Re: Re: Ticket No. 45121 FW: switching to doubletalk pc from eloquence locks up machine with 3.3.26

[Krajczar Tech Center, Damon Fibraio]

Thanks, dennis. It is probably my system then. Things have been a bit flaky 
since the reformat. Last night, Eudora crashed twice while downloading 
mail, this never happens. The actual message was something along the lines 
of eudora caused an invalid page fault in eudora.exe, then gave a ton of 
registers, but I didn'tpay attention to that. After two or three attempts, 
it behaved. Also, my CD burner, after trying to do a cd copy doesn't want 
to take any CDs, even though they are blank. Very strange. Was working last 
week. Don't get it. I guess something was whacked when I installed office 
2000 this weekend. Oh well, guess I gotta just deal with it. By the way, 
the name is Damon. I am definitely going to change that thing.
At 09:08 PM 9/13/99 , you wrote:
>Hello Krajczar,
>I just had Eloquence loading whenever Notepad was executed, and
>DoubleTalk-PC load when exiting Notepad...no problems.
>
>Thanks,
>Dennis Brown, [EMAIL PROTECTED]
>Visit the Blind Programming site at http://brown99.home.mindspring.com/
>
>
>----- Original Message -----
>From: Krajczar Tech Center, Damon Fibraio <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Monday, September 13, 1999 7:51 AM
>Subject: Re: Re: Ticket No. 45121 FW: switching to doubletalk pc from
>eloquence locks up machine with 3.3.26
>
>
> > If this is the case, then why did my dbltalk work with the timed
> > evaluation? I will check my disk for the drivers, but I didn't need them
> > beore, I bought the dbltalk in 1997, used it with asaw, then wineyes 2.1,
> > then jfw 3.2, then wineyes 3.1 and then the timed evaluation of 3.3
>without
> > significant problems. Why now? The timed evaluation was 3.3.26. The
>version
> > I ahve now is 3.3.26. Only difference is the authorization used. Don't
> > understand. The only thing I can think to do is reinstall JFW and sew aht
> > happens.
> > At 09:15 AM 9/13/99 , you wrote:
> > >         hello , I also had that problem were my computer would lock up
>after
> > >switching from eliquence too dbl talk.  the problem was that I had too
> > >install the ssil drivers that came with dbltalk into the jfw33 dir  or if
> > >you do not have the disk download it of the www.rcsys.com page.  jfw do
>not
> > >include the correct drivers since dbl talk changed after 33 came out.
> > >hope that helps.
> > >louis
> > >
> > >----- Original Message -----
> > >From: Krajczar Tech Center, Damon Fibraio <[EMAIL PROTECTED]>
> > >To: JFW mailing list <[EMAIL PROTECTED]>
> > >Sent: Monday, September 13, 1999 8:33 AM
> > >Subject: Fwd: Re: Ticket No. 45121 FW: switching to doubletalk pc from
> > >eloquence locks up machine with 3.3.26
> > >
> > >
> > > > I am beginning to wonder about tech support here. I wrote in about how
> > >when
> > > > I switch to Doubletalk PC from eloquence, the system locks up. this
> > > > doeesn't happen in wineyes. It also doesn't happen when I switch to
> > > > software synths in JFW, just the doubletalk PC. This is what HJ suppot
> > >sent
> > > > me. I am begining to wonder if I just know too much or if they don't
>know
> > > > enough.
> > > >
> > > > Dear Mr. Fibraio:
> > > >
> > > > >Apparently the support software for the Double Talk PC wasn't
>properly
> > > > >installed.  You should contact RC Systems for help installing their
> > > > >synthesizer.
> > > > >
> > > > >_____________________________________________________________
> > > > >The following additional resources are available for technical
>support:
> > > > >fax us at (727) 803-8001, contact us directly at (727) 803-8600,  and
>use
> > > > >
> > > > >option 1 for Resellers and On-Site technicians,
> > > > >option 2 for JAWS technical support,
> > > > >option 3 for JAWS voice mail,
> > > > >option 4 for MAGic technical support,
> > > > >
> > > > >or visit our web site at
> > > > >
> > > > ><http://www.hj.com/TechSupport/TechSupport.html>
> > > > >
> > > > >Thank you for choosing Henter-Joyce--We make computers talk!
> > > > >
> > > > >Dennis G. Godin
> > > > >Henter-Joyce Technical Support Specialist
> > > > >Technical Support Services
> > > > >|Henter-Joyce, Inc.
> > > > >At 02:58 PM 9/9/99 -0400, you wrote:
> > > > >>mportance: Norma
> > > > >>
> > > > >>-----Original Message-----
> > > > >>From: Krajczar Tech Center, Damon Fibraio
> > > > >>[mailto:[EMAIL PROTECTED]]
> > > > >>Sent: Thursday, September 09, 1999 2:24 PM
> > > > >>To: [EMAIL PROTECTED]
> > > > >>Subject: switching to doubletalk pc from eloquence locks up machine
>with
> > > > >>3.3.26
> > > > >>
> > > > >>
> > > > >>I just did a full reinstall of my computer, including a format. I
> > >installed
> > > > >>a newly pruchased full copy of jfw 3.3.26. I installed Eloquence,
> > >flextalk,
> > > > >>doubletalk pc, and microsoft speech as my speech engines. When I
> > >switched
> > > > >>to thedoubletalk pc the other day, the machine froze solid. no
>errors,
> > >no
> > > > >>nothing. I could not really control alt delete out, either. Why
>would
> > >this
> > > > >>happen?
> > > > >>I can be reached at [EMAIL PROTECTED] or [EMAIL PROTECTED]
> > > > >>
> > > > >>         --
> > > > >>Damon Fibraio, -- Associate for Technical Support, De Witt and
> > >Associates
> > > > >>Norma Krajczar Technology, Resource, and Developement Center
> > > > >>Open to the general public, call with questions or to make an
> > >appointment
> > > > >>130 Livingston Ave.
> > > > >>new Brunswick, NJ 08901
> > > > >>phone: 732-937-6394, fax 732-729-6561
> > > > >>email: [EMAIL PROTECTED]
> > > > >
> > > > >
> > > > >
> > > > >_____________________________________________________________
> > > > >Dennis G. Godin
> > > > >Henter-Joyce Technical Specialist
> > > > >Henter-Joyce, Inc.
> > > > >We Make Computers Talk
> > > > >Voice: (727) 803-8600
> > > > >Fax: (727) 803-8001
> > > > >Home Page: <http://www.hj.com/TechSupport/TechSupport.html>
> > > > >FTP Site: <ftp://ftp.hj.com>
> > > > >_____________________________________________________________
> > > >
> > > > --
> > > > Damon Fibraio, -- Associate for Technical Support, De Witt and
>Associates
> > > > Norma Krajczar Technology, Resource, and Developement Center
> > > > Open to the general public, call with questions or to make an
>appointment
> > > > 130 Livingston Ave.
> > > > new Brunswick, NJ 08901
> > > > phone: 732-937-6394, fax 732-729-6561
> > > > email: [EMAIL PROTECTED]
> > > > -
> > > > Visit the jfw ml web page: http://jfw.cjb.net
> > > >
> > >
> > >-
> > >Visit the jfw ml web page: http://jfw.cjb.net
> >
> > --
> > Damon Fibraio, -- Associate for Technical Support, De Witt and Associates
> > Norma Krajczar Technology, Resource, and Developement Center
> > Open to the general public, call with questions or to make an appointment
> > 130 Livingston Ave.
> > new Brunswick, NJ 08901
> > phone: 732-937-6394, fax 732-729-6561
> > email: [EMAIL PROTECTED]
> > -
> > Visit the jfw ml web page: http://jfw.cjb.net
>
>-
>Visit the jfw ml web page: http://jfw.cjb.net

        --
Damon Fibraio, -- Associate for Technical Support, De Witt and Associates
Norma Krajczar Technology, Resource, and Developement Center
Open to the general public, call with questions or to make an appointment
130 Livingston Ave.
new Brunswick, NJ 08901
phone: 732-937-6394, fax 732-729-6561
email: [EMAIL PROTECTED]
-
Visit the jfw ml web page: http://jfw.cjb.net