strace crashed with SIGILL in __GI_raise() is what the crash report shows.
Not sure how to get this crash report. It is sending an error report and it
must be going to Ubuntu developer site.
lseek(2, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
rt_sigreturn() = 27531024
--- SIGILL {si_signo=SIGILL, si_code=ILL_ILLOPN, si_addr=0x7fe111341e44} ---
+++ killed by SIGILL (core dumped) +++
Illegal instruction (core dumped)
On Sun, Jan 26, 2014 at 8:00 PM, Rajan Gurjar <rjngrj2...@gmail.com> wrote:
> I did usr/bin/julia-debug-basic instead. It ran for a while and then
> closed after giving a system error warning.
> And the terminal screen rolls down with lots of data. Is it supposed to
> create an image that I should post?
> Not clear. I also see julia-debug-readline but no julia.
> Thanks
>
>
> On Sun, Jan 26, 2014 at 7:52 PM, Rajan Gurjar <rjngrj2...@gmail.com>wrote:
>
>> rajan@rajan-Aspire-5742Z:~/julia/base$ strace /usr/bin/julia --build
>> output sysimg.jl
>> strace: Can't stat '/usr/bin/julia': No such file or directory
>>
>>
>>
>> On Sun, Jan 26, 2014 at 7:41 PM, Elliot Saba <staticfl...@gmail.com>wrote:
>>
>>> Nope, sometimes VMs can cause an illegal instruction error.
>>>
>>> What is the output of `strace ../usr/bin/julia --build output
>>> sysimg.jl`? Execute that inside of the `base` folder.
>>> -E
>>>
>>>
>>> On Sun, Jan 26, 2014 at 4:19 PM, Rajan Gurjar <rjngrj2...@gmail.com>wrote:
>>>
>>>> No, but I do have a VM installed. Not using it though for Julia.
>>>> Do you think I should try it instead?
>>>>
>>>>
>>>> On Sun, Jan 26, 2014 at 6:18 PM, Elliot Saba <staticfl...@gmail.com>wrote:
>>>>
>>>>> Rajan, are you running inside of a VM?
>>>>>
>>>>>
>>>>> On Sun, Jan 26, 2014 at 1:46 PM, Rajan Gurjar <rjngrj2...@gmail.com>wrote:
>>>>>
>>>>>> Just tried "make debug" after "make clean"
>>>>>> but exactly the same output as before
>>>>>> LINK usr/bin/julia-debug-readline
>>>>>> CC ui/repl-basic.do
>>>>>> LINK usr/bin/julia-debug-basic
>>>>>>
>>>>>> osutils.jl
>>>>>> Illegal instruction (core dumped)
>>>>>> make[1]: *** [/home/rajan/julia/usr/lib/julia/sys0.bc] Error 132
>>>>>> make: *** [debug] Error 2
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sun, Jan 26, 2014 at 3:54 PM, Rajan Gurjar
>>>>>> <rjngrj2...@gmail.com>wrote:
>>>>>>
>>>>>>> processor : 0
>>>>>>> vendor_id : GenuineIntel
>>>>>>> cpu family : 6
>>>>>>> model : 37
>>>>>>> model name : Intel(R) Pentium(R) CPU P6100 @ 2.00GHz
>>>>>>> stepping : 5
>>>>>>> microcode : 0x2
>>>>>>> cpu MHz : 933.000
>>>>>>> cache size : 3072 KB
>>>>>>> physical id : 0
>>>>>>> siblings : 2
>>>>>>> core id : 0
>>>>>>> cpu cores : 2
>>>>>>> apicid : 0
>>>>>>> initial apicid : 0
>>>>>>> fpu : yes
>>>>>>> fpu_exception : yes
>>>>>>> cpuid level : 11
>>>>>>> wp : yes
>>>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
>>>>>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
>>>>>>> syscall
>>>>>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
>>>>>>> nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr
>>>>>>> pdcm pcid popcnt lahf_lm arat dtherm
>>>>>>> bogomips : 3990.03
>>>>>>> clflush size : 64
>>>>>>> cache_alignment : 64
>>>>>>> address sizes : 36 bits physical, 48 bits virtual
>>>>>>> power management:
>>>>>>>
>>>>>>> processor : 1
>>>>>>> vendor_id : GenuineIntel
>>>>>>> cpu family : 6
>>>>>>> model : 37
>>>>>>> model name : Intel(R) Pentium(R) CPU P6100 @ 2.00GHz
>>>>>>> stepping : 5
>>>>>>> microcode : 0x2
>>>>>>> cpu MHz : 1999.000
>>>>>>> cache size : 3072 KB
>>>>>>> physical id : 0
>>>>>>> siblings : 2
>>>>>>> core id : 2
>>>>>>> cpu cores : 2
>>>>>>> apicid : 4
>>>>>>> initial apicid : 4
>>>>>>> fpu : yes
>>>>>>> fpu_exception : yes
>>>>>>> cpuid level : 11
>>>>>>> wp : yes
>>>>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
>>>>>>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
>>>>>>> syscall
>>>>>>> nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology
>>>>>>> nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr
>>>>>>> pdcm pcid popcnt lahf_lm arat dtherm
>>>>>>> bogomips : 3990.03
>>>>>>> clflush size : 64
>>>>>>> cache_alignment : 64
>>>>>>> address sizes : 36 bits physical, 48 bits virtual
>>>>>>> power management:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sun, Jan 26, 2014 at 2:27 PM, Jameson Nash <vtjn...@gmail.com>wrote:
>>>>>>>
>>>>>>>> I think he mentioned this was a clean build, from scratch.
>>>>>>>>
>>>>>>>> Rajan, what's your processor? also try `make debug` and see if that
>>>>>>>> prints anything more when in crashes
>>>>>>>>
>>>>>>>> On Sun, Jan 26, 2014 at 2:21 PM, Tim Holy <tim.h...@gmail.com>
>>>>>>>> wrote:
>>>>>>>> > On Sunday, January 26, 2014 11:16:24 AM Rajn wrote:
>>>>>>>> >> Bump anyone? What does this mean? Next steps please?
>>>>>>>> >
>>>>>>>> > Have you tried "make clean; make"?
>>>>>>>> > --Tim
>>>>>>>> >
>>>>>>>> >>
>>>>>>>> >> osutils.jl
>>>>>>>> >> Illegal instruction (core dumped)
>>>>>>>> >> make[1]: *** [/home/rajan/julia/usr/lib/
>>>>>>>> >> julia/sys0.bc] Error 132
>>>>>>>> >> make: *** [release] Error 2
>>>>>>>> >>
>>>>>>>> >> On Friday, January 24, 2014 10:30:18 PM UTC-5, Rajn wrote:
>>>>>>>> >> > After my several failed attempts to run PyPlot through Julia
>>>>>>>> in Windows, I
>>>>>>>> >> > decided to give up and try Linux.
>>>>>>>> >> > Guess it was even worse.
>>>>>>>> >> >
>>>>>>>> >> > First I added to regular repository (not the nightlybuild)
>>>>>>>> >> > then added the dep-repository
>>>>>>>> >> > then updated and
>>>>>>>> >> > then installed julia
>>>>>>>> >> >
>>>>>>>> >> > Here's the latest:
>>>>>>>> >> > Unpacking librmath-dev (from
>>>>>>>> >> > .../librmath-dev_2.15.2-juliadeps2~raring_amd64.deb) ...
>>>>>>>> >> > dpkg: error processing
>>>>>>>> >> >
>>>>>>>> /var/cache/apt/archives/librmath-dev_2.15.2-juliadeps2~raring_amd64.deb
>>>>>>>> >> >
>>>>>>>> >> > (--unpack):
>>>>>>>> >> > trying to overwrite '/usr/include/Rmath.h', which is also in
>>>>>>>> package
>>>>>>>> >> >
>>>>>>>> >> > r-mathlib 3.0.1-3ubuntu1
>>>>>>>> >> > No apport report written because MaxReports is reached already
>>>>>>>> >> >
>>>>>>>> >> >
>>>>>>>> Selecting
>>>>>>>> >> >
>>>>>>>> >> > previously unselected package julia.
>>>>>>>> >> > Unpacking julia (from .../julia_0.2.0~saucyfinal1_amd64.deb)
>>>>>>>> ...
>>>>>>>> >> > Processing triggers for man-db ...
>>>>>>>> >> >
>>>>>>>> >> > Errors were encountered while processing:
>>>>>>>> >> >
>>>>>>>>
>>>>>>>> /var/cache/apt/archives/librmath-dev_2.15.2-juliadeps2~raring_amd64.deb
>>>>>>>> >> >
>>>>>>>> >> > E: Sub-process /usr/bin/dpkg returned an error code (1)
>>>>>>>> >> >
>>>>>>>> >> > Have no clue absolutely how to proceed. The same issue occurs
>>>>>>>> when I try
>>>>>>>> >> > nightly builds.
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
