Hi Glenn,  I used to use the same setup although the specs on my pc were
different - 32ram, 1.5gb hard drive, 233Mhz, as I recall.  I also found that
after unloading JFW3.2 and loading Openbook 3.5U, although it appeared okay,
when you go to scan the first page of something it would beep a couple of
times and say something about the scanner not online or couldn't be found,
or something like that - I really can't remember.  It often said to check
the serial card and cable connections, which at first I often did.  After a
while when there wasn't anything out of the ordinary going on with the card
or cable, I learned to just go ahead and try to scan again and more than not
it would work just fine.  When it didn't, I found that if I unloaded
Openbook and reloaded it, it would be okay.  When that failed, I would again
unload Openbook, and do a restart on the pc, and that always took care of
it.  There was never a time that I couldn't finally get it working.  You may
have experienced all that, too, but since I could relate to your message, I
thought I would let you know of my experience.  Good luck with it.
Todd Eggert
-----Original Message-----
From: Glenn LeMacher <[EMAIL PROTECTED]>
To: JFW <[EMAIL PROTECTED]>
Date: Thursday, June 10, 1999 10:03 AM
Subject: Open book


>I sure hope someone can help. I have windows 95 on my system along with
>J.F.W.s version 3.3 , I also have a H.P. scanner version 5100 along with
>Open book version 3.5 U. On my computer I have 64K.Rom along with a 4.3
G.B.
>hard drive.To my problem, when I first boot up I have the scanner turned on
>like they say one should. Before I go into Open book I unload J.F.W.s from
>memory.When I go to use Open book sometimes it will work fine but other
>times the computer will say scanner is out of memory. Other times the
>computer will just lock up .I have a sighted friend and he set this up to
>Arkenstones specks.
>I'am just at a loss, might someone be able to help"?
>THANKS in advance
>Glenn L.
>
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>

-
Visit the jfw ml web page: http://jfw.cjb.net

Reply via email to