Hi Walter,
It is created through TweakUi and is placed in the C:\Windows folder.
If you have TweakUi installed, select it from the Control Panel and
Control+Tab to the last dialog, named "Paranoia." You can select "Write
errors to fault log?" option. Anytime you get a system error, it is
appended to the faultlog.txt file.
Thanks,
Dennis Brown, [EMAIL PROTECTED]
Visit the Blind Programming site at http://www.mindspring.com/~brown99/
----- Original Message -----
From: Walter Siren <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 06, 1999 2:37 PM
Subject: Re: Illegal Operations all the time
> Where do you find the fault log? I used the find command, but I could not
> find it.
> At 01:20 PM 6/6/99 -0400, you wrote:
> >Steve,
> >
> >I looked back through my Windows 98 Fault Log, and I found a number of
> >instances where JFW caused errors in Explorer since I installed JFW 3.3.
I
> >plan to copy one of these entries from the Fault Log and email it to
> >[EMAIL PROTECTED] I would suggest that others who are having this problem do
> >likewise.
> >
> >As for the sluggishness with Eloquence in JFW 3.2, the MS Speech you
> >installed comes with a .DLL file that makes Eloquence act this way. If
you
> >are not using the new Eloquence with JFW 3.2, you might try installing it
> >to see if it works better.
> >
> >Gary, [EMAIL PROTECTED]
> >
> >At 08:28 PM 6/6/99 +1000, you wrote:
> >>Hi List,
> >>
> >>Well I am running JFW 3.3 with the patch which makes it something like
[JFW
> >>3.3.025]
> >>Well here is the problem.
> >>Ever since I have been running JFW 3.3.025 I have been getting a couple
of
> >>** Windows Error Messages**
> >>
> >>I.E.
> >>Explorer Dialogue this programme has performed an Illegal Operation if
the
> >>problem persists contact your vendor.
> >>
> >>Another thing that happens is that I can be in any Programme and go to
> >>close it so that I can close down the computer.
> >>But I will be presented with a box that says something like the current
> >>programme is not responding press OK to close or wait a certain ammount
of
> >>seconds which I cant remember the value but anyway it sits there for
ever.
> >>
> >>Also I also noticed that when I recieved my C D with JFW3.3 on it I
> >>installed the Microsoft Speech I folowed the install instructions in the
> >>Install.Txt file that came with it to the letter.
> >>Anyway I noticed that when I had installed it my JFW 3.2 that I still
had
> >>installed on my computer Slowed down in performance ** Dramatically **
> >>For instants I could press a key and then wait up to 3 seconds for
> >>Elequense to announce it.
> >>This problem only happend after I installed Microsoft Speech and the
othe
> >>other fileMSaapy or something like that.
> >>I will list below my System amd operating system below.
> >>
> >>1: Pentium 2 [ Not a Cellaron ]
> >>
> >>2: 64 Megs of Ram
> >>
> >>3: S3 Virge DX/GX 2 Meg Video Card
> >>
> >>4: 3.2 Gig Hard Drive.
> >>
> >>5: Operating System [ Windows 95 Version B ]
> >>
> >>6: I also Have JFW3.2 and JFW 3.3 both installed on my system
because
> >>I still use some of the features in JFW 3.2 and Vice Versa.
> >>
> >>
> >>
> >>Any Help would be great.
> >>
> >>Regards to all.
> >>
> >>Steve...
> >>-
> >>Visit the jfw ml web page: http://jfw.cjb.net
> >>
> >>
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
> >
> >
> Walter
> -
> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
