing I might add is that setting the reset frequency
to 0 seems to have helped the speech quality on a slower (233 MHz with 48 Mb
of ram) system.
You should install the files for Microsoft Speech before you install
JFW3.3.
Best regards
Gator
>From TSM26
In order to install the MS Speech Engine as one of your synthesizers, first
you must run two executable files (spchapi.exe and mstts.exe)in the proper
order for it to work correctly.
These files are located in the Root of the JFW 3.3 CD in a Folder called:
d:\msspeech
Solution:
Launch MS-Explorer, then go to your CD-ROM drive (usually it is designated
as the D drive letter) where you have the JFW 3.3 CD.
Open the MSSPEECH folder and execute spchapi.exe first, then execute the
mstts.exe (failure to execute these in this order, may result in the MS
Speech Engine not working).
When using the MS Speech Engine as your default synthesizer the same global
person should be selected for all voices (you can change pitch and speed).
Do not mix and match different person voices.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Vince Tomassetti
Sent: Wednesday, June 02, 1999 5:59 PM
To: [EMAIL PROTECTED]
Subject: RE: Microsoft speech
Hi
Did you install the two files required for MS Speech?
1. msttsl
2. spchapi
It's recomended that these files be installed in the above order.
If you didn't install the spchapi.exe file then there is a very long pause
before JFW announces the new voice when changing voices.
Could this be the problem?
Vince.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Louis Lucero
Sent: Wednesday, June 02, 1999 8:56 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Microsoft speech
Listers,
I forgot to add this... that the version of MS Speech that I am using does
work in K1000. But it does not work on my JFW at home or work. Any ideas?
At 09:30 AM 5/24/99 -0700, you wrote:
> Hi Listers,
>
>I downloaded the Microsoft speech from somewhere and did install it with my
>JFW 3.3. When I bring it up and try to down arrow through the different
>voices only the first default voice is heard. Is anybody else having this
>problem?
>
>
>Louis A. Lucero ([EMAIL PROTECTED])
>Director of Disabled Student Services
>Antelope Valley College
>3041 West Avenue K
>Lancaster, CA 93536
>voice: (661) 722-6300 ext. 6161
>TDD: (661) 722-6362
>fax: (661) 722-6361
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
Louis A. Lucero ([EMAIL PROTECTED])
Director of Disabled Student Services
Antelope Valley College
3041 West Avenue K
Lancaster, CA 93536
voice: (661) 722-6300 ext. 6161
TDD: (661) 722-6362
fax: (661) 722-6361
-
Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
