Hello Krajczar,
I just had Eloquence loading whenever Notepad was executed, and
DoubleTalk-PC load when exiting Notepad...no problems.
Thanks,
Dennis Brown, [EMAIL PROTECTED]
Visit the Blind Programming site at http://brown99.home.mindspring.com/
----- Original Message -----
From: Krajczar Tech Center, Damon Fibraio <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 13, 1999 7:51 AM
Subject: Re: Re: Ticket No. 45121 FW: switching to doubletalk pc from
eloquence locks up machine with 3.3.26
> If this is the case, then why did my dbltalk work with the timed
> evaluation? I will check my disk for the drivers, but I didn't need them
> beore, I bought the dbltalk in 1997, used it with asaw, then wineyes 2.1,
> then jfw 3.2, then wineyes 3.1 and then the timed evaluation of 3.3
without
> significant problems. Why now? The timed evaluation was 3.3.26. The
version
> I ahve now is 3.3.26. Only difference is the authorization used. Don't
> understand. The only thing I can think to do is reinstall JFW and sew aht
> happens.
> At 09:15 AM 9/13/99 , you wrote:
> > hello , I also had that problem were my computer would lock up
after
> >switching from eliquence too dbl talk. the problem was that I had too
> >install the ssil drivers that came with dbltalk into the jfw33 dir or if
> >you do not have the disk download it of the www.rcsys.com page. jfw do
not
> >include the correct drivers since dbl talk changed after 33 came out.
> >hope that helps.
> >louis
> >
> >----- Original Message -----
> >From: Krajczar Tech Center, Damon Fibraio <[EMAIL PROTECTED]>
> >To: JFW mailing list <[EMAIL PROTECTED]>
> >Sent: Monday, September 13, 1999 8:33 AM
> >Subject: Fwd: Re: Ticket No. 45121 FW: switching to doubletalk pc from
> >eloquence locks up machine with 3.3.26
> >
> >
> > > I am beginning to wonder about tech support here. I wrote in about how
> >when
> > > I switch to Doubletalk PC from eloquence, the system locks up. this
> > > doeesn't happen in wineyes. It also doesn't happen when I switch to
> > > software synths in JFW, just the doubletalk PC. This is what HJ suppot
> >sent
> > > me. I am begining to wonder if I just know too much or if they don't
know
> > > enough.
> > >
> > > Dear Mr. Fibraio:
> > >
> > > >Apparently the support software for the Double Talk PC wasn't
properly
> > > >installed. You should contact RC Systems for help installing their
> > > >synthesizer.
> > > >
> > > >_____________________________________________________________
> > > >The following additional resources are available for technical
support:
> > > >fax us at (727) 803-8001, contact us directly at (727) 803-8600, and
use
> > > >
> > > >option 1 for Resellers and On-Site technicians,
> > > >option 2 for JAWS technical support,
> > > >option 3 for JAWS voice mail,
> > > >option 4 for MAGic technical support,
> > > >
> > > >or visit our web site at
> > > >
> > > ><http://www.hj.com/TechSupport/TechSupport.html>
> > > >
> > > >Thank you for choosing Henter-Joyce--We make computers talk!
> > > >
> > > >Dennis G. Godin
> > > >Henter-Joyce Technical Support Specialist
> > > >Technical Support Services
> > > >|Henter-Joyce, Inc.
> > > >At 02:58 PM 9/9/99 -0400, you wrote:
> > > >>mportance: Norma
> > > >>
> > > >>-----Original Message-----
> > > >>From: Krajczar Tech Center, Damon Fibraio
> > > >>[mailto:[EMAIL PROTECTED]]
> > > >>Sent: Thursday, September 09, 1999 2:24 PM
> > > >>To: [EMAIL PROTECTED]
> > > >>Subject: switching to doubletalk pc from eloquence locks up machine
with
> > > >>3.3.26
> > > >>
> > > >>
> > > >>I just did a full reinstall of my computer, including a format. I
> >installed
> > > >>a newly pruchased full copy of jfw 3.3.26. I installed Eloquence,
> >flextalk,
> > > >>doubletalk pc, and microsoft speech as my speech engines. When I
> >switched
> > > >>to thedoubletalk pc the other day, the machine froze solid. no
errors,
> >no
> > > >>nothing. I could not really control alt delete out, either. Why
would
> >this
> > > >>happen?
> > > >>I can be reached at [EMAIL PROTECTED] or [EMAIL PROTECTED]
> > > >>
> > > >> --
> > > >>Damon Fibraio, -- Associate for Technical Support, De Witt and
> >Associates
> > > >>Norma Krajczar Technology, Resource, and Developement Center
> > > >>Open to the general public, call with questions or to make an
> >appointment
> > > >>130 Livingston Ave.
> > > >>new Brunswick, NJ 08901
> > > >>phone: 732-937-6394, fax 732-729-6561
> > > >>email: [EMAIL PROTECTED]
> > > >
> > > >
> > > >
> > > >_____________________________________________________________
> > > >Dennis G. Godin
> > > >Henter-Joyce Technical Specialist
> > > >Henter-Joyce, Inc.
> > > >We Make Computers Talk
> > > >Voice: (727) 803-8600
> > > >Fax: (727) 803-8001
> > > >Home Page: <http://www.hj.com/TechSupport/TechSupport.html>
> > > >FTP Site: <ftp://ftp.hj.com>
> > > >_____________________________________________________________
> > >
> > > --
> > > Damon Fibraio, -- Associate for Technical Support, De Witt and
Associates
> > > Norma Krajczar Technology, Resource, and Developement Center
> > > Open to the general public, call with questions or to make an
appointment
> > > 130 Livingston Ave.
> > > new Brunswick, NJ 08901
> > > phone: 732-937-6394, fax 732-729-6561
> > > email: [EMAIL PROTECTED]
> > > -
> > > Visit the jfw ml web page: http://jfw.cjb.net
> > >
> >
> >-
> >Visit the jfw ml web page: http://jfw.cjb.net
>
> --
> Damon Fibraio, -- Associate for Technical Support, De Witt and Associates
> Norma Krajczar Technology, Resource, and Developement Center
> Open to the general public, call with questions or to make an appointment
> 130 Livingston Ave.
> new Brunswick, NJ 08901
> phone: 732-937-6394, fax 732-729-6561
> email: [EMAIL PROTECTED]
> -
> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
