Hi Team, I'm working on multiple OSPF instance (each on its own vrf) described on th scenario bellow :
R1, R2 (M20) and my R3(M7i) are connected on the same L2 switch (same area 0.0.0.1) R1 and R2 already established OSPF election and can exchange their route under OSPF, but M7i Ospf still fail to come up , bellow the configuration on M7i : set routing-instances gn-vrf instance-type vrf set routing-instances gn-vrf interface ge-1/3/0.101 || this is the sub-if where R1/R2 are connected set routing-instances gn-vrf interface ge-1/3/0.103 set routing-instances gn-vrf interface ge-1/3/0.104 set routing-instances gn-vrf route-distinguisher 64512:30 set routing-instances gn-vrf vrf-import gn-import set routing-instances gn-vrf vrf-export gn-export set routing-instances gn-vrf routing-options static route 0.0.0.0/0 next-hop 192.168.151.17 set routing-instances gn-vrf protocols ospf area 0.0.0.1 interface ge-1/3/0.101 NB : from the M7i the ping under the routing-instances gn-vrf to R1 and R2 directly connected interfaces are ok via sub-if ge-1/3/0.101 [EMAIL PROTECTED]> show ospf neighbor OSPF instance is not running When i enable traffic-engineering under the routing-instances the OSPF is running : [EMAIL PROTECTED] set protocols ospf traffic-engineering || and commit [EMAIL PROTECTED]> show ospf neighbor [EMAIL PROTECTED]> but there is no neighbor. Can any one please help me on resolving this issue. Best ones Mounir _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp