Hi Muhammad,
If you already have one Braille display installed, you may be able to add
the needed lines to your JFW.INI and the files to your \JFW33 folder. You
will however require the latest driver, which comes with instructions, from
Blazie Engineering. You can write to [EMAIL PROTECTED] and he should be able
to provide them, or I will send you a private attachment if you write
directly to me.
In my experience, you will need to reinstall JFW3 if you have not already
installed a Braille display. This is because you cannot just insert the
information needed into the JFW.INI alone as the display also needs further
files which are installed with your first Braille display.
Before you install, ensure you have your BLT connected and turned on and
that you issue the command Dots 345,P-CHORD to switch on the speechbox mode
in the appropriate manner. This is also switched off by the same means.
By the way, I had considerable difficulty trying to install my BLT 40 with
JAWS 3.2 because I was adding it to my JFW.INI and not going through the
steps outlined above, so please bear this in mind.
Hope this helps.
--
Carol Pearson
[EMAIL PROTECTED]
-
Visit the jfw ml web page: http://jfw.cjb.net
