On Sat, Mar 17, 2007 at 09:41:03PM +0100, [EMAIL PROTECTED] wrote:
> Is it just me, or is the JunOS documentation for Ethernet MAC address
> accounting incredibly obtuse?
>
> I am connected to an IX on GigE shared L2 - so I would like to count
> number of bytes and packets transmitted to and received from each BGP
> peer, based on the MAC address of the peer. This would seem to be a
> rather common task, but I haven't found a good way to do this yet.
[EMAIL PROTECTED] show interfaces ge-1/0/0
description "BN: AMS-IX";
link-mode full-duplex;
gigether-options {
ethernet-switch-profile {
mac-learn-enable;
}
}
unit 0 {
family inet {
rpf-check {
mode loose;
}
- Jared
>
> http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-network-interfaces/html/interfaces-ethernet-config68.html#1082075
>
> lists "MAC accounting" as one of the capabilities of both GigE IQ and
> regular GigE (SFP) PICs. On
>
> http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-network-interfaces/html/interfaces-ethernet-config80.html#1082331
>
> the heading says "Configuring MAC Address Accounting" - but the rest of
> the page says nothing about how to count packets based on MAC address.
>
> What am I missing here?
>
> Steinar Haug, Nethelp consulting, [EMAIL PROTECTED]
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Jared Mauch | pgp key available via finger from [EMAIL PROTECTED]
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
