Is it just me, or is the JunOS documentation for Ethernet MAC address accounting incredibly obtuse?
I am connected to an IX on GigE shared L2 - so I would like to count number of bytes and packets transmitted to and received from each BGP peer, based on the MAC address of the peer. This would seem to be a rather common task, but I haven't found a good way to do this yet. http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-network-interfaces/html/interfaces-ethernet-config68.html#1082075 lists "MAC accounting" as one of the capabilities of both GigE IQ and regular GigE (SFP) PICs. On http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-network-interfaces/html/interfaces-ethernet-config80.html#1082331 the heading says "Configuring MAC Address Accounting" - but the rest of the page says nothing about how to count packets based on MAC address. What am I missing here? Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
