Many thanks to all your reply . It's running now, under the same config i have posted. I made a bit mistake in the netflow tool. Now for the next ques, any comments?? I want to run accounting feature on the same M7i.
Regards Farhan Jaffer On 12/16/06, Farhan Jaffer <[EMAIL PROTECTED]> wrote: > > I want to configure netflow on Juniper M7i having Junos version 7.6R1.10, > just like ip flow-export & ip route-cache flow (related) commands in Cisco > IOS. Also i like to enable cache flow or ip accounting on any fast ethernet > interface when needed. > Kindly help me to solve this. > > I have configured router for netflow feature using these command, but it > didn't work > > interfaces { > fe-0/3/0 { > unit 0 { > family inet { > filter { > input all; > output all; > } > address 10.0.0.1/24; > } > } > } > > firewall { > filter all { > term all { > then { > sample; > accept; > } > } > } > } > > forwarding-options { > sampling { > input { > family inet { > rate 100; > } > } > output { > cflowd 10.0.0.100 { > port 9800; > version 5; > } > } > } > } > > Any comments ?? > > Thanks in advance. > > -- > Regards, > Farhan Jaffer > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp